Posts by turner123

hi, its actually a nice feeling that i now understand what this guy is doing/trying, what these guys have passed onto you is all you need to get started they gave me exactly the same info and now im running my own.

if you are using the auto install script (i did many times) replace the oscam thats in there and DL the newer one 1.20 6801 and replace make sure its named just it "oscam" that way you will be upto date with oscam :) from the start :)

i also installed the omnikey and got confused, i did do mine correctly after a while sitting and thinking about it but then i copied and pasted the contents of the opensc file into opensc delete its contents 1st crtl+k and paste in then crtl+o then enter then crtl+x job done just to be 100% sure i did do it rite

also using nano is great for editing the cccam.cfg file to add your lines :) i actually now do that from my iphone4 using issh so no need to actually use the pc can even login to the webif on phone too

im sure if you follow the thread i started from knowing not much just a few days ago alot of questions you may have may well clear up any confusion cause believe me i was CONFUSED lol :beated:

Rite quick update for the ppl who have helped me the past few days on here
I've managed to work out how to use oscam/cccam and connect locally and now have managed to connect using my dns-noip using my vm superhub :-) and just installed the noip updater on the Ubuntu CS server :-) actually figured out the entitlements etc N: line C: line and F: lines :-)

My next quest is to learn how to oscam update card :-)

So I'll be back again lol

Thanks again guys for pointing me in the rite directions and I'm sure there is still loads more to learn n I can start helping ppl out too

Hi, thanks for the reply i never had any entitlemnts cause i never had the card in at the time of PRNT SCRN i have read the basics of adding a C: F: line the only thing that connect to my oscam page is this line >> N: 127.0.0.1 10000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 i understand that this line connects cccam-oscam and then i add users in cccam but how? in what context?

SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : admin
WEBINFO PASSWORD :
TELNETINFO USERNAME : admin
TELNETINFO PASSWORD :
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
#OSD USERNAME : admin
#OSD PASSWORD :
OSD PORT : 80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
DISABLE EMM : no
EXTRA EMM LEVEL : no
MINI OSD : yes
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#MINIMUM DOWNHOPS: 1
#LOG WARNINGS : /tmp/warnings.txt

N: 127.0.0.1 10000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256<<<this shows in oscam
F: my.no-ip-addy.no-ip.biz 12000 test test<<<<this goes in my box but it never connects
#or
F: test test

rite guys i have started from scratch and used the CCcam Oscam.zip to install server all gone good, i have instaled the omnikey 3121 driver edited the opensc.conf and followed the steps to never ending log all good, i have also got the files from above and copy pasted the settings to my oscam.conf-server.user and also CCcam.config rebooted system

gone to the WEBIF's and have a connection of a user but? not sure how or why? and i have a user setup of my own but cant connect to my box?

http://i281.photobucket.com/al…rner7478/Screenshot-2.png

http://i281.photobucket.com/al…rner7478/Screenshot-1.png

http://i281.photobucket.com/al…turner7478/Screenshot.png

hi, i did the auto install oscam/cccam youknowwho? when i connected to my box i choose cccam protocol, i also have the 192.168>>>>>:16001 page to but all my connections DID pop up in oscam until i changed router, is it because of the ip change from 192.168.0.6 to 192.168.0.107 << thats what im on now
[reader]
label = omnikey
description = omnikey
enable = 1
protocol = pcsc
device = 0
device_out_endpoint = 0x 0
key =
password =
pincode = none
readnano =
services =
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
showcls = 10
fallback = 0
cacheex = 0
logport = 0
caid = 0963

hi, am back again :) i was able to connect using my ip (public) 77.198.163.78 for eg only <<
was using my virgin superhub at the time of setting this up and connected perfectly :S
but now i have plugged in the dlink dir615 (ddwrt) put my NO-IP addy in updated fine with my new ip so i made a new user to test this

[account]
user = 1111
pwd = 1111
group = 1,2
hostname = ************no-ip.biz
au = 1
caid = 0963
cccmaxhops = 0
cccreshare = 0

also i made one to connect like before with just my ip but that also does not connect either? i have forwarded the correct port 13000 in the router gui and here is my oscam.conf

[global]
logfile = stdout
nice = -1
preferlocalcards = 1
saveinithistory = 1

[monitor]
hideclient_to = 15
appendchaninfo = 0

[cccam]
port = 13000
version = 2.1.3
nodeid = 6C9C71C810F31578

[webif]
httpport = ***********
httpuser = *************
httppwd = ************
httpallowed = 192.168.0.1-192.168.0.254
httpdyndns = ~~~~~~~~.no-ip.biz

is there any reason why i cant connect? i did notice before that the updater for dns addy in the router itself threw up a error code but refreshed the router thinking itll stay but went but not had the issue in there

Defo 32 bit, maybe its cause I used the install script? if that's it I could just start over and compile a manual setup :-s being brave now lol, but best way to learn ;-)

Cheers for that :-)
I've been playing around with the oscam and wanted to update it from 1.0 unstable 53-- I've DL the newest version stopped oscam renamed it to oscam-old and FTP the new one in there named it exactly as the other one was (oscam) chmod 755 rebooted laptop but can't even start it in terminal nor get to the webif :-s any ideas? So just renamed the old one and started it in terminal all fine

Hi mrgmx, it all finally clicked today i was puzzled beyond any shaddow of dout, then like i said i put it together from what i have read here and many other google directions, but yes i will certainly will be here to help others once i have mastered it :) ,i used to be big into modems and cable boxes, iv always used the name turner123 so maybe alot of ppl from that sceene whom i know got into this one will no dout remember me :) the other scene i started from nothing just a dbox2 and progressed from there and eventually became a mod on a couple of forums, just simply by helping others what i had learnt,

so yes i most certainly will be around as this is my new found hobby (cough cough) addiction pmsl

a quick question can i use a multiroom card ie the second box in the house? in my reader and keep the 1st box running on orig setup?

rite guys quick update, after 2 weeks starting from scratch, ie ubuntu, oscam,cccam i have managed to finally get my box connected :) via my ip addy, next step is to set up my router dlink with ddwrt on, 1 question is no-ip dns ok for this? (as its free) :) i have one setup n ready 1st thing i did :)

well i really do have to thank ppl for there reply to my thread i read i over i good few times to get to grips and finally i feel i have achieved something in just even getting my box connected :)

cheers guys and ill get be very soon when i get stuck more lol

mrgmx, that's the best piece of info I have gathered so far and has cleared loads up, thank you.

Oscam version is 1.0 stable 57-- I think/along them lines

I was advised by someone omnikey was best option so followed that advice, all I'm after sharing is sly uk with 2 other boxes in my home and maybe close family who only live 5 doors away from me, I will post back later tonight on my new info

Again thank you for the great reply :thumbsup:

Hi guys, 1st thing 1st I have read loads about setting a server up and over 2 weeks have managed to get to grips with Ubuntu and oscam/cccam :-) all I'm after is help with a few simple questions

1 oscam.conf oscam.user oscam.server how do I edit these files correctly? Use terminal ie nano /usr/local/etc or text editer in Ubuntu? Or the WEBIF?

2 I used the script from here to install oscam/cccam auto install what's better this, or use oscam on its own?

3 I have a omnikey 3121 and have tried to follow the guide I was directed to but can't seem to find the lines I need to un hash and delete :-s

4 is it possible for someone post there working conf server (omnikey) user and cccam files just to help me figure out if the ones installed automatically are working

I will thank you in advance for any knowledge share

Hi im trying to install the omnikey 3121, i have done the above code etc but i am totally puzzeld as to what to un hash and delete? anyone point me :) to exactly what i need to do