Posts by TH3-J0K3R

lolz kk easy to sort that ma end ;) ill be back in a jiffy ;)

get yer Wetek ready with clean install to sd or nand what eva yah using im on nand but sd will also be sound to take the back up ;)

- - - Updated - - -

pm sent

plus 10 characters

what location are yah in jockland as im eastcoast in kinda 95% sorted just to get groups in order i prefer as in ent,movies, sports all chans are in ored within groups but groups themselfs are in a-z order rather than as i prefer , i could just do a full back up oh OpenElec and yah restore that , i would just need to change my oscam deets to changeMe in yah stick yer deets in place

Quote from snifferdsx

there is a new night build Lakka-WeTek_Play.arm-devel-20150521064357-r21011-g27c01a6

you can find it here http://sources.lakka.tv/nightly/WeTek_Play.arm/

thanx for heads up ;)
am i right in assuming this file is whats required to install onto SD-Card
Lakka-WeTek_Play.arm-devel-20150521064357-r21011-g27c01a6.img.gz

and just to follow the same tutorial on how to install xbmv/linux/openelec onto sd-card for wetek-play

also i plan on using a 2/4 gig Sd-Card and hopefully a Exstenal HD or large USB-Drive for roms as i see that Nas is not a option for storing Roms
seaminly i seen on a forum , but im sure where theres a will theres a way ;)

sweet how yah still camped up on TVHeadend as PVR , it any quicker kicking in first boot yet ? on this ver oh Kodi :)

Quote from signman

to update an old openelec on sd card with new version

download correct linux tar file from openelec web site

copy this to sd cards update folder while still in wetek using ftp

Then reboot.. this will update version on restart keeping old settings

Display More

not from 5.0.8 to beta6(5.9.1) yah dontas all settings have to be redone as magor changes in system

WeTek if for internal Openelec installed on nand with VDR as PVR-LIVE-TV see adds at top of site ;)

Quote from snifferdsx

strange did you format full you sdcard
sometime that will help

just followd a tut on here to install openelec,linux,xbmc to sdcard but used this file Lakka-WeTek_Play.arm-devel-20150512172735-r21002-ga5310d6.img to burn to sd
via win32dsiskimage i used SDformater first offcourse as i still had nand files on it from updating offical to the devel-OE that was posted last week , I will start over as just reinstalled to nand Officail OE 5.9.1 , and check back if i am using wrong file to build a SDcard install as ma 2ndbooot device , but for now im away tp dig out a few roms from my PS3 and a controller whats easiest to config to wetek , i have a old windows/linux ps2 to usb adaptor there PS3,XB360 Wii and few others .

Many thanx in Advance

H

So i got round to installing a img file to a 2gig Sd , i was running OpenElec in nand
stuck in the sd booted to lakka did say soming about resizing storage blah blah reboot 15seconds
boot back into lakka , did not have a controller to hand but remote did nothing bar up down left and right no ok , back ect ect
so i powerd down and removed SdCard
powerd back up and i now have the following error message

attached a jepg of writing , now i take it i have just either corupted the Oe install or just wrote over it lolz the joys ,
am i able to have Oe in nand and Lakka on Sd multi boot or have i just epic failed :)

VDR out the box works best for me tbh , still no sorted a chan list out yet for VDR, can do it manually via remote in settings i know just no really had the time to do it or test the online convertor yet, prob wont now that lakka been ported to wetek and play aff SD card thanks to sniffer i fond myself hunting out all myroms ;)

Quote from canthackit

Hi

over the weeks any many many reinstalls, i've got openelec 5.95.5 up and running, feeling really pleased after all this time i've only just found out how to bring up the bouquets after spending weeks scrolling thro the channel list lol.

anyway as far as i can tell that everything is installed and configged correctly, i have tvheadend enabled as well as tvheadend HSCP also got oscam working although not sure about the setting in oscam.config is it PC? and the version OSCam pc-nodmx (rev >= 9756)?

so now all i'm getting is that really annoying buffering % in the top right corner and i can't clear a thing even FTA.

what's the workaround on this please? i hope there is one and it's easy lol

regards: canthackit

- - - Updated - - -

Hmmmm is there no one that knows the cause of contant buffering on satellite?

i see a tut yesterday that suggested going to programs>maintenance tools>system tweaks>zero cache..... did that and thats made no difference.

still i wait for a solution.

regards: canthackit

FURTHER UPDATE

i'm just going over my settings in HTS tvheadend and i notice that there is only one tuner listed under STATUS and that is showing SNR and Signal Strength as 0%

so i think it something to do with the tuner not setup correctly and/or not being recognised.

Display More

Double check what feed is connected if only one feed in wetek (sat cable aye)
if only one swapit over , if two then got to TVheadend web page in make sure the tunners are activated and set on right sat
also make sure VDR is disabled , i prefer VDR myself but do mind there was tunner reset via webif tvheadend after a update that would be required

hopeit helps in post results :)

Quote from snifferdsx

this one is normal not for nand, the last 2 is for nand

whats the best for nand was the rar file i extracted and chucked the files over all 4 oh em just to be sure ;)

still says unofficial though :)

ive not tryed it yet but yeah remote access on wetek

Quote from ozkaradag

OpenELEC-WeTek_Play.arm-6.0-devel-20150517144357-r20893-g12f423e.rar.
Is this?

Sincerelly...

yeah thats it did install on the nand though

Quote from ozkaradag

Thanks mate,

NAND version, please.

Sincerelly...

ive used this to update my nand OpenElec via samba ,rebooted it updates and reboots again
now says unifishial OE davos or somin @ top oh splash screen ;)

Quote from snifferdsx

mmh if had look in the tutorials then you had see this one howto: update - downgrade openelec

you know most of the tutorials from openelec works on all platforms include Wetek play

many thanx sometyms yah cant see woods for trees was the folder structure i have in wrong place afetr a quick change of files ored sorted

Quote from canthackit

sorry mate.

in my opinion it's so much easier and quicker the way i said, it installs and boots the box automaticly.

regards: canthackit

yeah it does that i still cant get the right location on winscp but samba works ok :)

Quote from pauldb

ill give it go again, didnt work first time i did it last week

di anything come on screen when it was flashing or a time scale to wait?

i just noticed after first run i did not have the correct DEVICE MODE in top right and after run by admin hrs later it was indeed there ,
whole process toook say about 5-10 mins , i did delete all options in box middle right then restart prog and add recover file again

Quote from pauldb

@Honcho was it post 13 you followed or the other one before it

"USB Image Tool" and "WeTek Play rescue" post 13 links to wetek site by christian :) i posted on there anah @ bottom lots of edits hahahha

Anyone have any joy with this yet, just installed OpenElec 5.9.1 into nand still scanning the now so just seen if i actualily need to scan or use this and fire over file ?

Quote from canthackit

bloody hell

i've just found out how to do it via file transfer and done it by that manner, now the .img comes out lol.

regards: canthackit

What file location you using to do update via WINscp , i just installed 5.0.5 into nand on 1 of my weteks as bricked it anyrd so may aswell i thought lol,

many thanx in advance not did it this way yet so may aswell eh :)

also go here http://linuxsat-support.com/showthread.php?t=83352&p=271532#post271532

and dale posted a link think post 14 i had same problem but had not ran the tool as admin , i redid with admin rights and back in play