Posts by TH3-J0K3R

Quote from mr.cit

I had a similar problem when i wrote mSD image to NAND memory. WeTek support gave me this https://mega.co.nz/#fm/UYxBXaLK
there is a tutorial inside and you don't need to open the box and connect pins, just follow all other instructions.

still need to send commands via putty aswell yeah , just killed one of my wetek oops , just black screen regardless of what i do :(

UPDATE all i get in putty is error network refused conection any ideas

- - - Updated - - -

Quote from dale094

try this Honcho, http://linuxsat-support.com/attachment.php?attachmentid=33728&d=1431865882

* Power off your device and unplug the AC power cord.
* Download the recovery zip (below you will find the up to date version).
* Unzip the downloaded zip (you can delete the META-INF folder).
* Copy the downloaded zip and the freshly unzipped recovery.img to a MicroSD card.
* Now insert the MicroSD card in your STB.
* Plug the AC power cord while you keep pressed the little reset pinhole (located on the bottom of the device) for 10 seconds (just count slowly to ten and it will be good).
* The device should have booted to CWM recovery.

Display More

hAVE DONE ABOVE AND TO NO AVAIL , still dead :(

Quote from mr.cit

sorry for the link
I hope this works https://mega.co.nz/#!5JhkAbBB!…pGWgy06OzpvfvpYHnKRew8C50

tHANX GOT LONK VIA RIGHTCLICK COPY LOCATION , THEN GET RID OF REDIERCT in browser after i pasted in , must be the redirct thats sending to homepage of mega :)

- - - Updated - - -

Quote from mr.cit

I had a similar problem when i wrote mSD image to NAND memory. WeTek support gave me this https://mega.co.nz/#fm/UYxBXaLK
there is a tutorial inside and you don't need to open the box and connect pins, just follow all other instructions.

still need to send commands via putty aswell yeah , just killed one of my wetek doing nand upgrade oops

use the openelec installer yah will find it on here in apps im sure ;)

there is configs posted for all cards in oscam section have a look in there , just look for what box you and what u wanna use to update myself its a VU with Oscam to mgacam i use :)

got this error after a while of usage and its very unresponcive

2015/05/15 14:47:55 77709C68 c (dvbapi) ERROR: Your vuduo box contains a serious dvb driverbug for pid handling, please ask the manufacturer to fix it!

Any Ideas ?

posted last week m8 its the same as officail openelec post mentiond before ;)

Quote from dale094

could you give me a link to 5.9.1 img thanks.

its been posted in the open elect section official openelec is the thread ;)

this for the Official OpenElec to update the Kodi kodi-15.1-Isengard thats preinstalled ?

how did you put chans into wetek via ftp yeah ? open the list in a txt editor on mac in see if listings are in same order as in wetek , i know that the e2 convertor does not keep them in order inside the faves but alas never tryed to just ftp them over as never got round to it as im still lookin into another problem i have

yup was typo 1.1 is the second version thats been releases 1.0 was first :)

just download named picons ;) you will find two types of picons in the picon download area reference and named :)

check out VDR instead of TvHeadend , as for channel files there is a E2 to tvheadend convertor im sure i have a online E2 to VDR convertor
i dont get much buffering on either TvHeadend or VDR but have found on TvHeadend it takes twice as long to kick in compaired to VDR on first boot but also scrambled channels can happen in you have to channel up and channel down to sort , yH Cn config both TvHeadend and VDR via remote control as well

you grab the 1.2 version yeah ?

Quote from enam12

can i have a copy of your channel list

theres a E2 to Tvheadend convertor posted on forum id Dale dont share his list ;) this will convert and copy say rats E2 latest file and send to Wetek , however it does put the faverites in diff order and you set plavement via Tvheadend web interface and the channels within favs are somewhat messses up but it will get yah started im sure yah can edit channel location within the favs themselfs but alas ive not did it yet as been busy , and much prefer VDR to TvHeadend

Quote from dale094

any help appreciated, installed ostool, filled in everything, the only time it starts is if i go to webinterface/readers/click on reload readers, then it starts. thnaks guy's

from post 14 yeah ? if so make sure run from reboot is ticked from runing within wetek

Here is web with script who is convert channel list from E2 to VDR :

twojeip.net/e2/vdr

Channel list from E2 must be packed to zip file. All files must be in standard lamedb 4 and to root directory.
Script display log from conversion, at the end you get ready to download channels.conf

Author : DaM

found on other site here

http://openelec.tv/forum/83-dvb-s-s2-support/76470-online-converter-channel-list-from-e2-to-vdr

may come in handy as VDR is my prefferd Pvr tbh, ive not tested this yet as not at location where im able to but thought i would share for everyone else

Quote from dale094

pheonix, you just answered your own question, yes most user's don't have a clue but that's not to say peeps like master G are causing problems, on the contrary, master G has always been good for his backups to help other peeps, isn't that what forums are for, perhaps a little input instead of being contraversial might help.

I would think that Pheonix is sujesting that it would be better for the scene if the vast magority of users knew how to build there own images or remove and add there own plugins ect ect via the tutorials onboard the forum, nether the less if you go look at Pheonix's post you will see there has been alot of input from said user :)

thanx for info , i had not noticed interference until brummie had pointed out but i had not had them both on at same time :)

Recalibrate Tutorial HERE

Quote from canthackit

sorry scooter for jumping on your thread, but i thought we both might be able to sort out our problems.

also when on andriod wetheater.

more than 2 pushes on the right or left cursor sends the box into a frenzy of erratic scrolling through channels.

can this be sorted as well?

regards: canthackit

Display More

hit it once in its all good , twice to right in yah gota 1left twice to left in 1 right , sorted :)
but in all seriousness this happens alot but its not as much a concern as the remote interference when both WeTek are runnning same time , tested this and i can comfirm this happening here over 2 rooms distance :)

Quote from splat01

Yes servers are up my sons on same one ..... I'm used to openvix , a little easier for me to set up lol.... Just doing a service scan see if that works .

- - - Updated - - -

Still not getting my sly channels ......help!!!

piut latest E2 file or rin the E" auro chan file app from plug ins and reboot :)

channells preloaded are not current and will need changed as per evry time feg chabges take place
for more info on what im typing about check forum for channel lists RAT ok for most also dreambox edit to send files over to VU and reboot job done :)