thanks
tested and works well on afn 9east
everyone can't open it check softcam.key
thanks
tested and works well on afn 9east
everyone can't open it check softcam.key
i talked with one of the oscam developers
they knew the problem and wish they fix it during weekend
wait for the newer news
greeting amirali.sh
may i have to transfer unstable factory image to usb device before insert to dm900.
no
first you should install BA
after that copy other images to /media/usb/backup or if you have HDD to /media/hdd/backup
then you can install all other images from Ba menu (from extensions)
also from this link
(http://www.dreamboxupdate.com
i downloaded the latest unstable image for DM 900, my box has only one Flash port which is being occupied by the WiFi stick.
so for image installation, do i need to dispatch the image to USB/flash in that particular port( WiFi stick owns that), and whats would be the next proceedings....
many thanks Sir
if your box is DM-900 you have 2 USB port .
one is in the back and the other one in the front door.
1- install latset unstable factory image (Dreamboxupdate.com)
2-format usb device to fat32 with pc
3-insert usb flash to dm900
4-copy barry allen to /tmp
5-install it.
if your box is original you can use all the images from OE2 & OE2.5
but you should install latest unstable original image on your device flash
after that insert a SD-Card (fat 32 formatted before) to your device
then install BA as a plugin to your box (post #2)
after installing BA you can see ba on extensions menu .
all clear in its menu
can you explain what is meant by BA...i didnt understand this BA term..
how BA helps in image imstallation
it's multiboot plugin
Barry Allen (BA) .
if you have one original image on your device flash then you can install multiboot images on SD Card with BA without Cable.
f
I have also DM 900 , by the way i connected my box using WiFi... cause i have no availability of Line/wired network. Thats why on receovery mode DM failed to show any IP for image installation.
can anyone help me how i can install a new image to my DM box.
please guide me to install new image...also guide me the best possible image for DM 900.
at moment i am using open atv 6.2...
many thanks
there is no way to setup an image over wifi
you should use cable (lan) for this reason
but if you have BA then you can install all OTHER imges with remote control
but the first one (Flash Image) needs cable
best images OE2.5 : merlin+gp3 or Cvs+gps
best images OE2.0 : Opernatv or Openpli6.2
greetings
Display MoreHi guys , i run experimental image on dm900. I installed BA 12.51 but after all i cant get sound from any image from receiver.
I tried to close hdmi cec or change the speakers but no solution.
**on BA i have 6 images too..
Do you suggest anything ?
dear gestapo always use latest BA because they have driver changes,,
and also latest Unstable CVS
hi
you should have latest Unstable factory image on flash (http://www.dreamboxupdate.com)
and then install BA
latest BA is 12.71
as you see on the attached picture there is Two Input On OE-2.5 For FBC's
Its Bcm45208(without MS & S2x)
then you can use it without problem.
bcm45308 has MS&S2x and works well with Oe2.5
but how can I use this LNB2 in green circle? I think LNB2 is real.
i say a3 to a8 is virtual ...
i know its real
please try OE2.5 then you can use both A1 & A2
find problem
all signal at A2 to A8 through A1, why?
because its virtual and there is no A3 to A8 physically
in OE2.5 you have 8 tuner but internally
amirali.sh Thinks reply.
I try in OE2.5 and openATV 6.2
in OE 2.5 only display A1 & A2 ,but when you scan channle,no mulitsteam option.
in openATV 6.2 display A1 to A8 ,but only A1 have signal.
there is no option for multistream in settings
only some freqencies have MS. then you can try on that freq .
on 12.5W (12718 H 36510)
hi
which image are you using ericzhu
i think you are using OE-2.0 because of seeing A1 to A8
in OE2.5 Images There is only 2 tuner Settings A1 & A2
try Oe-2.5 images like merlin or Cvs
Display MoreHi some one have idea why is not working
openpli6
vu solo4k
/sur/bin the CCcam232 bin in with 755
the CCcam.cfg on etc
maybe the CCCcam script because i didt saw it !
any suggetion are welkom
thanks
try the attached version.
from vu+team & levi45
which box ?
try different images first
ithink on 520 it's hardware limit
but in vu+ is software missing section for FBC tuners .(driver)
older vu+ tuner can do it (without fbc)
No, There is no way to do this
Hi -We Have Daily Update On Panel Now
For Skins -Emu's-Panels & Plugins