Yes of course :)
when using BAXII (barry allen) you should use latest icvs(dreamboxupdate.com) on flash
because BA Developed and Upgraded with latest cvs versions (unstable)
Yes of course :)
when using BAXII (barry allen) you should use latest icvs(dreamboxupdate.com) on flash
because BA Developed and Upgraded with latest cvs versions (unstable)
hi
It Seems FBC Yet and I think The Problem Persists on UNO4KSE
but the new zero4k with dvbs2x may be OK
no problems with 12.64
try these
and make sure your FLASH image is Unstable
dm900 can do blind very nice with all of the tuners
blind on Dm900 with triple tuner S2X is very fast like light
the problem is FBC
all the boxes iknow with fbc tuners cant blindscan
and some other boxes like 52X because of the tuner type
Panel Updated 12/17/2017
Gp3 Wizard 2.4 (DM900-DM920-DM820-DM7080-DM52X)
Latest versions of Gutemine Plugins
1-barry allen 12.62
2-adrenaline
3-dbackup
4-autodimm
Latest Oscam11392 For Various Images Mips And Arms
Latest Ncam 3.7 For Various Images
Dreamy FHD-Skin V2 By Vahid_Tweak
for working ncam or oscam you should buy an account .(called cccam account in general)
google is your friend in this situations becasue its illegal on many sites
if you don't have an account for it , it's only working with bisskeys or powervu
imean with ncam and only softcams you can watch some channels
the binary file (like windows Exe) is in /usr/bin
but the configuration you made is /etc/tuxbox/config
put your account details in below lines and make a file named (ncam.server)
and so on for other lines like server2 ,3 ,4 ...n
your details should have (host-port-user-pass)
[reader]
label = server1
enable = 1
protocol = cccam
device = host,port
user = user
password = pass
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
download it and make the changes
store in /etc/tuxbox/config
New Skin Added
Dreamy- Edited By: Vahid_Tweak
Only For DM-900-- Tested On Cvs&Merlin
And please Install on Fresh Image
just tried this
& it is the same issue?
you cannot switch from a PowerVU channel back to view either a local card or any proxy server line without rebooting the receiver?
in newer boxes like 52X&900 You cant switch to other channels working with same emu
but the old boxes working perfectly
and its happen only on PowerVU channels
restart required
use this line on your Ncam.server and try it
disablecrccws_only_for= 1811:003311,003315
like this on every Cline you have
[reader]
label=******
enable=1
protocol=cccam
device=h********id,36000
user=y***n
password=******
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
disablecrccws_only_for= 1811:003311,003315
hi again
dear fmoreira you cant use dbackup in ATV because its debian package and didnt recognize by ATV
and i think there is no dbackup for OE2.0 nowadays
its better to use with internal (backup and restore) under the menu ( if ihave not make a mistake its there)
other steps are correct as you said
panel Update !
1- Nuke.Fhd Skin For Merlin
2- Ncam2.7 Moded By Raed (All) for mips and Arm Based OE2.5's (Tested on DE6)
openatv is one of the best e2 images
but its not suitable for BA as you know
if you want to install ATV you should extract atv and the installing (ROOTFS) folder vi BA menu
if you wanna create a backup you can use enigma2-plugin-extensions-Dbackup_armhf.deb to backup the whole of the image
Display MoreThanks cyberworld23 and master G for your help!!! My box is alive again
I try again:
wget http://dreamboxupdate.com/opendreambox/2.5/stable/images/dm900/zImage-rescue-3.14-r0-dm900-20171017.bin
flash-rescue zImage-rescue-3.14-r0-dm900-20171017.bin
after boot in the image and not in rescue menu. It update and after that i was able to install a new image from the rescue menu.... the only thing i did different was flash a newenigma image (before i try DreamElite, openAtv and dreambox official)
Just another question:
- Can i install in flash a backup from BarryAllen? Or was that the mistake I made?
hi
you should not install BA on Dreamelite and The Others like newnigma
the best way is installing (unstable dmm originial) on flash and after that try installing the other images via BA
i will say again (Unstabel on DM Flash) like Cvs-oozoon
The Plugin Attached To post #1
Thanks all
Specially Master G. For the Helps
And Mr Audi06_19 For Some Sources
Unpack the .deb.
FTP DreamOSatDownloader folder to /usr/lib/enigma2/python/Plugins/Extensions/DreamOSatDownloader
Delete plugin.pyo and replace with plugin.py
After rebooting receiver it will compile in the correct python version.
I got the plugin to start without error, but it looks like it needs some extra work done to it.
Thanks To Master.G And God Saves You For All of The Enigma world
All The Things Done WIth This Little Trick
last iwas Try to Compile On Different Python Versions.
Thanks Again
after compiling and installing the (magic number) error appears on plugins Menu
Bad magic number error is usually a mismatch in python versions.
When compiling on your receiver remove the old .pyo file then reboot. After a reboot it should have compiled the plugin for your python version.
Attach the plugin so we can have a look at it.
thanks Master G for your feedback and god bless you
here is the original plugins in debian format
i unpacked and trying to change the server address ( easiest way for me because im not pro)
but as you said somethings wrong with python version or else
i have two server one is ftp and the other is Http
making sitemap.xml for replacing with the original Dreamosat Xml(sitemap) for reading my database from server
im on ubuntu 16 and the device is 900