Posts by hecha71

Quote from indinana

I have disconnected the front display. It is now OK. But problem remote not working. I think that said IC became faulty.

in general, what I did was solder the 10-pin U1 Vcc, turn off the power from the ET6226M chip - the display, the LED and the button on the front panel do not work, but the receiver is controlled from the remote control

here is a typical circuit for turning on this microcircuit, and with the arrow I indicated which leg of the microcircuit I had unsoldered from the board, removed the power from the microcircuit

Good luck friends, don't be afraid, everything is in your hands!

Quote from satfreund

The manufactorer still exist !

this is not an argument, there are many manufacturers that still exist but there is no technical support.Your argument is like pointing a finger at the sky

Quote from satfreund

the Gigablue Quad 4k Pro.

You amused me with your opinion, got acquainted with the technical specifications of GigaBlue UHD Quad 4K Pro and dm 920, what is the difference?! - these are the same receivers in terms of the processor used, RAM and flash memory, so what are the advantages of GigaBlue UHD over DM 920????

and what Giga Blue did was release a receiver developed ten years ago with a Pro prefix

Dreambox two has already been recommended, but not GigaBlue

Quote from SANCIOGOL

Good morning, I own an OCTAGON 8008 decoder, and I'd like to upgrade to a Dream Box 920

The dreambox feature is the dream OS axis.

And don't ask the forum members, you won't know the truth until you try the right receiver model yourself, because there are a lot of users and opinions here.

Quote from hecha71

dm920 - Python 3.13.6 - openpli-develop-whinlatter - homebuild image ! 20250807

online upgrade

- enigma2: [ServiceName.py] add missing sanity tests (#4252)
- curl: 8.14.1 -> 8.15.0
- openssl: 3.5.1 -> 3.5.2
- gstreamer: 1.26.4 -> 1.26.5

or installing a new build

dm920 - Python 3.13.6 - openpli-develop-whinlatter - homebuild image ! 20250807

- Python 3.13.6, Glibc 2.42, GCC 15.1.0, OpenSSL 3.5.1

- ServiceApp, FFmpeg 7.1.1, GStreamer 1.26.4

- Ciplus, OScam, OpenWebif, EPG-Import

- Blindscan, Cablescan, Fastscan

- Feed dm920/drivers/settings/picons/skins/plugins

update:

- enigma2-20250806:

--- Canvas - sanity fix – cast draw parameters to int (Python 3 stricter than Py2)

--- [opkg] prevent updated dependencies from being installed in an added destination

--- Revert "Remove option installing picons to an alternative location"

--- Revert "PluginBrowser.py: Fix broken plugin install"

- Glibc 2.41 to Glibc 2.42

- Python 3.13.5 to Python 3.13.6

openpli-develop-dm920-20250807.zip

Quote from nillsat

what is the procedure and installation order of the different plug-ins for the use of UPTV enigma2 and necessary tools ?

brother, it all depends on the image you use in the receiver.there is little information from you, but here on the forum there are enough plug-ins for watching iptv that work fine on the dm900

Quote from Warder

A new display costs approximately +- 30€

this is also an option to buy a display module and replace it, but for those who are not friends with a soldering iron.. my solution is for those users who can repair the receiver themselves. the repair cost me 0 €, except that I spent several hours of my personal time searching for the problem and how to solve it correctly, and it's not a burden to me. I like my hobby.

Quote from airforce

The ET6226M IC on the front panel is faulty.

I will add to your answer that replacing one chip does not solve the problem, or it solves for a while, and then everything repeats again, the ET6226M chip is paired with the display and they need to be changed in pairs.I have repeatedly tested on the Octagon 8008, as well as on the Ustym 4k pro.I soldered these parts from the donor, they fit from T2 BBK, I don't remember the model name, as well as from other consoles.The ET6226M chip has many analogues-ET6226= FD650S = FD650B-S=HW650EO =HD2015E

after replacing the chip and display, my 8008 is working properly, the only thing the display now has is not a pale blue glow, but a light yellow one..

Good luck!!!

Quote from Satmeter

Do you know the tuner limitation I mentioned above? Is it fixable in such way? Thanks.

Image for test FBC tuners

dm920 - Python 3.13.5 - openpli-develop-whinlatter - homebuild image ! 20250727

https://www.mediafire.com/file/vthuy2vbtwo60w7/openpli-develop-dm920-20250727.zip/file

Quote from Myshel

Post a list of these developers and the software he copied from them.

This is not how the user put it.. let me explain, the plugin is created in a test form, experienced users test, make suggestions, make edits, everything in the plugin is brought to a good state, as a result, it starts whining, installing imaginary copyrights, etc. it whines like a beaten dog when other competent programmers see shoals in its work, and this is shit - gutamine it starts to whine, turning off the supply..Even if he's literate, but as a person, he's a rare piece of shit..

I always wrote to him about it in his topics both on boxpirates and on the forum. dreambox.de

Quote from miau18

sometimes barry allen he has problems and we lost all images!!it already happened to me!

RE: Barry Allen DreamOS (mips + arm)

Quote from miau18

can we please have this great image to dream 900!!thanks

brother, no one will collect an image for 900, just learn how to use a Barry allen multiload, and thenit wont matter which model the image is from 900 or 920, you install and use it..Good luck!!!

Quote from satinfo

What you’re writing is complete nonsense.
Blaming someone else because you are not respecting licenses
If you don’t respect licenses and simply ignore them, you shouldn’t be surprised that everyone is complaining about openATV

What kind of licenses are you talking about? about Gutamin's whining?! so a huge number of users don't give a damn about it. also, despite his claims, if he wants to make sure that his work is not used by other programmers, he will encrypt his files in so.The rest of what you write is just butt-licking gutamin

Quote from Satmeter

I like the Openpli 9.1, just tested in my Vu+ receiver

this build from satpong and PL 9.1 are different images, but I can say with confidence that this image for the 920 is much more radiant than pl 9.1,

Quote from Fryderyk65

file does not exist please retry link updates to file thank you very much.

everything exists there. You tried the link on the 12th and you need it on the 20th.. Please be careful...

dm920 - Python 3.13.5 - openpli-develop-whinlatter - homebuild image ! 20250720

- Python 3.13.5, Glibc 2.41, GCC 15.1.0, OpenSSL 3.5.1
- ServiceApp, FFmpeg 7.1.1, GStreamer 1.26.4
- Ciplus, OScam, OpenWebif, EPG-Import
- Blindscan, Cablescan, Fastscan
- Feed dm920/drivers/settings/picons/skins/plugins

https://www.mediafire.com/file/c7ehhdwjq7ulkce/openpli-develop-dm920-20250720.zip/file

Quote from imsel

it is not work on barry allen unfortunatelly.

I'm already tired of talking about the same mistakes when installing images in Barry allen to users. Learn how to use Barry allen correctly and there will be no problems, I would advise that users to read more about Barry Allen. watch the skinshots. Why do I have this image and others don't?!!!!

Extract the image from the zip archive, it should be as in the first screenshot, then place it in the backup folder using this path /media/hdd/backup -the second screenshot. Next, I install the image and the 3rd screenshot shows that the image is successfully installed

In the 4th screenshot, you can see that the image in the barry allen menu was entered by me. I click ok and go to it, after restarting it, it loaded, went through the initial settings, and here are the 5 screenshots. Good luck!!!!

Quote from abu baniaz

Can anyone guide/advise if it is possible to use a triple tuner (from a dm800 hd se) on a genuine DM 900 ultra HD.

so there are no drivers , and there is no visibility of the tuner .. take the ipk package, unpack and redo the binaries for 900 ,

opendroid.-8.0_900/920

 https://opendroid.org/8.0/Dreambox/

dm920 - Python 3.13.5 - openpli-develop-whinlatter - homebuild image ! 20250712

- Python 3.13.5, Glibc 2.41, GCC 15.1.0, OpenSSL 3.5.1
- ServiceApp, FFmpeg 7.1.1, GStreamer 1.26.3
- Ciplus, OScam, OpenWebif, EPG-Import
- Blindscan, Cablescan, Fastscan
- Feed dm920/drivers/settings/picons/skins/plugins

https://www.mediafire.com/file/uoxxj8370b81aop/openpli-whinlatter-dm920-20250712.zip/file