Vip pid ??? how on telnet ?
On the box it says:TL-WN823 N ( EU) ver 4.0
Install your adapter into your computer or laptop and look at the adapter's vid/pid in the properties..everything is much simpler than it seems..
Posts by hecha71
-
-
Have tp-link WN823 N wifi usb adapter.
What is the vip/PID of your adapter? but judging from the user reviews on another forum, your driver -RTL8192cu or RTL8192eu
-
Look.
What am I supposed to see here? you need to look at the entire list in modules.alias after finding out the vid/pid of your wi fi adapter.
-
I copied the driver from the Blackhole image,
( lib/firmware/ + lib/modules/3.14-1.17-dm920/kernel/drivers/net )
That's where your problem came from, but not with Barry Allen.And then you did the right thing, deleted the image where you messed up, and already in the newly installed one, you did everything correctly..
Well, you know what I'm telling you... that it's all about the "curvature of the hands", just not everyone can recognize their own mistakes.
-
I think the problem is the Barry Allen.
Brother, you amused me with your guesses about Barry Allen.. and the fact that it didn't bring you to the cape from all your manipulations with scattering drivers across image folders? what exactly is it from these actions? And if you look at the initially installed drivers, then the author of the image installed them by default, so you didn't see them in the plug-ins using the green button..I don't have any arrogance towards you, just don't write nonsense and back up your thoughts only with facts.Good luck to you!
-
I'm not stupid.
I searched the feed and couldn't find the driver at all.
If you're not a fool, you should know that to find out if the drivers of your "whistle" match and if they are in this image, you need to look in
/lib/modules/3.14-1.17-dm920/modules.alias
vid/....pid...
-
Here are the decompiled pythons:
everything is fine with the components in py , you can replace them in the ipk installation package and the skin will be universal.
-
dm920 - Python 3.13.3 - openpli-develop-scarthgap-walnascar-whinlatter - homebuild image ! 20250519
Code- Python 3.13.3, Glibc 2.41, GCC 15.1.0, OpenSSL 3.5.0 - ServiceApp, FFmpeg 7.1.1, GStreamer 1.26.1 - Ciplus, OScamstatus, OScam, OScam-emu 11884 - OpenWebif 2.2.1, EPG-Import, File Commander, ... - Blindscan, Cablescan, Fastscan - Feed dm920/drivers/settings/picons/skins/plugins -
you were very kind I'm using OpenPli-12.3-dm920-Original-Backup_piterf
in this backup, the author of the satpong image has already pre-installed this plugin, try to play with the player selection in
for open Pli another : setup-system-ServiceApp
-
Setup ---> Playback, Recording & Time Shift ---> ServiceApp
This path is in the menu for open ATV images ,for open Pli another : setup-system-ServiceApp
-
what version is this can you give me the link to download it thanks
From the install feed, this plugin is available on the feed of any open image, in the system plugins section.
-
support films in H265 only in H264,
Install the system plugin ServiceApp and try using the exteplayer3 player.
-
I tried twice and it took quite a long time to unpack the image.
I didn't have the nerve to unpack it via telnet, mostly on my DM920 it doesn't boot and I'm giving up on further testing.
well, in the previous post I showed you that there are no problems with installation BA after unpacking and renaming the rootfs.tar.bz2 file to BackupBH.11.8_piterfree.tar.bz2
-
Never had to install extras. Worked always Plug and Play :-). Learning on the way
yes, this is a feature of some images, including the open Pli, initially the team compiles the build with a minimum number of plugins and dependencies..you can compare the size of assemblies from different teams, the open Pli is the smallest size, I mean the official image and this build from toysoft
that's why you have to install everything locally.
-
ModuleNotFoundError: No module named 'PIL'
in telnet :
Codeopkg updateCodeopkg install python3-pillowp.s. Dude, I'm amazed at you...you install the plugin without reading the 1st post of the plugin author from the word at ALL
-
Thanks for the image, but this image doesn't work on BarryAllen 12.91.
It doesn't boot
Too bad!
it is not installed because the backup author made a lot of mistakes in the name of his backup. The first is the space between the backup and BH, as well as the name being too long, which bores unnecessary words and signs
-
Thank you very much Hecha71.
in the same way, you can install, for example, the official pli 9.1 or developer.
After pre-downloading the image of openpli-9.1-release-gbquad4k, unpack the archive and take one file as shown in the screenshot, you can also rename it as you like for convenience in the image selection section of the Barry Allen plugin..
yes, actually, you can take the gbquad4k image from the team that does not compile it builds for 900-920 and install it in barry allen..either gemma7 or GI ET-11000, but then you will not have a working display on the front panel of the receiver..
DM920UHD : OpenPLi 9.xStar 20250328 GSt 1.20.5
Sorry
for writing in your topic, people are interested. I'm sharing my little experience with Barry Allen. -
Barry Allen plugin are not working
I can tell you the procedure and both plugins will work adequately on that image..
first, install the Mount Manager plugin from the ribbon,
open the mount manager plugin, when your media appears, click the menu, then click ok and confirm by clicking ok again, and restart the receiver
from the attachment in my previous message, take and replace the grab binary file
you need to edit the fstab file,in the telnet, you need to give the command
Codeinit 4or rather, on the disk where you have Barry Allen, edit it. see screenshot
don't forget to save the changes (marked with the number 2)
in telnet, you need to give a command to create a symlink.
Codeln -s /media/ba/ /baand then give the command to restart the receiver.
Codeinit 6now you have a fully functional image.Good luck!!!
-
No idea why it behaves like that, it only work for one channel (any channel) after reboot.
-
I can't get OpenWebIF working. Has anyone else this working?
Do you have the image installed in the receiver's flash memory or in Barry allen? If it is in flash memory, then replace the bin file from the archive and restart the enigma , the path is /usr/bin this is an open pli problem, they have a crooked binary file.
and if you use barry allen, there are a lot of actions that need to be done so that OpenWebIF is visible in plugins and an error does not pop up...how to do this was written somewhere in the topics 900 or 920..
good luck!
