both new images from firebird, both open TS and black holes, get a crash when configuring the CI+ module
I have no desire to test these images further, I am waiting for global edits.
both new images from firebird, both open TS and black holes, get a crash when configuring the CI+ module
I have no desire to test these images further, I am waiting for global edits.
lol
Take care of your head Hannibal
I use the picture via Barry Allen
You have a dm900 clone?
Judging by the screenshots, you have a 920, and there is no 920 clone in nature.
it's hard for me to tell you something, since I don't have a dm900 clone, I have two dm900 originals.
i will check today after work and let you know (from my remember i try dream-elite 7.1 and same problem)
you can try to use a multi-boot - a patched version of Barry Allen without gutamine dependencies, Let's say I can install any image in my receivers independently for a clone or 920, no matter what, everything works, of course there are exceptions not without this, but still many images work fine
This is my guess about the 900 clone, so I can't say that everything will be fine, just guesses and assumptions. sorry.
openwebinf for DreamOS
Have you tried other os dream images? Peter Pan,GP-4.2, NN2...is the web interface not working on these images as well?
I’m not mention my box is clone version
Contact toysoft for help. He has more experience with 900 clones.
p.s.in my opinion, this is a problem due to the incompatibility of the clone drivers, it is necessary to patch the image exactly for the clone, although I may be wrong. But maybe toysoft will tell you something. good luck!
openwebinfo does not work for you only on the image of Merelin or on any image of dream OS ?
when i go to web browser (safari,firefox,chrome,etc) and put my box ip addresses not opening the webinf
do you have the web interface enabled in your network settings?
открытьwebinf
Чувак, что значит открытая веб-инф не работает, в другой теме я тебе давал скрины, где я установил чистый образ от 2024 02 11 - без проблем все работает.. Чего ты хочешь, я не понял? На картинке все работает
покажите мне хотя бы скрины или фото того, что у вас не работает..
i was install this image and having problems with FTP and Webinf connection.
Telnet works well.
Everything is working, I don't see any problems at all
Because It already happen to mines and it easy to test.
Well, well, let's clear the mines, sapper...
but I'm starting to think RAM is defective
Above in the topic, I wrote the reasons why there may be such a malfunction.According to the log that he provided, it is difficult to say since it is clear that neither the processor nor the memory is determined and there is no connection, that is, there is no request from the central processor to read data from memory .. and it is difficult to judge unequivocally that this flash memory is faulty. There may not be one or more voltages that the processor or flash memory uses.As a result, the login will be empty.And what you are suggesting is to press down the processor or memory, this detachment of components from the board is called -the medicine is reballing to solder off the problematic chip, roll the balls and solder them back. And if it can, suddenly the receiver will start , then it will not be long before the first complete power outage from the mains .The way out is to take voltage measurements, compare them with those screenshots that are on Johnny's forum. Then the circle of troubleshooting will narrow down .But if the owner of the problematic receiver does not have skills in repair, a radio equipment repair service center.
then your box can be recovered by yourself, hopefully
this means that you need to do reballing of the CPU and in no way will it be able to do it on its own and quickly...
if you want to play some more, then here's another topic for you to experiment with OptiFlasher Pro [DMips EDition] For DM520/DM820/DM900/DM920/DM7080
https://www.yassinov.com/forum/forumdisplay.php?fid=69 this is the author's forum, and you can play with your problem there, but I assume that you will not find an answer and a solution - only to the service center.
https://www.domica.biz/index.p…15938.msg175698#msg175698 here's an option for the experience, it's true for a clone, but it doesn't matter, the original can also be restored. The forum is Russian, so use an online translator.
telnet using PuTTY
I am writing to you again...Open your eyes or take off your rose-colored glasses... and go to Johnny's forum here in this topic and look at the correspondence with a user who can be said to have had exactly the same problem.. https://jb8a8f8.com/support/in…900-uhd-only-led-red.785/
If you can still connect via Telnet then try entering the following commands via Telnet:
I really wish to be able to sent some command via telnet using PuTTY,
You both don't understand how this program works. works..it it's one thing to log in via SSH via rs232 and compote, it's quite another when the receiver is running (you can see this in the receiver startup blog, which is not there), and you can work using the Telnet protocol -this is when the receiver receives an IP address
Thanks Team, for your support, just small addition; the box was working fun but after a power cut it got stuck in halfway sartup, and then afte r several attempts it ends up to this status...
From which team was the image installed in your receiver before it crashed?
IS the LCD display still working
No change! unable to get to rescue mode...PuTTY gives the below
judging by what the receiver's startup log shows, take it to the radio equipment repair service center.. recovery will not help you. there can be many reasons, starting with the failure of one or more DC converters or the central processor on the board or memory chip
You can try your luck here at Johnny's, https://jb8a8f8.com/support/index.php and ask him another question, and you can look at the topics there are voltage measurements -Good luck!!!
need images openPLi-Py3-dm920-20231231.tar.gz