Hello dear managers and friends, I had a question about the main feature or advantage oscam emu 11581 support cccam Than oscam emu 11581 Without support cccam What is. Does it affect the quality of stability of open card channels or not? Thank you for answering me.
Posts by 1z1z
-
-
Hi again dear friend i wanted to see if i needed the values 192.168.1.1 Make that as IP Same as modem input nameserver1 In Dream and Image. Does this make the connection to the modem more stable and thus better quality of Internet use? Or not the same two DNS That ISP It is enough to insert the data into the dream and image. Thank you
-
Hello dear managers and friends about setting DNS or nameserver I had a question with Dreamy Image in Dreambox. I wanted to know if the IP address on my modem was 192.168.1.1 and DNS ISP I'm 170.150.150.150 and 170.155.155.155 and Gateway 192.168.1.1 and Subnet mask 255.255.255.0 Now in part name server or DNS What values do I need to import in Image and Dream to get high quality Internet with no problems For example if I nameserver1 Make 192.168.1.1 And nameserver2 Make 170.150.150.150 And nameserver3 Make 170.155.155.155 Whether it's appropriate or not nameserver1 Make 170.150.150.150 and nameserver2 Make 170.155.155.155 To put. I am waiting for your response . Thank you
-
Hi dear managers and friends, please help and help with my question and problem I mentioned above and below. Thank you
Hi i have a problem with dear managers and friends. I'm from the Oscam emu 11572 I use. As you know among the files in the oscam emu file oscam.dvbapi There are restrictions that can be created to open custom channels with the custom coding system. My problem now is that I want to do something for example packages NC+ not get coded by the Negra coding system and just get coded by the Seca system or vice versa. But I didn't do anything. Please help me out how to do this and put a sample line for me to insert into the file oscam.dvbapi Thank you.
For example, the sample lines that I created to limit myself and didn't respond at all were as follows.
I: 0100:000068:32FC 1 "NC+ (Seca) - CANAL+ SPORT HD"
-
Hi i have a problem with dear managers and friends. I'm from the Oscam emu 11572 I use. As you know among the files in the oscam emu file oscam.dvbapi There are restrictions that can be created to open custom channels with the custom coding system. My problem now is that I want to do something for example packages NC+ not get coded by the Negra coding system and just get coded by the Seca system or vice versa. But I didn't do anything. Please help me out how to do this and put a sample line for me to insert into the file oscam.dvbapi Thank you.
For example, the sample lines that I created to limit myself and didn't respond at all were as follows.
I: 0100:000068:32FC 1 "NC+ (Seca) - CANAL+ SPORT HD"
-
Hi, dear friend, you mean that I will change the image completely and no longer use the image open ATV 6.3 or 6.2 and only use the image pur e2 Thanks for giving me more guidance. Now, in your opinion, is the image pur e2 superior to the image open ATV 6.3 or 6.2
-
Hi, dear friends, I'm having a problem in the open multiboot now that I reached the stage where I saw the image file. Just when I want to install it, after a few seconds, I'll be grateful if you can help me.
error:
Your STB doesnt seem suppoorted
-
Hello dear, dear, my problem is still going on. When the window openmultiboot manager opens, the image file does not appear at all if I want to install it, something like the image below that I brought here as an example. . An image file question should be placed zip file in the folder openmultiboot or in the same way nfi file. Please help me to wait for your answer.
-
Hi, my dear friend, I installed the plugin. There is only one problem. When I want to enter the hard drive and install the image, I will send the following message.
One point is that when I check the path with the file zilla, I have the following path /media/hdd /open-multiboot-upload
If this is the case in the above message /media/hdd //open-multiboot-upload
difference : in error double //
, I'm grateful to help you.
-
Hello guys and my dear friends, I have a problem. My problem is that I can do anything I can not manually install the openATV 6.3 image on the dm7020 HD. In fact, when I work with theDreamup or the Mozilla browser,it loads some while uploading, and then it sends a message that can not be uploaded. It's been a few months now that this problem has happened. I can only install versions of the openATV 6.2 image that date back to mid-2018 on my dm7020 HD manual. Finally, my main goal is to install the openATV6.3 image on the dm7020 HD. Thank you for helping me. Thanks.
-
Hello . Dear managers and friends please help me please help me The problem I mentioned above is still and continues . One thing I should point out is that the rest of the emu's work well with each version's, and I only have problems with my version of the emu's oscam emu new versions (except 11505) with my emu's.( Text my problem :Hello dear friends and friends, I have a problem with Oscam-emu. In the new versions of Oscam-emu, the only version of 11505 works without problems, and the rest of the new Oscam-emu and now the newest Oscam-emu11517 with Successive stops. That is, each time a stop is created, and after 3 to 5 seconds, the image and sound of the channel will be fine again, and the problem will be repeated in the same way. I have Dreambox 7020 HD and there is a problem with all the images. The images I tested with, including Open ATV, CVS, Dream Elite, Open PLI and ... .Please help me. Waiting for your response Dear friends. thank you). I know what to expect. I'll be grateful for your answer.
Hello my dear friends and relatives, I reinstated oscam emu 115017 and, given the problem I mentioned above, I took the file oscam.log and put it here. Hope I can help you with this data and information. To solve my problem. I'm waiting for your guidance. I'll ask you to help me again thanks
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Mon May 6 16:24:19 2019
-------------------------------------------------------------------------------
-
Display MoreDisplay More
Hello
I have only this file libcrypto.so.0.9.7
it's possible emu oscam-svn11517-mipsel_OE2.0-webif-oscam-emu-795.zip can running ?
tks for your answer
you should add this one:
Hello dear, unfortunately the file libcrypto.so.0.9.8.zip did not fix the problem
-
Hello dear friend, please give me a file libcrypto.so.0.9.7 to test. I am waiting
-
Hello . Dear managers and friends please help me please help me The problem I mentioned above is still and continues . One thing I should point out is that the rest of the emu's work well with each version's, and I only have problems with my version of the emu's oscam emu new versions (except 11505) with my emu's.( Text my problem :Hello dear friends and friends, I have a problem with Oscam-emu. In the new versions of Oscam-emu, the only version of 11505 works without problems, and the rest of the new Oscam-emu and now the newest Oscam-emu11517 with Successive stops. That is, each time a stop is created, and after 3 to 5 seconds, the image and sound of the channel will be fine again, and the problem will be repeated in the same way. I have Dreambox 7020 HD and there is a problem with all the images. The images I tested with, including Open ATV, CVS, Dream Elite, Open PLI and ... .Please help me. Waiting for your response Dear friends. thank you). I know what to expect. I'll be grateful for your answer.
-
Hello my dear friend, I looked at the path that you said. This libcrypto.so.0.9.8 file exists. Now I need to add this file or not. Truly, one thing is to say that the rest of the emulators, such as Enkam, Rabbits, Amjadik and ... work well with my image and my Dream.
-
Hello dear friends and friends, I have a problem with Oscam-emu. In the new versions of Oscam-emu, the only version of 11505 works without problems, and the rest of the new Oscam-emu and now the newest Oscam-emu11517 with Successive stops. That is, each time a stop is created, and after 3 to 5 seconds, the image and sound of the channel will be fine again, and the problem will be repeated in the same way. I have Dreambox 7020 HD and there is a problem with all the images. The images I tested with, including Open ATV, CVS, Dream Elite, Open PLI and ... .Please help me. Waiting for your response Dear friends. thank you
-
Hello Managers and friends please help me. I want to know the best settings for video enhancement Setup the section on the open ATV image. Thank you for helping me thanks.
Please provide the numerical value of the following options:
1-block noise reduction ?
2-Digital contour removal ?
3- Mosquito noise reduction ?
-
Hello Managers and friends please help me. I want to know the best settings for video enhancement Setup the section on the open ATV image. Thank you for helping me thanks.
Please provide the numerical value of the following options:
1-block noise reduction ?
2-Digital contour removal ?
3- Mosquito noise reduction ?
-
Hello, my dear friends, I have a 7020hd Dreambox. In your opinion, what is the best image and emulator for my Dreamweaver, which works well with a Battalion satellite dish and works well with a high quality cccam account and has many online benefits. Thank you.
-
Hello, my dear friends, I have a 7020hd Dreambox. My image is OpenATV 6.1. My emulator is ncam5.9. But whatever I did, I could not open channels 9e, 4.8e that have the POWERVU coding system. Please help me with what I am able to do. Thankful.
