Posts by 1z1z

  • OSCAM-EMU _CHAT THREAD

    Hello dear managers and friends, a question about the file binary Regarding oscam emu I have . I wanted to see, considering that I have a Dreambox 7020HD and an image on it openpli 7(Home Build) And Oscam emu 11678 Previously from the section Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT The site I got is installed. Due to this file issue file binary Regarding Oscam emu 11683 from which part of the site I listed below should I download and replace the file binary Regarding Oscam emu 11678 Inside the dream box and image.Dear friends, if you do this kindly and send me the file or the exact location that I can download, thank you . I am waiting for your response. Thanks.


    1-OscamEmu For All

    2-Latest OscamEmu For STAPI & STAPI5 & SH4 & ANDROID - DOWNLOAD ONLY NO CHAT

    3-Latest OscamEmu For Dreambox & VU+ & GXAPI - DOWNLOAD ONLY NO CHAT

    4-Satlodge oscam-emu

  • OSCAM-EMU _CHAT THREAD

    Hello dear managers and friends, I had a question when RUN Computer entered CMD And using Telnet We enter the dream box. Is in Telnet There is a command that can be used to find the location and path of the installed or imported files in the images. Thank you for your help.

  • OSCAM-EMU _CHAT THREAD

    Hello dear managers and friends, I had a question. when Oscam emu Manually install. In such a way that when the file Oscam emu In the folder tmp We have to do it attributes Whether we set it to 755 or not, we should not change it at all and just enter the dream and install it. I am waiting for your response . Thanks

  • OSCAM-EMU _CHAT THREAD


    Quote from boby1979

    if you have openpli go to menu,plugin,red button(remove plugin),softcam ,and select oscam-emu.you must find it there if it"s still exist

    Hello again, my dear friend, I have done this before, but not at all softcam There is not where I want to go and oscam-emu delete. I do not know for myself, it is questionable that it is not here, but when in run Command opkg list : grep oscam file enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips I enter there is still.

  • OSCAM-EMU _CHAT THREAD

    Quote from 1z1z

    Hello my dear managers and friends through the plugin SatVenus Panel Emulator Oscam emu On the image openpli 7 I installed it in Dreambox 7020 HD. Which answered well. Then I asked for a reason Oscam emu Delete. all items Oscam emu Well deleted, just the original file through which Oscam emu It was installed on the dream, everything I do will not be erased. I also through the app File zilla Every time I looked inside the dream, I did not find it. Also according to the image below through cmd Enter the section run In the computer and from there by entering the Dreambox user, enter the Dream and with the command opkg list : grep oscam file enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips Search and find it later with the corresponding command remove Delete the file and dream restart GUI I got that message to be stopped enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips But again, when I search for it in the same way, this file is still in the dream. Thank you for your help and guidance in which part and path of this file is in the Dreambox that I use the program File zilla I can go that route and delete it completely. If you know of any other solution, please let me try. I am waiting for your reply. Thanks


    Hello dear managers and friends, I do everything, file enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips It is not deleted at all. I did all the things you said in all the paths, everything related to the file Oscam emu I deleted it and Lee still has the file enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips There is. Even with plugins Glass system utility The same file enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips I found and deleted the stop message Oscam emu but still the file enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips There is. Again, if you know any steps, let me try so I can wait for your answer. Thanks

  • OSCAM-EMU _CHAT THREAD

    Hello my dear managers and friends through the plugin SatVenus Panel Emulator Oscam emu On the image openpli 7 I installed it in Dreambox 7020 HD. Which answered well. Then I asked for a reason Oscam emu Delete. all items Oscam emu Well deleted, just the original file through which Oscam emu It was installed on the dream, everything I do will not be erased. I also through the app File zilla Every time I looked inside the dream, I did not find it. Also according to the image below through cmd Enter the section run In the computer and from there by entering the Dreambox user, enter the Dream and with the command opkg list : grep oscam file enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips Search and find it later with the corresponding command remove Delete the file and dream restart GUI I got that message to be stopped enigma2 - softcams - all - images - 11681 - emu - r798 - arm+ mips But again, when I search for it in the same way, this file is still in the dream. Thank you for your help and guidance in which part and path of this file is in the Dreambox that I use the program File zilla I can go that route and delete it completely. If you know of any other solution, please let me try. I am waiting for your reply. Thanks

  • OSCAM-EMU _CHAT THREAD

    Hello my dear friend from cccam And from Power vu .I use. If you have another suggestion and solution and others to solve my problem, please. Thanks

  • OSCAM-EMU _CHAT THREAD


    Quote from boby1979

    in order to oscam to read your softcam.key your path has to be like this /etc/tuxbox/config/and here al your oscam files.not /etc/tuxbox/config/oscam/your files.try it.and you may come with some files again if possible

    Hello dear friend the path that I account for cccam I put it here in exactly the same direction. I have been logging in to my Dreambox for several years now. Another point that I said before when the account 11678 I enter. All channels open well. Now, if you have any other suggestions and solutions, thank you. Thanks

  • OSCAM-EMU _CHAT THREAD


    Hello dear managers and friends, I did the same thing and the change that you said, but it did not have any effect on solving my problem. Please, if you have any other suggestions and solutions, let me test it. I am waiting for your response. Thanks

  • OSCAM-EMU _CHAT THREAD

    Hello my dear managers and friends, there is a problem with the OSCAM EMU Versions 11679& 11680 & 11681 & 11682 I have later that although they are installed well, they do not work at all. And no channels are opened, not even channels that code Biss have. Dreambox 7020HD I installed and tested several images on it, but in all the images there was a problem with the OSCAM EMU version 11678 And they work well before that, but with later versions, that is 11679& 11680 & 11681 & 11682 They do not work at all. Also a point that I if the version 11678 Install on Dreambox 7020HD with any type of image, even if the file oscam.server Related to the versions 11679& 11680 & 11681 & 11682 Replace oscam.server Version 11678 and restart the dream again, the OSCAM EMU 11678 Works well and opens all channels and packages. That's why I think the problem of the file oscam.conf is. Below is the file layout oscam.conf In the version 11678 And before that, as well as in later versions, please help me how to solve this problem. I am waiting for your response. thank you


    1- file layout oscam.conf the version 11678 And before


    [global]

    logfile = /tmp/oscam.log

    nice = -1

    waitforcards = 0

    readerrestartseconds = 1

    preferlocalcards = 0

    lb_mode = 2

    lb_save = 100

    lb_nbest_readers = 2

    lb_nfb_readers = 2

    lb_min_ecmcount = 3

    lb_reopen_seconds = 120

    lb_reopen_invalid = 0

    lb_force_reopen_always = 1

    lb_retrylimit = 500

    lb_stat_cleanup = 24

    lb_max_readers = 4

    cccam_cfg_save = 1

    ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j

    disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000


    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]

    request_mode = 1

    delayer = 60

    ecminfo_type = 4

    user = dvbapiau

    read_sdt = 1

    write_sdt_prov = 1

    extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]

    boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]


    [webif]

    httpport = 8888

    httprefresh = 10

    httppollrefresh = 10

    httphidetype = sh

    httpshowpicons = 0

    httppiconsize = 30

    httpshowmeminfo = 1

    httpshowuserinfo = 1

    httpshowreaderinfo = 1

    httpshowcacheexinfo = 1

    httpshowecminfo = 1

    httpshowloadinfo = 1

    httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255

    http_status_log = 1



    2-file layout oscam.conf later versions of the OSCAM EMU 11678


    [global]

    logfile = /tmp/oscam.log

    nice = -1

    waitforcards = 0

    readerrestartseconds = 1

    preferlocalcards = 0

    lb_mode = 2

    lb_save = 100

    lb_nbest_readers = 2

    lb_nfb_readers = 2

    lb_min_ecmcount = 3

    lb_reopen_seconds = 120

    lb_reopen_invalid = 0

    lb_force_reopen_always = 1

    lb_retrylimit = 500

    lb_stat_cleanup = 24

    lb_max_readers = 4

    ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j

    disablecrccws_only_for = 1708:000000;1811:003311,003315;09C4:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000

    cccam_cfg_reconnect_delay = 90

    cccam_cfg_reconnect_attempts = 6

    cccam_cfg_save = 1


    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 4 #[ Use 6 the Best value for (opensource) images only ]

    request_mode = 1

    delayer = 60

    ecminfo_type = 4

    user = dvbapiau

    read_sdt = 1

    write_sdt_prov = 1

    extended_cw_api = 2 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ]

    boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]


    [webif]

    httpport = 8888

    http_style = 0

    http_backround_color = #38383e

    http_text_color = #1e4f8a

    httprefresh = 10

    httppollrefresh = 10

    httphidetype = sh

    httppiconsize = 30

    httpshowmeminfo = 1

    httpshowuserinfo = 1

    httpshowreaderinfo = 1

    httpshowcacheexinfo = 1

    httpshowecminfo = 1

    httpshowloadinfo = 1

    httpallowed = 127.0.0.1,0.0.0.192,168.0.0.0-192.168.255.255

    http_status_log = 1

  • Hello dear managers and friends, I found a problem with the rotating dish motor, please help me

    Hello again, dear friend, regarding the receiver, I must say that I also have a fixed dish that has two directions, Hotbird and Eutelsat 7E, with a switch on the second tuner of my Dreambox (as you know, Dreambox 7020 HD has two tuners). I even tested this when I connect the two fixed dishes to the tuner on which the rotating motor dish is connected, it works well and there is no problem. Now what do you think the problem might be about? Please give me any possibility that solves my problem so that I can try. Thanks.

  • Hello dear managers and friends, I found a problem with the rotating dish motor, please help me

    Hello dear managers and friends, I have been finding a problem with my Rotating dish motor for a few days now. This problem did not exist before. My problem was that all of a sudden the signal quality went down in all directions without changing the dish or the motor or the base. I even took the TV and the receiver to the roof. To make myself comfortable, I connected the receiver to the motor and the TV, then gently pressed the top, bottom, right and left corners of the dish with my finger to see what changes in signal quality. I noticed that in any case when I pressed and moved the dish, the signal quality did not increase, but in some cases it decreased. I also checked the LNB. So I made sure that the dishes and the engine and the alignment of the base and the LNB did not change. However, I opened the antenna wire from the LNB and the motor and opened the dish completely and re-leveled the base of the dish and re-installed the motor and the dish exactly to the south, then exactly all the directions in the same way. I adjusted the disk from 15W in the west to 90E in the east in all directions with the best quality. Then I went down to the house and connected the receiver for a good hour, but then again I was in complete surprise and I saw the signal quality in all directions went down again. I even hit the go to reference or goto 0 from inside the receiver, but no It had no effect and the signal quality is still low. I went to the roof and saw that the dish, the engine, the LED and the base had not changed. I do not know what really happened. I do not know how to open everything again from the beginning and close it, which is probably a good short time again and will break down again. My LNB is Inverto Black Ultra and my receiver is Dreambox 7020 HD and my image is Openpli 7 (HomeBuild 2018.11.25). Where do you think the problem could be? It may be from the image. In fact, I do not want to reset the engine as much as possible. Thank you for your help. I am waiting for your answer, dear ones. Thanks

  • OSCAM-EMU _CHAT THREAD

    Quote from .atari.
    Quote from maurer

    The latest oscam version enigma2-plugin-softcams-oscam_11.678-emu-r798_all.ipk

    the question is for best configuration not oscam binary ! stay by question :head banger:




    Hello dear friend, thank you very much for your answer. Sorry, I had a question about how to configure the file oscam.server You answered my question. I have a Dreambox 7020 HD and an image openpli Now, considering this, is this type of configuration that you put for me better than the configurations that I put? If so, I'll use your config. Next on the subject ( disablecrccws = 1 = ? (Client ) ) should not be inside the file oscam.server Be. Not at all disablecrccws = 1 What is it for? Thank you for your help. I am waiting for your response.

  • OSCAM-EMU _CHAT THREAD

    Hello and thank you dear managers and friends, please guide me to the best and most excellent file configuration oscam.server Which of the 4 configurations and layouts I listed below? Thank you for your help.


    1:Config 1


    [reader]

    label = MyCcCam_1

    enable = 1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = 1

    cccversion = 2.0.11

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = MyCcCam_2

    enable = 1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = 1

    cccversion = 2.0.11

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = MyCcCam_3

    enable = 1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = 1

    cccversion = 2.3.0

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = emulator

    enable = 1

    protocol = emu

    device = emulator

    caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

    detect = cd

    ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE


    2:Config 2


    [reader]

    label = cccam_1

    enable = 1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = 30

    fallback = 0

    group = 1

    emmcache = 2,1,2,1

    blockemm-g = 1

    saveemm-g = 1

    dropbadcws = 1

    disablecrccws = 1

    cccversion = 2.3.0

    cccreshare = 0

    audisabled = 1


    [reader]

    label = cccam_2

    enable = 1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = 30

    fallback = 0

    group = 1

    emmcache = 2,1,2,1

    blockemm-g = 1

    saveemm-g = 1

    dropbadcws = 1

    disablecrccws = 1

    cccversion = 2.3.0

    cccreshare = 0

    audisabled = 1


    [reader]

    label = cccam_3

    enable = 1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = 30

    fallback = 0

    group = 1

    emmcache = 2,1,2,1

    blockemm-g = 1

    saveemm-g = 1

    dropbadcws = 1

    disablecrccws = 1

    cccversion = 2.3.0

    cccreshare = 0

    audisabled = 1


    [reader]

    label = emulator

    enable = 1

    protocol = emu

    device = emulator

    caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

    detect = cd

    ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE


    3:Config 3


    [reader]

    label = cccam_1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    group = 1

    disablecrccws = 1

    cccversion = 2.3.0


    [reader]

    label = cccam_2

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    group = 1

    disablecrccws = 1

    cccversion = 2.3.2

    ccckeepalive = 1


    [reader]

    label = cccam_3

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    group = 1

    cccversion = 2.3.2


    [reader]

    label = emulator

    enable = 1

    protocol = emu

    device = emulator

    caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

    detect = cd

    ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE


    4:Config 4


    [reader]

    label = cccam_1

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    group = 1

    disablecrccws = 1

    cccversion = 2.3.0

    ccckeepalive = 1


    [reader]

    label = cccam_2

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    group = 1

    disablecrccws = 1

    cccversion = 2.3.0

    ccckeepalive = 1


    [reader]

    label = cccam_3

    protocol = cccam

    device = ***

    user = ***

    password = ***

    inactivitytimeout = -1

    group = 1

    disablecrccws = 1

    cccversion = 2.3.0

    ccckeepalive = 1


    [reader]

    label = emulator

    enable = 1

    protocol = emu

    device = emulator

    caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

    detect = cd

    ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE

  • numerical value group In the file oscam.server At oscam emu How much should it be?

    Hello dear managers and friends, 3 accounts cccam I have 3 different servers, each of which has 2 c lines and I have a total of 6 c lines. Now I wanted to know in use oscam emu And in the file oscam.server numerical value grupe How much should it be for these 6 c lines? Is it better to have value in all lines group I put 1 or better value group from the first to the sixth line in order from 1 to 6. Thank you for your help.


    [reader]

    label = MyCcCam_1

    enable = 1

    protocol = cccam

    device = Host,Port

    user = User

    password = Passwd

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = ?

    cccversion = 2.0.11

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = MyCcCam_2

    enable = 1

    protocol = cccam

    device = Host,Port

    user = User

    password = Passwd

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = ?

    cccversion = 2.0.11

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = MyCcCam_3

    enable = 1

    protocol = cccam

    device = Host,Port

    user = User

    password = Passwd

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = ?

    cccversion = 2.3.0

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = MyCcCam_4

    enable = 1

    protocol = cccam

    device = Host,Port

    user = User

    password = Passwd

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = ?

    cccversion = 2.0.11

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = MyCcCam_5

    enable = 1

    protocol = cccam

    device = Host,Port

    user = User

    password = Passwd

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = ?

    cccversion = 2.0.11

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1


    [reader]

    label = MyCcCam_6

    enable = 1

    protocol = cccam

    device = Host,Port

    user = User

    password = Passwd

    inactivitytimeout = -1

    reconnecttimeout = 10

    cacheex_block_fakecws = 1

    group = ?

    cccversion = 2.3.0

    cccmaxhops = 1 # dont use higher than 3 !!!

    dropbadcws = 1

    ccckeepalive = 1

    cccwantemu = 1

  • Stop problem in the package NC+ Poland when using OSCAM EMU Please help me.

    748/5000

    Hello dear managers and friends of oscam emu 11669 I use and my image open pli Is. I'm on the package NC+ Poland I have a problem especially with the system seca It opens I have a problem and that problem is that after 20 to 30 or 40 minutes of watching, a 7 to 9 second image stop is created. I have no problem with other packages and channels with different systems on different satellites, my only problem is with the package NC+ poland Now I wanted to see how I could figure out where the problem came from. In some parts of the site it is said to find some problems opening card channels from Live Log Use and find the problem and its cause. I wanted to tell you the method Live Log How is it and from which part and how should I watch it and give it to you so that maybe this problem of mine will be solved, thank you.

  • OSCAM-EMU _CHAT THREAD

    Hello and thanks my managers and dear friends a problem with oscam EMU 11650 I have. Yesterday oscam EMU 11650 Make online from the satvenus panel I installed it well on Dreambox 7020 HD and the files oscam.server And oscam.config And oscam.user Take that on the track etc/tuxbox/config As always, set your account username and password in the file oscam.server I entered and then replaced and put their attribute 755 and then oscam EMU 11650 I restarted and dreamed once to make sure. But None of the channels and packages do not open at all, and in fact the emulator does not work at all. I did until yesterday and before installing the oscam EMU 11650 On your dream box oscam EMU 11642 I had that worked well. Thanks for the help. I am waiting for your answer and guidance. Thank

  • The problem of not starting oscam emu 11581 support cccam

    Hello dear friends and managers, I had a question about oscam emu 11581 support cccam . My problem is after installing and setting up the files oscam.server , oscam.cofig , oscam.user In the start section oscam emu I do everything oscam emu It will not be activated and message no camd Gives. Thank you for your help. I am waiting for your response.