Posts by 1z1z

Hello, dear friends, can you help me with the question and problem below. I mentioned it in other sections, but I didn't get any results. Thank you for helping me.

Hello and thank you dear managers and friends, please help me. My problem is with the Swiss package on the Hotbird satellite. I have been getting an account from a proper source for several years now. Until 1 month ago, all packages, including the Swiss package, were excellent. But for some time now, the Swiss package has a long stop every 2 to 5 minutes and sometimes every 10 minutes for 15 to 20 seconds. I have Dreambox 7020 HD which image OPEN pli 11.3 is installed on it, and now I have also installed the most up-to-date Oscam emu 11715 V8 it still has a problem, even the versions of 11714 And 11713 and I installed the rest, but I still have this problem with the Swiss package. I even talked to the person in charge of the server from which I received the cccam account, and he said that there is no problem on the part of the server. Please help me, what should I do, should I make changes in the settings of the Oscam emu files or not ? I am waiting for your answer and guidance. Thanks

Note: By the way, my dear friends, I did a test last night with Oscam emu 11711 which only freezes for 1 to 2 second when using it. But when using other versions of Oscam emulators stops of 15 to 20 seconds happen.

Hello and thanks

My dear friend downloaded the OSCam 11.715-emu-r798 ALL Images mips - arm file from the site and entered it in the tmp section of the Dreambox, then installed the file through Dreambox and installed the Dreambox restart GUI. Then he entered the Dreambox through the file zilla program, received the installation files in the etc/tuxbox/config section, opened them inside the computer with the notepad++ program, made changes including entering the cccam account lines, and then entered them again with the file zilla program into the Dreambox. and changed the Dreambox to restart.

Now, according to the above, if you need any guidance or other things, please let me know and I will do it.

Hello and thank you dear managers and friends, please help me. My problem is with the Swiss package on the Hotbird satellite. I have been getting an account from a proper source for several years now. Until 1 month ago, all packages, including the Swiss package, were excellent. But for some time now, the Swiss package has a long stop every 2 to 5 minutes and sometimes every 10 minutes for 10 to 15 seconds. I have Dreambox 7020 HD which image OPEN pli 11.3 is installed on it, and now I have also installed the most up-to-date Oscam emu 11715 V8 it still has a problem, even the versions of 11714 And 11713 and I installed the rest, but I still have this problem with the Swiss package. I even talked to the person in charge of the server from which I received the cccam account, and he said that there is no problem on the part of the server. Please help me, what should I do, should I make changes in the settings of the Oscam emu files or not ? I am waiting for your answer and guidance. Thanks

Hello, managers and dear friends, unfortunately, with the installation of emulators Oscam Emu 11.713 and Oscam Emu 11.714 still the channels of the Swiss package on the Hotbird satellite freeze and stop, and sometimes they don't even open. Do I have to make changes in the settings of the files oscam.config or oscam.server or other files in Oscam Emu 11.713 and Oscam Emu 11.714 or not? My device is Dreambox 7020 HD and the image is OPEN PLI 11.3

Thank you for your help and guidance.

Hello dear friends and managers, please in the section Oscam emu ALL Images mips--arm .ipk .deb Also insert the OSCAM EMU 11701 file. We are waiting for your grace, gentlemen. Grateful

Quote from 1z1z

Hello my dear managers and friends Oscam emu 11695 I installed it on the image in my dreambox. Now I wanted to see if there was a way that could be in the file oscam.dvbapi blocked the reception of some codes, ie created ignore ( I ) mode in some codes so that, for example, some channels or packages can no longer be opened with a special coding system or code. Please tell me exactly the text of the creation of igno to block the desired code. I did everything and put the ignore mode in the file in different ways oscam.dvbapi I entered it did not work at all. Thank you.

Hello dear managers and friends, please help me with the above question, I urgently need to solve this problem. Please help me. I am waiting for your answer, dear managers and friends.

Hello my dear managers and friends Oscam emu 11695 I installed it on the image in my dreambox. Now I wanted to see if there was a way that could be in the file oscam.dvbapi blocked the reception of some codes, ie created ignore ( I ) mode in some codes so that, for example, some channels or packages can no longer be opened with a special coding system or code. Please tell me exactly the text of the creation of igno to block the desired code. I did everything and put the ignore mode in the file in different ways oscam.dvbapi I entered it did not work at all. Thank you.

Quote from 1z1z

Hello dear managers and friends

Regarding Oscam emu 11691 And insert an account cccam according to the relevant structure in the file cccam.cfg that whatever I did, no channel was opened while the account cccam Import yourself according to the relevant structure of the file oscam.server I say the channels open well. I had a request that you tell me exactly what I should do to get an account cccam Import the file cccam.cfg to open the channels. Please help me so that I can use the feature cccam.cfg At Oscam emu 11691 I will also use. Thank you. I am waiting for your answer, dear ones.

Quote from .atari.

Install oscam in your image use the configs files in my Signatur and edit only

Device = address,port

User

Pass

with your data … restart oscam

Hello dear friend about the emulator Oscam emu 11691 Let me state the following to make my problem clearer.

I put in an account cccam In the file oscam.server And open channels using files oscam.server I do not have a problem.

My problem using the file cccam.cfg that is by placing an account cccam In the file cccam.cfg Unfortunately the channels do not open.

My emphasis on using the file cccam.cfg At Oscam emu 11691 This is because, for example, if I wanted package channels NC+ With the Nagra system of one C line do not code to have this feature and I can do it easily.

Example of restricting C line In the file cccam.cfg I brought it down.

C: yourhost.dyndns.org 12000 user pass no {1806:0}

Hello dear managers and friends

Regarding Oscam emu 11691 And insert an account cccam according to the relevant structure in the file cccam.cfg that whatever I did, no channel was opened while the account cccam Import yourself according to the relevant structure of the file oscam.server I say the channels open well. I had a request that you tell me exactly what I should do to get an account cccam Import the file cccam.cfg to open the channels. Please help me so that I can use the feature cccam.cfg At Oscam emu 11691 I will also use. Thank you. I am waiting for your answer, dear ones.

Hello dear managers and friends, a question about Oscam emu 11691 I have. I wanted to know in Oscam emu 11691 account cccam In your file cccam.cfg It is better to enter in the file oscam.server To enter. For better quality and higher stability in opening account card channels cccam Insert one of the files I mentioned above. Thank you for your help. Thank

Quote from MOHAMED_OS

@samur @1z1z

To work the OSCAM version
You should only install libcurl4

Code

Image :: OE2.0

opkg install libcurl4

Image :: OE2.5/2.6

apt-get install libcurl4

or use IPK file

and if use this oscam support of smargo Reader

will be install this package

Code

.:. Image :: OE2.0

opkg install libusb-1.0-0 libssl1.0.2 libpcsclite1

Image :: OE2.5/2.6

apt-get install libusb-1.0-0 libssl1.0.0 libpcsclite1

Display More

Hello and thank you dear friend

One problem is that when I want to have an image on a Dreambox 7020 with an image OpenPLi 7 (HomeBuild 2018.11.25) it contains a file libcurl4 Install the message that it is not possible to install, followed by a message stating that the file must be installed first libssl ... Install to allow the file to be installed libcurl4 So only if the file first libssl ... Install and then the possibility of installing the file libcurl4 is provided. I tested these cases myself. thank you.

Quote from jhon32

Quote from 1z1z

Quote from jhon32

try this from

audi06_19

Hello dear friend, regarding this file that you left, because I tested it completely before, the problem I have with this file is that when I install it, later, if a new file comes OSCAM EMU I will do everything, delete the previous original file. Cannot install new file instead.

yes must delete manual from

usr / bin oscam

etc / tuxbox / config delete oscam folder

etc / initd oscam script

and full restart

Display More

Dear friend, but I have done all these things before and I have deleted the relevant files from these parts and with the following commands OSCAM EMU I deleted it, but still that original file still remains in the image. I do not know why this is so.

opkg list-installed | grep name

opkg list | grep name

opkg remove name

Quote from jhon32

try this from

audi06_19

Hello dear friend, regarding this file that you left, because I tested it completely before, the problem I have with this file is that when I install it, later, if a new file comes OSCAM EMU I will do everything, delete the previous original file. Cannot install new file instead.

Quote from 1z1z

Hello dear friends and managers, I have a problem, please help me.

in part Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT Files OSCAM EMU by a dear friend MOHAMED_OS I put everything I did, it will not be installed on Dreambox 7020, which has an image OpenPLi 7 (HomeBuild 2018.11.25) And these files are installed only when I first install the file libcurl4 on the image. To install libcurl4 I must first install the file libssl ... After installing these two files, it is possible to install the files OSCAM EMU by MOHAMED_OS Dear puts in the section provided. But the important point here is that the file that enigma1969 dear for OSCAM EMU 11691 In the contract section without the need for two files libcurl4 And libssl ... easily installed on my image. Now, where do you think the problem comes from? Is the file better OSCAM EMU Without installing two files libcurl4 And libssl ... to install the drive or not, it is better to install each file .... in the image of two files. . .. and ... to install in the image. Thank you for your help.

Quote from samur

1z1z

Sorry,

install oscam versions without these libraries: libcurl4, libssl and libpng.....;

because MOHAMED_OS  Mix everything ,he takes source code from NCam " fairbird " and integrate it to oscam without making any explanations....;

if you want to understand why the guys use these libraries take a look here:

Ncam Emu compiled and patched by READ

&&

https://github.com/fairbird/NCam

&&

https://curl.se/

there are more things to explane but i m tired to continue.......!!!

;

Display More

Hello dear managers and friends, according to my question above and the answer to that samur Dear, they gave it. Now, please help me from which part of the site I can find the best file OSCAM EMU Download it now or in the future and install it on my Dreambox 7020HD with the image OpenPLi 7 (HomeBuild 2018.11.25) on it. Thank you for your help.

Hello dear friends and managers, I have a problem, please help me.

in part Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT Files OSCAM EMU by a dear friend MOHAMED_OS I put everything I did, it will not be installed on Dreambox 7020, which has an image OpenPLi 7 (HomeBuild 2018.11.25) And these files are installed only when I first install the file libcurl4 on the image. To install libcurl4 I must first install the file libssl ... After installing these two files, it is possible to install the files OSCAM EMU by MOHAMED_OS Dear puts in the section provided. But the important point here is that the file that enigma1969 dear for OSCAM EMU 11691 In the contract section without the need for two files libcurl4 And libssl ... easily installed on my image. Now, where do you think the problem comes from? Is the file better OSCAM EMU Without installing two files libcurl4 And libssl ... to install the drive or not, it is better to install each file .... in the image of two files. . .. and ... to install in the image. Thank you for your help.

Hello and dear managers and friends, I had a question about how to arrange the lines in the file oscam.server Regarding Oscam emu Please guide whether between the word and the sentence before the sign = To mark = Should the distance be or not just the size of one space Be the distance. I asked my question in two examples below. Thank you for your answer.

Lines with several space or more space between the first word or sentence of each line

[reader]

label = MyCcCam_1

enable = 1

protocol = cccam

device = ***

user = ***

password = ***

inactivitytimeout = -1

reconnecttimeout = 10

cacheex_block_fakecws = 1

group = 1

cccversion = 2.0.11

cccmaxhops = 1 # dont use higher than 3 !!!

dropbadcws = 1

ccckeepalive = 1

cccwantemu = 1

Lines with only one space or the smallest distance between the first word or sentence of each line

[reader]

label = MyCcCam_1

enable = 1

protocol = cccam

device = ***

user = ***

password = ***

inactivitytimeout = -1

reconnecttimeout = 10

cacheex_block_fakecws = 1

group = 1

cccversion = 2.0.11

cccmaxhops = 1 # dont use higher than 3 !!!

dropbadcws = 1

ccckeepalive = 1

cccwantemu = 1

Quote from jhon32

this is my bin

Hello dear friend, forgive this file OSCAM EMU In response to my question, did you put it in this section or not? Then I can ask what your device is and what image you are using. Thanks

Hello dear friends and managers. I wanted some guidance. I have to install Oscam emu 11684 In the image Openpli 7 (Home Build) in the Dreambox 7020HD First the file enigma2-plugin-softcams-oscam_11.684-emu-r798_IPK.zip From the section " Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT " I received and installed. Then I have a kernel or file because of a problem I had Binary File it Binary I will replace it with Oscam emu 11684 work well. I have all the files Binary I tested that in different parts of the site, which is finally the best file oscam-svn11684-mipsel-emu-r798.zip Is from the section " The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS - DOWNLOAD ONLY NO CHAT " I got on the site. Now I wanted to see your opinion considering as part of that file Binary I took it and replaced the file Binary Installed on the image and dream box, I got a problem in opening the networks in terms of quality and quantity in use Oscam emu 11684 Does not cause? I am waiting for your response. Thank you for your help.

Hello, dear managers and friends, please forgive me, please help me to first update the file libcurl4 Where should I download and inside Dreambox 7020HD On which the image Openpli 7 (Home Build) There I have to install that file. Later in a few sections of the site they said just enough of the episode RUN PC window CMD Open and use Telnet Entered the dream and the order opkg update && opkg install libcurl4 Ran. Here a question arises unless there is a file libcurl4 and without connecting Dreambox to the Internet and just by entering this command in Telnet This is done. Thank you for your detailed guidance. I am waiting for your response . Thanks

Quote from 1z1z

Hello dear managers and friends, a question about the file binary Regarding oscam emu I have . I wanted to see, considering that I have a Dreambox 7020HD and an image on it openpli 7(Home Build) And Oscam emu 11678 Previously from the section Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT The site I got is installed. Due to this file issue file binary Regarding Oscam emu 11683 from which part of the site I listed below should I download and replace the file binary Regarding Oscam emu 11678 Inside the dream box and image.Dear friends, if you do this kindly and send me the file or the exact location that I can download, thank you . I am waiting for your response. Thanks.

1-OscamEmu For All

2-Latest OscamEmu For STAPI & STAPI5 & SH4 & ANDROID - DOWNLOAD ONLY NO CHAT

3-Latest OscamEmu For Dreambox & VU+ & GXAPI - DOWNLOAD ONLY NO CHAT

4-Satlodge oscam-emu

Display More

Quote from boby1979

to change the bin file you should go in usr/bin oscam,but be sure that the file has 755 atributes

Hello dear friends and managers, I meant the above question, considering that it is on Dreambox 7020HD My image openpli 7 (Home Build) And oscam emu 11678 That of the section Latest OscamEmu For ALL Images Mips Arm Sh4 IPK & DEB - DOWNLOAD ONLY NO CHAT I downloaded and installed the site. Now to be able to scam emu 11683 Using the file binary It's on the dream box and the image openpli 7 (Home Build) I can install which of the sections of the site that I mentioned below I can file binary Regarding oscam emu 11683 Get it and import it into Dreambox 7020HD and Image openpli 7 (Home Build) To. I am waiting for your answer. Thanks