Posts by 1z1z

Quote from pinokio0

Quote from 1z1z

Code

Hello, I would like to request the OSCAM emu 11943 emulator file, which is the latest version of OSCAM emu and is compatible with Dreambox One and Merlin Image. I would appreciate it if you could post or send the file to me in this section. Thank you.

I wrote you a nice article before about how to install OScam into your Dreambox One when you had Germini 4.20, but it seems you're not reading anything, and I also sent you Levi4 5 OScam and you're asking again what you need.

Hello dear friend, no matter what I do now, oscam emu Levi4 won't install on the Dreambox One that has the Merlin image GP4.2 on it. It didn't install on the image before either.

I transfer the OScam file to the tmp section through the FileZilla program and perform the installation through the Dreambox itself, but no emulator is installed or created on the Dreambox.

Hello, I would like to request the OSCAM emu 11943 emulator file, which is the latest version of OSCAM emu and is compatible with Dreambox One and Merlin Image. I would appreciate it if you could post or send the file to me in this section. Thank you.

Hello dear friends and administrators, now I am looking for the GP4.2 AIO image. Is there any other image that can be installed on the Dreambox One flash without any problems? For example, the OpenPLi 9.1 image or other images. It should also have the picture-in-picture feature. Because the truth is that in the GP4.2 AIO image, there is a freeze and delay in the sub-image during picture-in-picture. Then, it is slow and sometimes not accurate when using the rotating dish. Thank you again, as always, for your help.

Quote from 1z1z

Hello dear friends and administrators, sorry, I have a Dreambox One and the image GP4.2 AIO is installed on it.

I installed the emulator Oscam emu 11943 online. I have included all the relevant images below. But no matter what I did, I could not open the card channels and the channels that are locked with the code Biss.

I have a request from you, considering the files in the folder Config and the images that I have placed below, please help me as always, what changes should I make in the files I placed so that the card channels can be opened. I am waiting for your answer.

Thank you.

Hello dear friends and administrators, I would like to thank you all for your guidance.

I would just like to thank you again for helping me solve the problem I mentioned above. I am waiting for your response, dear ones.

Hello dear friends and administrators, sorry, I have a Dreambox One and the image GP4.2 AIO is installed on it.

I installed the emulator Oscam emu 11943 online. I have included all the relevant images below. But no matter what I did, I could not open the card channels and the channels that are locked with the code Biss.

I have a request from you, considering the files in the folder Config and the images that I have placed below, please help me as always, what changes should I make in the files I placed so that the card channels can be opened. I am waiting for your answer.

Thank you.

Hello dear friends and administrators, sorry, I have encountered a problem in the continuation of the above question.

I installed the emulator Oscam emu 11943 online. I have included all the relevant images below. But no matter what I did, I could not open the card channels and the channels that are locked with the code Biss.

I have a request from you, considering the files in the folder Config and the images that I have placed below, please help me as always, what changes should I make in the files I placed so that the card channels can be opened. I am waiting for your answer.

Thank you.

Hello and thanks for your advice

I took quality pictures as you said and put them below.

Then as I told you, when I use the picture-in-picture feature, there is a very, very small delay and freeze. Do you dear ones also have this problem? I completely understand all the things you said about the picture-in-picture, but this very, very small delay and freeze is annoying.

Dear friends and managers, I would appreciate it if you could answer the rest of my questions below.

Hello and thanks for the tips.

Dear administrators and friends, I have a few questions because I just got the Dreambox One (my installed image is GP4.2 AIO).

Now, considering that I don't have much knowledge and awareness about it, I have a few questions. Please help me as always.

1- What are the best settings for having a quality image? My TV is full HD. I have put my current device settings below.

2- When I use the picture-in-picture feature on the Dreambox One, the sub-image has a very, very small delay and freezes.

3- When using the motorized dish, there is a lot of delay in moving from one satellite to another. I have put the image of the current settings of the dish on my Dreambox One below. (The dish, etc. are not a problem because with the Dreambox 7020 HD, moving between directions is great with this dish)

4- What is the best skin where complete information is available? If you know of some examples, please let me test them.

5-What is the best image for the Dreambox One, other than the one I have on my Dreambox One right now?

Thank you for your help.

Quote from 1z1z

Hello and thanks for the tips.

Dear administrators and friends, I have a few questions because I just got the Dreambox One (my installed image is GP4.2 AIO).

Now, considering that I don't have much knowledge and awareness about it, I have a few questions. Please help me as always.

1- What are the best settings for having a quality image? My TV is full HD. I have put my current device settings below.

2- When I use the picture-in-picture feature on the Dreambox One, the sub-image has a very, very small delay and freezes.

3- When using the motorized dish, there is a lot of delay in moving from one satellite to another. I have put the image of the current settings of the dish on my Dreambox One below. (The dish, etc. are not a problem because with the Dreambox 7020 HD, moving between directions is great with this dish)

4- What is the best skin where complete information is available? If you know of some examples, please let me test them.

5-What is the best image for the Dreambox One, other than the one I have on my Dreambox One right now?

Thank you for your help.

Display More

Hello and thanks for the tips.

Dear administrators and friends, I have a few questions because I just got the Dreambox One (my installed image is GP4.2 AIO).

Now, considering that I don't have much knowledge and awareness about it, I have a few questions. Please help me as always.

1- What are the best settings for having a quality image? My TV is full HD. I have put my current device settings below.

2- When I use the picture-in-picture feature on the Dreambox One, the sub-image has a very, very small delay and freezes.

3- When using the motorized dish, there is a lot of delay in moving from one satellite to another. I have put the image of the current settings of the dish on my Dreambox One below. (The dish, etc. are not a problem because with the Dreambox 7020 HD, moving between directions is great with this dish)

4- What is the best skin where complete information is available? If you know of some examples, please let me test them.

5-What is the best image for the Dreambox One, other than the one I have on my Dreambox One right now?

Thank you for your help.

Hello dear friend, as you can see in the image, there is only the file gp4-cam-feed-configs in the folder Nobody Softcam Now, apart from this file, there are no other files in the folder Nobody Softcam What should I do now?

Another question, from which part of the site can I get the latest version of the binary file of Oscam emu for Dreambox One?

Hello my dear friends, I updated my Dreambox One according to some instructions including apt update and apt-get upgrade -y My image is GP4.2 AIO

Then I manually installed the file gp4-cam-feed-configs Now help me to install the latest version of the emulator Oscam emu online.

I have put the image of the Addon-Manager section and the image of the Nobody SoftCam section below. Please guide me how to install the latest version of the emulator Oscam emu online.

Hello again

Dear friend, I understand what you are saying. By the way, I connect the internet modem and Dreambox One to the Linksys router.

Then to test, I go into the Dreambox One and the plugin section and then I press the red button that means Manage extensions but nothing happens. And no download is done.

By the way, I know that if I connect the internet modem directly to the Dreambox One, the download operation is done in the plugin section and by pressing the red button, which means Manage extensions, but I want to know whether the download operation is also done in the situation that I said above?

Now I have a question for you, dear friend, with these things I said and that the Dreambox One and the internet modem are connected to the Linksys router and when I enter the plugin section and press the red button that means Manage extensions, should the download take place or not?

Now, if in your opinion the download operation should be performed, then why is there no download for me.

I also put these pictures above so that if there are problems with my settings, you can advise me.

Thank you

Hello dear friends, I have a question. When the internet modem and Dreambox One are connected to the router and I go to the plugins section in Dreambox One and click the red button, which means Manage extensions, shouldn't it start downloading like when the Dreambox One is directly connected to the internet modem?

When I connect the internet modem and Dreambox One to the router and go to the plugins section and click the red button, which means Manage extensions, nothing happens. But when I connect the Dreambox One directly to the internet modem and do this, the download is activated and starts downloading.

I am posting pictures of the modem, router, and Dreambox One network settings below. Please advise. If there is a problem with my settings, please let me know. I would be grateful.

Dear friends, regarding Dreambox One and Image GP4.2 AIO in the file oscam.conf option extended_cw_api = ? what should its value be? The value should be 1 or 2. Which should it be?

By the way, what is the best OSCAM EMU for Dreambox One with image GP4.2 AIO ? Please send me the file.

Hello dear friends, I have a Dreambox One with the image GP4.2 AIO installed on it.

I installed an OScam emu on it and now I want to delete and remove that OScam emu. Everything I did didn't work. With the commands dpkg -r and opkg remove nothing happens at all. By the way, what is the best OSCAM EMU for Dreambox One with image GP4.2 AIO ? Please send me the file.

Please advise how to remove it.

No, I didn't install it.

The problem is that when I click the yes all option according to the image above, I think it will take 4 to 5 hours for Dreambox One to install the One Image, and when I realized this, I turned off Dreambox. When I click the NO option, nothing happens. I haven't tested the YES BUT ONLY SOME option yet to see what happens.

Hello dear friends, I have a problem installing the image GP4.2 AIO on the Dreambox One. As you can see in the image below, after sending the image to the Dreambox One, this message appears:

First, what is the problem that this message appears on the Dreambox One.

Second, which option should I choose?