Posts by fegol

Post

RE: Oscam Icam TVHeadend

(Quote from zeyret)

service.tvheadend42-21.0.0.zip
service.tvheadend43-21.0.106.zip
(CoreELEC-Amlogic-ne.aarch64-21.0-Omega_nightly_20230322)
I haven't tested it and I don't know how it works.

fegol

Mar 22nd 2023

CoreELEC-Amlogic-ne.aarch64-21.0-Omega_nightly_20230322..., On Wednesday, it was only Amlogic-ne...

#################################

Quote from oastra

I use a odroid N2+ with coreelec 21.0-Omega_nightly

So i test the tvheadend version "theadend43-21-0-106-zip for coreelec 21.0 Omega" from fegol but It dont work

Is this version wrong for my hardware ?

In the case of your device, another one must be built... (CoreELEC-Amlogic-ng.arm-21.0-Omega_nightly_20230323...)

Quote from apuokas

Vielen Dank für deine Mühe! Ich habe heute alle 4 Variante getestet. Gleiches Setup wie in Post vorher beschrieben. Beide vdr-dvbapi-with-a-test-patch's haben gleiches wie gestern gebracht: 1) OSAM livelog reagiert nicht, oder reagiert nach lange Zeit; deutlich besser ist es wenn man zuerst normales Kanal einschaltet und danach kodiertes. 2) OSCAM log zeigt als ob er würde dekodieren 3) vlc (win11) verhält sich als ob alles normal wäre außer: kein video, kein audio.
Bei beiden normalen vdr-dvbapi's war alles gleich, außer: vlc hat audio und video normal abgespielt!!! Nur wenige Artefakte manchmal. Bessere Umschaltzeiten zw. Kanäle und das Umschalten hat FAST immer Erfolg. Interessant dabei: wenn ich von kodiertes SKY-Kanal auf free-SD-Kanal schalte, video wird in viele kleine Quadrate aufgeteilt und die werden vermischt. Erst wenn ich ins free-HD-Kanal schalte, wird video wieder normal, danach free-SD auch normal.
Ich vermute, dass vdr-dvbapi-with-a-test-patch's nicht unbedingt funktionsunfähig sind: es könnte auch am vlc(win11) liegen (oder vlc Einstellungen- kenne mich nicht aus). Ich sollte auch andere Player, wie kodi(win und lin), vlc(lin) probieren. Weiter, es könnte oscam-client selbst oder seine Einstellungen (wohl kaum) schuld sein.
Vor allem, interessant wäre auch oscam-icam-sky über dvbapi mit: minisatip, satpi zu verbinden. Tvheadend mag ich irgendwie nicht seit meine Erfahrungen vor lange Zeit. Vielleicht ist er besser geworden aber... tja... Geschmackssache... Am liebsten habe ich jedoch vdr-streamdev-server + kodi-simpleiptv-addon

Bitte lesen Sie Punkt 8 der Readme sorgfältig durch... (8. Fast ECM)

Ich bin kein Experte auf diesem Gebiet und verwende vdr nicht, aber ich vermute, dass FAST_ECM nicht mit mehreren Kanälen gleichzeitig funktioniert oder fehlerhaft ist und VDR möglicherweise nicht in der Lage ist, Plugins richtig zu handhaben, die mehrere Kanäle verwenden können auf einmal.

Es stimmt, dass FAST_ECM, beschrieben in Punkt 8 der Readme, nur für FFdecsa funktioniert, nicht für libdvbcsa.

(Und ich denke, dass vdr-plugin-softhddevice deswegen auch fehlerhaft ist ...)

Aber wenn Sie mehrere Kanäle gleichzeitig wollen, dann würde es sich meiner Meinung nach lohnen, mit minisatip und vdr-plugin-satip herumzuspielen, ohne vdr-plugin-dvbapi.

Um den Minisatip mit dem Oscam zu verbinden.

Im Fall von minisatip müssen Sie keinen Patch hinzufügen, da icam bereits enthalten ist, Sie benötigen nur libdvbcsa...

Ich kann nicht garantieren, dass das wirklich existiert und funktioniert, es ist nur ein Tipp, nur für den Fall ...

(mit schnellem ecm ist es nicht einfach und es gibt viele probleme ...)

(translate.google)

Quote from zeyret

Can you give İcam TVheadend43 and 42 for Corelec Kodi 21 (Omega) Aarch64? Original TVHeadend Sky does not work on their channels.

Thanks...

service.tvheadend42-21.0.0.zip

service.tvheadend43-21.0.106.zip

(CoreELEC-Amlogic-ne.aarch64-21.0-Omega_nightly_20230322)

I haven't tested it and I don't know how it works.

Kein Bouquet oder Stream-Relay etc... spezielle Einstellung,

es werden nur die traditionellen Einstellungen von vdr-plugin-dvbapi benötigt.

Ich habe es auf verschiedene Arten zusammengestellt, wenn Sie möchten, probieren Sie es aus, um zu sehen, ob eine davon erfolgreicher ist.

vdr-dvbapi-2.zip (amd64 ubuntu 22.04)

(translate.google)

Quote from piterfree

Quote from urie

Quote from jenseneverest

x-man

As has been said multiple times.

You need the patched version of oscam from the first post

You need an icam channel list

You need the correct configs for the caid your tying to decode.

You need a share or a valid card for the caid your trying to decode.

Without all 4 you will only have a blank screen.

Display More

If enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk has patched binary and lib files file then why all confusion with all individuall binaries posted , I think some are installing the ipk and even the copying bin file over and could someone just not make deb version ?

I understand it is getting out of control now to many questions and two or more threads going at once so one closed for that reason just the one now

But still same questions :((

Display More

like that file that you put on video....ipk
better delete it...from your post...
I tested it on my dream_920 and it killed it it doesn't start anymore
it was just to give you confirmation that a simple ipk is done.

Display More

I don't know what could have caused dream_920 to die, but I have looked at the IPK file you mentioned, which you say is considered faulty, and jenseneverest changes should not cause bugs that could kill or destroy devices.

Changes in IPK: binary file swap and minor tweaks to oscam's default configuration, and oscam moves to /usr/bin instead of /usr/softcams when installing the OpenVIX image file.

I don't think that in your case this IPK file and the oscam binaries and configs it contains are entirely responsible for killing your device.

You should investigate more thoroughly what could have caused your device to malfunction, so that others do not find themselves in the same or similar unpleasant situation.

it is possible that on some devices it works in the /usr/softcams folder instead of the /usr/bin folder, but it would be worth investigating or finding out more...

(translate.google)

vdr-dvbapi.zip (amd64 ubuntu 22.04)

Quote from Sat-An

Is there really no one can answer the question, so that I will not waste time unnecessarily to solve the problem (can you open the PowerVu channels on 16E (Ippica1/2, Snai), 4.8E (SIS Live), 1W (Occas.Feed).

post # 2,150

Cheers/ Sat-An

1.0°W (12643 V):

4.8°E (11727 H, 12418 H):

9.0°E (11804 V) au:

16.0°E (12724 H):

Quote from t_gumienny

a new version of coreelec 20 nexus has been released.
does anyone have oscam for nexus?

The files of the older openssl library were also included in the add-on, so here on the forum you have a better chance of choosing between the oscam binaries...

I haven't tested it on the coreelec 20 nexus, and I can't guarantee that it works.

service.softcam.oscam-20.0.1.11718-798.zip

marcus83

Is OSCam on Linux or Windows?

Maybe you can check it in a linux terminal with this command: ls /dev/serial/*/

or

OSCam/en/Config/oscam.server – Streamboard Wiki

Quote from roisiano

Quote from zeyret

Quote from fegol

For CoreELEC 19 and 20, if the device is Amlogic-ng

patches should be added to project/Amlogic-ce/packages/addons/service/tvheadend43/patches folder,

if the device is not Amlogic-ng, then to the packages/addons/service/tvheadend43/patches folder.

(applies to 19 and 20 separately)

CoreELEC TVH (Amlogic) addons 9.2.zip 19.5.zip 20.0.zip

(Created using GitHub Actions.zip)

Display More

Thanks, SKY channels now work perfectly at CE 20

Display More

Hello, fegol .

Is still working well your "actions.zip" (fo create CoreELEC addons)?

https://www.linuxsat-support.c…hment/208299-actions-zip/

In the past, I tried to make it work with github actions and it worked without any problems and created the add-ons.

Now, when I try to use github actions with your files, I get errors:

Code

In file included from /usr/include/signal.h:328,
 
from ./signal.h:52,

from /home/runner/work/tvheadend-addon-patched-for-CoreELEC/tvheadend-addon-patched-for-CoreELEC/CoreELEC/build.CoreELEC-Amlogic-ng.arm-19/build/m4-1.4.18/lib/c-stack.c:49:

/home/runner/work/tvheadend-addon-patched-for-CoreELEC/tvheadend-addon-patched-for-CoreELEC/CoreELEC/build.CoreELEC-Amlogic-ng.arm-19/build/m4-1.4.18/lib/c-stack.c:55:26: error: missing binary operator before token "("

55 | #elif HAVE_LIBSIGSEGV && SIGSTKSZ < 16384

| ^~~~~~~~

/home/runner/work/tvheadend-addon-patched-for-CoreELEC/tvheadend-addon-patched-for-CoreELEC/CoreELEC/build.CoreELEC-Amlogic-ng.arm-19/build/m4-1.4.18/lib/c-stack.c:107:1: warning: 'die' defined but not used [-Wunused-function]

107 | die (int signo)

| ^~~

make[3]: *** [Makefile:1910: c-stack.o] Error 1

make[3]: *** Waiting for unfinished jobs....

make[3]: Leaving directory '/home/runner/work/tvheadend-addon-patched-for-CoreELEC/tvheadend-addon-patched-for-CoreELEC/CoreELEC/build.CoreELEC-Amlogic-ng.arm-19/build/m4-1.4.18/.x86_64-linux-gnu/lib'

make[2]: *** [Makefile:1674: all] Error 2

make[2]: Leaving directory '/home/runner/work/tvheadend-addon-patched-for-CoreELEC/tvheadend-addon-patched-for-CoreELEC/CoreELEC/build.CoreELEC-Amlogic-ng.arm-19/build/m4-1.4.18/.x86_64-linux-gnu/lib'

make[1]: *** [Makefile:1572: all-recursive] Error 1

make[1]: Leaving directory '/home/runner/work/tvheadend-addon-patched-for-CoreELEC/tvheadend-addon-patched-for-CoreELEC/CoreELEC/build.CoreELEC-Amlogic-ng.arm-19/build/m4-1.4.18/.x86_64-linux-gnu'

make: *** [Makefile:1528: all] Error 2

FAILURE: scripts/build m4:host during make_host (default)

*********** FAILED COMMAND ***********

make ${PKG_MAKE_OPTS_HOST}

**************************************

FAILURE: scripts/build m4:host has failed!

The following log for this failure is available:

/home/runner/work/tvheadend-addon-patched-for-CoreELEC/tvheadend-addon-patched-for-CoreELEC/CoreELEC/build.CoreELEC-Amlogic-ng.arm-19/.threads/logs/4.log

>>> m4:host seq 4 >>>

<<< autoconf-archive:host seq 6 <<<

Display More

Any idea about the problem?

By the way... should I use the new patch ( https://www.linuxsat-support.c…2-libdvbcsa-v2-patch-zip/ ) or the 1st one?

Kind regards

Display More

I updated it, but I didn't test it...

GitHub workflow for CoreELEC.zip

#########################

I removed action-automatic-releases, it's deprecated and warnings appear after github actions

Node.js 12 actions are deprecated. For more information see: https://github.blog/changelog/2022-09-22-github-actions-all-actions-will-begin-running-on-node16-instead-of-node12/. Please update the following actions to use Node.js 16: marvinpinto/action-automatic-releases

#########################

(you can download the completed target files at the bottom of the github operations webpage)

I'll keep an eye on the github workflow...

Quote from Chris230291

OK thanks.

So for it to actually get saved to ncam.server I first need to edit /save each working line manually?

If you want to save it, or if you don't, then don't.

recommended for free servers: cccam_cfg_save = 0

Quote from Chris230291

What is cccam_cfg_save = 1 supposed to do?

If cccam_cfg_save = 1 and you add a line to the CCcam.cfg file, you can change it and save it at htxp://ip:8181/readers.html which will also be included in the ncam.server configuration file...

Remove libdvbcsa. sudo apt-get purge libdvbcsa*

(build it yourself...)

I statically added it to tvh.deb...

Quote from suppenkasper0815

Quote from Tourt

My thanks go out to =[M.I.T.M]=

I made it It was a daily project, but it's running now.

First an update to Debian Bullseye from Buster. Then noticed that PHP was updated from 7.3 to 7.4, so other systems were no longer running ( Nextcloud ).

That was then repaired and it could finally start.

Code

sudo mkdir /var/tmp/tvheadend
sudo mkdir /var/tmp/libdvbcsa

I downloaded the 2 patches HERE and pushed them into the tmp directory. Adjusted rights.

Code

cd /var/tmp/libdvcsa

Git wanted to be installed:

Code

sudo apt-get install git-all

Then like =[M.I.T.M]= starting with this:

Code

sudo git clone https://github.com/glenvt18/libdvbcsa
cd libdvbcsa
sudo git config apply.whitespace nowarn
sudo git apply libdvbcsa.patch
./bootstrap
./configure
sudo make
sudo apt-get purge libdvbcsa-dev
sudo make install

Error

Make and Automake were not installed. So:

Code

sudo apt-get install make automake

Again:

Code

./bootstrap

That worked!

Continue with:

Code

sudo apt autoremove -y
sudo apt-get purge libdvbcsa1*

removed all the legacy stuff from Debian Buster and also removed the old TVHeadend (you should backup the .hts directories beforehand if you want to).

Then continue with the instructions of =[M.I.T.M]=

Code

sudo git clone https://github.com/tvheadend/tvheadend.git /var/tmp/tvheadend
cd /var/tmp/tvheadend
sudo git config apply.whitespace nowarn
sudo git apply /var/tmp/tvheadend/tvheadend43.patch
sudo./configure --disable-ffmpeg_static --disable-libfdkaac_static --disable-libtheora_static --disable-libopus_static --disable-libvorbis_static --disable-libvpx_static --disable-libx264_static --disable-libx265_static --disable-libfdkaac - -enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --disable-avahi --disable-dbus_1 --disable-bintray_cache --disable-execinfo --disable-hdhomerun_static - -disable-hdhomerun_client --disable-libav --enable-pngquant --enable-trace --enable-vaapi --infodir=/usr/share/info --localstatedir=/var --mandir=/usr/share/man --prefix=/usr --cc=cc --arch=x86_x64 --platform=linux --python=python3 --sysconfdir=/config
sudo make -j$(nproc)

A lot of things come up here. On the one hand I had to install libtools and others because of missing dependencies.

Also, I chose the

Code

-disable-libav option instead of -enable-libav. 

Otherwise there was another error. Then the test run with

Code

./build.linux/tvheadend –noacl

It worked!

Then the Autobuild.sh adjusted according to the specifications of =[M.I.T.M]=

Code

cd /var/tmp/tvheadend/Autobuild
sudo nano debian.sh
add argument '-d' to dpkg-buildpackage to remove libdvbcsa-dev dependancy: dpkg-buildpackage -d -b -us -uc
save debian.sh
sudo AUTOBUILD_CONFIGURE_EXTRA="--disable-ffmpeg_static --disable-libfdkaac_static --disable-libtheora_static --disable-libopus_static --disable-libvorbis_static --disable-libvpx_static --disable-libx264_static --disable-libx265_static --disable-libfdkaac - -enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --disable-avahi --disable-dbus_1 --disable-bintray_cache --disable-execinfo --disable-hdhomerun_static - -disable-hdhomerun_client --disable-libav --enable-pngquant --enable-trace --enable-vaapi --infodir=/usr/share/info --localstatedir=/var --mandir=/usr/share/man --prefix=/usr --cc=cc --arch=x86_x64 --platform=linux --python=python3 --sysconfdir=/config" ./Autobuild.sh -j$(nproc)

Again, disable libav.

Nevertheless, no autobuild came about. Until I figured out what was missing. So I installed

Code

sudo apt-get install debhelper liburiparser-dev libpcre2-dev libpcre3-dev

That's it, the package is created and can be installed via:

Code

cd /var/tmp
sudo dpkg -i tvheadend………

Finally, I can say that the SAT>IP server runs on TVHeadend and works just as well as the VLC stream.

Oh, and I didn't touch the existing OSCAM!

PS: I hope I have thought of everything.

PPS: Since I didn't give myself superuser rights beforehand, everything only worked with sudo.

Display More

Hey guys,

great work and instruction.

Unfortunately I have still trouble with compiling TVH myself with that instruction.

Here is my output: https://pastebin.com/iNrnSHkC

It seems like I have troube with libav, ffmpeg and libdrm.

My system is Ubuntu 16.04 with ESM-Support and all updated packages.

I just think the environment is not the easiest. Is there maybe a workaround to use standard tvh or that the patch will be implemented in the native tvh code?

Is it maybe possible to cross-compile on my newer machine and put it back to my ubuntu 16.04 server?

Display More

Quote

line 114: checking for pkg libva >=0.38.0 ... fail (detected <none>)

libva-dev is not installed...

(tvheadend_4.3-2070~g2beb6c9-dirty~xenial_amd64.deb)

Quote from c1rca

Quote from oastra

So , I test it on my Pi4 with Libreelec :

I install Libreelec 10.0.3

Install tvheadend and oscam from repo

Change tvheadent.bin with version from here: tvheadend43-19.5.102.rar

Change oscam.bin with version from here: oscam-11715-798

I test it with a Sundtek USB Tuner and it works with Icam

Display More

I do the same but i don't see icam channels when i adding icam channel list. Do I need a special one for tvheadend?

Display More

LibreELEC (Matrix) 10.0.3 TVH (arm) addons RPi2.zip RPi4.zip

Quote from Chris230291

I wonder if someone can help me? Until now I have used ncam exclusively for powervu afn.

Today I tried to add free servers. The servers get grabbed from cccam.cfg and connect fine. However they do no work for me and I just get rejected group errors.

The same lines work in oscam when added like this.

Code

[reader] 
label = name
protocol = cccam
device = ip,port
group = 1
dropbadcws = 1
cacheex_block_fakecws = 1
user = user
password = password
ccckeepalive = 1

Here are my ncam files.

ncam.conf

Code

[global]
disablelog                    = 1
logfile                       = /tmp/ncam.log
nice                          = -20
disablecrccws                 = 1
cccam_cfg_save                = 1
cccam_cfg_repetitions_forced  = 1
cccam_cfg_reconnect_delay     = 90
cccam_cfg_reconnect_attempts  = 10

[cache]

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
request_mode                  = 1
listen_port                   = 9001
delayer                       = 60
user                          = tvheadend
read_sdt                      = 1
write_sdt_prov                = 1
extended_cw_api               = 1
boxtype                       = pc

[webif]
httpport                      = 8888
httpallowed                   = 10.0.1.1-255.255.255.255

Display More

user.conf

Code

[account]
user                          = tvheadend
pwd                           = tvheadend
monlevel                      = 4
au                            = 1
group                         = 1,2,3,4,5,6,7,8,9,10,64
max_connections               = 99

I have no real cards and use only free servers. Can anyone tell whats going on?

Display More

If you disable Loadbalance, you will see why you get rejected group errors "because not found".

ncam.conf:

[global]
...
lb_mode                       = 0
...

2023-01-07 09-15-12.png

Quote from macchese2

Quote from fegol

Quote from macchese2

Hi all. I wanted to try to make the icam work on TVheadend 4.2.8-36, but I can't do it. I have TVH installed on a Rockpi x (card similar to Raspberry but X86) with Ubuntu 20.04LTS. Like video cards I use 2 TBS. Thanks

maybe, tvheadend_4.3-2063~gd88549603-dirty~focal_arm64.deb

It'n not for my RockPI...It's X86,not ARM.Do you have for X86?

Sorry, I overlooked X, so I guessed arm64...

(https://wiki.radxa.com/RockpiX)

But I managed to build it on x86_64: tvheadend_4.3-2063~gd88549603-dirty~focal_amd64.deb

Quote from macchese2

Hi all. I wanted to try to make the icam work on TVheadend 4.2.8-36, but I can't do it. I have TVH installed on a Rockpi x (card similar to Raspberry but X86) with Ubuntu 20.04LTS. Like video cards I use 2 TBS. Thanks

maybe, tvheadend_4.3-2063~gd88549603-dirty~focal_arm64.deb

Quote from frake50

fegol

after i ported the DVB driver.. i tested yours android tvheadend binary , it catch the DVB and config it.. but when force scan networks astra .. the muxes just 2 channel catched.. all muxes fail error... i compare the Freq of them... they are looking different when i use tvheadend with kodi..

did the data base old ... or somethings went wrong at compile... thanks again.. and happy new years to all.

I only have android on a mobile device and I tested it on...

1.png 2.png

3.png 4.png

5.png 7.png

I'm not saying it's 100% perfect, but it works somewhat.

Quote from zainkamal

but i want it for coreelec 9.2.8 for this service.tvheadend43-ns-9.2.cd8491a.zip

Among the many options, I have no idea whether I managed to insert the frontend.h file in the right place.

service.tvheadend43-ns-9.2.cd8491a.zip