Which one is in the partition 1?
Posts by gorski
-
-
I flashed my H7 (the same OEM box) 2 days ago, online, "flash on the fly" method, from one partition into the other, PurE2 v. 6.5 - no problem...
Which image did you use in each case and which procedure?
USB method is to put an image into an existing partition, without erasing everything, in that case...
1) Download a latest release version of your chosen (favourite) firmware image directly from the developers website.
ax51-PurE2-6.5-20201028_usb.zip
2) When the file has downloaded and been saved to your computer - unzip it.
You will then have a file named [zgemma]. (Inside that folder you should have another folder named [H7] ).If you want you can rename a file "noforce" to "force", just in case...
a) Copy the full folder named [zgemma] to a freshly formatted (FAT32) USB key.
3) Turn off your H7 receiver with the white button, at the rear next to power input.
4) Plug in your USB key with the zgemma folder on it (any USB port should be OK).
5) Behind the front flap (door panel) you will see a small button to the top left hand side.
Hold this button down (push in) whilst turning on the rear white power push button.
Keep the front button pushed in and on the front LCD panel you will see the display change from BOOT> USB> FLASH.
When FLASH is displayed you can remove your finger from the from button.
The receiver will now remain displaying FLASH (approx 2minutes) whilst the new firmware is loaded onto your receiver.
6) The box will then restart itself showing BOOT on the front screen. [00>100]
6a) It might stop at 49% and you will see the Wizard at that point, so follow the on-screen steps from then on => when you are finished it will boot fully!
7) Alternatively to 6a) - if it does go to 100 - you could then see the installation Wizard on the TV screen, which will run you through the set-up process.
Special note – If you save your settings to your internal hard disk (HDD) or USB stick, if one is fitted, during the Wizard run you will get the option to import/restore your previous settings and bouquets, which should work in many instances, when changes between the 2 images are not too great and so this feature will cut short the setting up of your Zgemma H7 STB considerably. -
If all else fails, you can use PURE2 RECOVERY IMAGE v. 6.5 - it will
-erase everything on your flash and then
-create partitions and after that it will
-put in the latest image on the first partition....
Good luck!
The general tutorial is here: Flash your Zgemma H7x using RECOVERY and/or USB files
-
Delfi says:
"v. 6.5 is getting a refresh
Edision 4K, new linux kernel 5.9, drivers
Uclan, some changes to kernel
etc...." -
Aha, as I suspected - there is a HW difference... Similar to my old F500HD, I guess...
Yep, it will work fine in a new, stronger box, not to worry!
Surfshark is the EASIEST to set up, for sure!
And unlimited devices... so for me... ;)
-
I would say it's your HW, not enough firepower, so there is nothing you can do...
But numsy, a few posts above yours, says it is working fine in his H2, so go figure...
In my old DB500HD I had similar problems...
Ergo not sure what's up with yours... LAN or WLAN?
Buy a better, stronger, newer STB and you won't know you are using VPN.
Zgemma H7 is still the best IMO, H9 Combo/Twin are cool, too. Edision OS mio 4K+, then some Dinobots, like 8008 etc.
Zgemma H10 with dual OS is coming but we do not know how it will function as of now, of course....
-
Zavisi sto ti treba.
Zgemma H7 je najbolja, po mom sudu.
H9S moze proci, ali su bolji H9 Combo ili Twin. Uskoro stize H10, sa dual OS (Android i E2).
Ima i drugih dobrih receivera, kao Edision OS mio 4K+ ili neki Dinobotovi i sl. Na pr. 8008 i jos poneki.
Ako imas dovoljno jak HW, onda Kodi ide i u njemu imas addon zvani Live TV Serbia, a i Nickeov, takodjer. Potrazi.
Tamo ima dosta toga sa nasih prostora... Besplatno je, ali ne i savrseno... Ovisi sto ti treba. Mozes dodatno ubaciti liste IPTV kanala sa Balkana u njega i u E2 direktno.
Cak imas neki broj kanala koji rade tako iz "obicne" liste kanala za E2. Po mom sudu Ciefpova je lista najbolja i sadrzava dosta takvih sadrzaja, sama po sebi, pa sad kako cije potrebe...
-
Imas niz poruka ovdje na forumu, koji ti daje ideju da mnoge funkcije rade sa mini USB wireless tastaturom... ;) Ali ne u svakom STBu!
-
-
'Cept, it doesn't work in my case, hence xml.... But OK...
-
Several obvious Qs...
1) Is your LNB:
-single LNB (one cable coming out of it)
-Twin or dual LNB (2 cables coming into the house)
-QUAD or Quattro LNB (4 cables coming out of it)?
2) Do you have a cable in each DVB/S tuners or just one (and you are moving it around)?
3) Try redoing the connector at both ends, just in case, on all cables.
4) Unplug all other USB devices from your Zgemma H7.
5) Try a different LNB with which it worked before.
6) Scanning doesn't have to be blind, if you have a good xml with all the TPs.
7) Did you try using a professional to set it up? They usually have instruments to remove the obvious obstacles...
Good luck!
-
1) How to make our Estuary full HD skin do as you please...
2) MENU > Setup > System > Video settings > choose according to your HW...
3) MENU > Setup > System > Channel selection settings >
> 2nd page > Show picons in sevice list (if you want it - try various settings)
and/or
> 3rd page > Show columns to 200 - 375 or so pixels wide - try it...
PurE2 has many possibilities, so you are in control, as much as Humanly possible...
-
That's why I prefer Satellite TV... ;)
-
Working as of this moment...
STREAMING FNC PLUGINS:
Radio
HbbTV - it doesn't work in all STBs, it is demanding...
Streamlord
StreamlordTV
Lookmovies
Lookseries
Filmler (Turkish plugin, so use Balkanic IP address, i.e. use VPN if you are elsewhere in the world)
xHamster
OLM is back, too
YIFY is all sorted out now, including all the search engines!
INFORMATION and other NON-STREAMING FNC PLUGINS
Live-Score
Speedtest
IMDb is fine again
Bitrate
WAZZup
Vicevi (Serbo-Croat language)
At the moment, these STREAMING FNC plugins are SOMETIMES/IN SOME CASES NOT working:
Iwaatch - it seems it is working in some machines and in some countries (but not so at my UK end, in Zgemma H9 Twin)
A NOTE:
One only needs KUD for Live Score plugin, all the rest of them are opened to highest quality without KUD, thanx to Franc.
Speaking of Franc: he has very little time these days to immediately update the FNC plugins, so we must be patient if something is no longer functional....
P.S. I don't use Filme or Serien, sorry... (They tell me they are OK, too... :) )
P.P.S. Do not forget to use VPN with streaming plugins - PROTECT YOURSELVES!!!
================================================================================
One more thing: after installing PurE2, I would spend some time going through all FNC plugins and setting them up properly, so everything works smoothly...
What does that mean precisely?
Firstly, set up your external (USB or mSD) and/or internal (SATA) devices properly, as described here: Mounting devices/partitions in PurE2's Device Manager and which files to send where!
Once you do that you can send various FNC bits to the right place, i.e. where you see fit/best for your setup.
As in:
FNC Favourites
FNC Backup (I send both of these to the same folder)
Subtitles
Downloading (in YIFY, for instance) to EXT4 formatted device designated for recording (/media/hdd at my end)
And so on...
Here are example screenshots to make it obvious:
PURE2 STB > RCU > MENU > PurE2 FNC Plugins > Streamlord > MENU >
linuxsat-support.com/cms/attachment/155387/
linuxsat-support.com/cms/attachment/155388/linuxsat-support.com/cms/attachment/155389/
This is what my media/hdd and then /media/usb folders look like:
linuxsat-support.com/cms/attachment/155395/
Then, everything in PurE2 - purrs... :rasta2bigsmoke0gf1:
-
Fabulous FNC plugins by Franc (for PurE2 users)!!! - general thread to help with FNC plugins...
Currently, FNC plugins: Fabulous FNC plugins by Franc (for PurE2 users)!!!
-
The answer is here: http://www.pur-e2.club/OU/imag…x.php?dir=6.5/airdigital/
ZGEMMA-README-MIPS.me document states the following:
QuoteDisplay MoreFOR:
Zgemma H2H
Zgemma H2S
Zgemma H2H
Zgemma H32tc
image zgemmah2h should be just fine
FOR:
Zgemma H5
Zgemma H5s
Zgemma H5splus
image zgemmah52s should be just fine
So, try and come back to give us some feedback, please...
For H2 series use this PurE2 v. 6.5 image: zgemmah2h-PurE2-6.5-20201018_usb.zip
Read the STICKIES here to help you set it up PROPERLY, please.. ;)
-
If you need extra help with PurE2 - it's here, in some detail:
Mounting devices/partitions in PurE2's Device Manager and which files to send where!
Generally speaking, no other image has this kind of support - I made sure everything you need is in PurE2 section, read at least the top, Sticky threads: PurE2 Image Team
-
Cool!
Do as you read and it will pan out - hopefully there are no bad drivers in the mix...
Just be patient, don't cut corners, no shortcuts, be disciplined and hopefully your PurE2 will purr.... :)
-
Wait for Zgemma H10 - I have a feeling at least E2 will be good in it... ;)
-
OK, you have your own thread, as AZ HD 61 is a new beast that needs checking out, I guess...
For starters, we need to start from complete 0!!!
To redo it al from real scratch see this thread, please:
Flash your Zgemma H7x using RECOVERY and/or USB files
Different box, the same principle...
FYI, also this one: Flashing, backup and restore settings on Zgemma H9 series => the bit for multiboot boxes, Combo/Twin!
Use this image for starters: http://www.pur-e2.club/OU/imag….php?dir=6.5/ax/Recovery/
Direct DL is here: ax61-PurE2-6.5-20200605_recovery_emmc.zip
Put it in a USB stick and do as described earlier...
=========================================
After that, please check out this one: Mounting devices/partitions in PurE2's Device Manager and which files to send where!
When you do that, then check this out: How to make our Estuary full HD skin do as you please...
Next should be this: Fabulous FNC plugins by Franc (for PurE2 users)!!!
Now you should have a well structured image on your box...
Let's take it from there....
EDIT: I forgot to mention CCcam - it's rubbish on HiSil...
Study this and you will be singing: OSCam Emu Config Mario for all PV providers
