I ll leave it for now, was interested in the actual installation process rather than the image itself.
Posts by frank087234
-
-
Code
mint@mint:~$ ./openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh 192.168.0.157 root dreambox recoding data (be patient)... done. verifying local... image 'openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.nfi' found. verifying remote '192.168.0.157'... on line. verifying remote path '/media/hdd'... not found! mint@mint:~$ echo $? 127 mint@mint:~$not sure whats wrong , password is dreambox
-
if password of your box is "dreambox", command that you've writed was incorrect.
the correct command is:
Codemint@mint:~$ ./openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh 192.168.0.157 root dreamboxthe term rootpassword in installation notes must be substituted by "root password of your dm800se".
Same problem
Code
Display Moredevtmpfs 67852 4 67848 0% /dev /dev/sdb6 6667650 5794544 517369 92% /media/ba tmpfs 64 0 64 0% /media tmpfs 67960 192 67768 0% /run tmpfs 67960 656 67304 1% /var/volatile /dev/sdb3 2815104 2584896 87208 97% /media/sdb3 /dev/sda1 93684768 27721680 61131232 31% /media/hdd /dev/sdb3 2815104 2584896 87208 97% /media/usb /dev/sdb6 6667650 5794544 517369 92% /media/ba /dev/sdb2 959699 257918 650581 28% /media/sdb2 /dev/sdb5 491364 274258 190892 59% /media/sdb5 /dev/sdb7 659243 393492 230577 63% /media/sdb7 /dev/sdb8 2580510 1663704 779130 68% /media/sdb8 /dev/sdb2 959699 257918 650581 28% /media/BH /dev/sdb5 491364 274258 190892 59% /media/Oatv /dev/sdb8 2580510 1663704 779130 68% /media/mboot root@dm800se:~# exit logout Connection closed by foreign host. mint@mint:~$ unzip openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip Archive: openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip inflating: openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh replace !!!!README!!!!? [y]es, [n]o, [A]ll, [N]one, [r]ename: y inflating: !!!!README!!!! mint@mint:~$ ./openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh 192.168.0.157 root dreambox recoding data (be patient)... done. verifying local... image 'openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.nfi' found. verifying remote '192.168.0.157'... on line. verifying remote path '/media/hdd'... not found! -
Marker Id returned from flash:0 does not match
I fix brand new chip samsung K9F2G08U0C is green connected in jtag but cant flash bootloader..its genuine solo2 ..any suggestions?did you fix your solo2 ??
hi..it was more boxes i fix after..what is your problem?
No problem at the moment, my box is sunray solo2.
-
-
Code
mint@mint:~$ ./openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh 192.168.0.157 root rootpassword dreambox recoding data (be patient)... done. verifying local... image 'openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.nfi' found. verifying remote '192.168.0.157'... on line. verifying remote path '/media/hdd'... not found! mint@mint:~$hdd is mounted!!!
-
But you said to put dreambox ip address? If not the case, what ip address should I use? I ll try install uudecode anyhow. I am using Linux USB bootable pc.
Thank you bartoma55
-
Gives error in last step.
from your photos, seems that you're installing directly on dreambox.
in installation notes we said:
Codein the example, let's assume that dm800se has the IP address 192.168.1.135 and that you are in a bash command line of your Linux PC, in an appropriate directory:you mast do installation from unix/linux pc bash capable, not directly from box.
-
Marker Id returned from flash:0 does not match
I fix brand new chip samsung K9F2G08U0C is green connected in jtag but cant flash bootloader..its genuine solo2 ..any suggestions?did you fix your solo2 ??
-
it's very very Complicated
breathing is also complicated ... but you are alive ...
Gives error in last step.
-
The egami boot button, not working. If you can fix it parageria
-
it boots fine BA.
-
This plugin has become just a porn hub ..
-
What's the name of water proof, heat resistant tape used around satellite cable / connector coaxial with LNB.?
-
OLM fnc crash
Code
Display More18:53:03.2694 [ E ] gdi/gpixmap.cpp:216 gSurface [gSurface] ERROR: accelAlloc failed 18:53:03.3437 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1 18:53:03.3494 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:03+0100 [-] KEY: 103 1 18:53:05.2870 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1 18:53:05.2926 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:05+0100 [-] KEY: 352 0 18:53:05.2978 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:05+0100 [-] [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'. 18:53:05.3226 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:05+0100 [-] [Screen] Showing screen 'FNCMessage'. 18:53:07.0490 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:07+0100 [-] [Skin] Parsing embedded skin '<embedded-in-FNCMessage>'. 18:53:07.0574 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:07+0100 [-] [Skin] Processing screen '<embedded-in-FNCMessage>', position=(603, 452), size=(714 x 175) for module 'FNCMessage'. 18:53:07.0918 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:07+0100 [-] [Skin] Processing screen 'FNColmStreamQuality', position=(0, 0), size=(1920 x 1080) for module 'FNColmStreamQuality'. 18:53:07.1600 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:07+0100 [-] [AVSwitch] reading edid modes failed, using all modes 18:53:07.1660 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:07+0100 [-] [AVSwitch] reading _preferred modes: ['pal', '576i', '1080i', '720p', '480p', '1080i50', '1080p24', '1080p25', '1080p30', '720p50', '576p', '640x480', '800x600', '1024x768'] 18:53:07.2100 [ ] gdi/picload.cpp:1339 setPara [ePicLoad] setPara max-X=35 max-Y=35 aspect_ratio=1.000000 cache=1 resize=1 bg=#FF000000 18:53:09.2688 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:09+0100 [-] ERROR:root:"https://soap2day.to/" returned an error. Could not collect tokens. 18:53:09.2766 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:09+0100 [-] [Screen] Showing screen 'FNColm'. 18:53:09.2902 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2020-12-17 18:53:09+0100 [-] cloudscraper.exceptions.CloudflareChallengeError: Detected a Cloudflare version 2 challenge, This feature is not available in the opensource (free) version. 18:53:09.2913 [ E ] python/python.cpp:210 call [ePyObject] (PyObject_CallObject(<bound method FNColm.play1 of <class 'main.FNColm'>>,()) failed) -
can you make a new image with latest upgrade..
upgrading online is not always successful, with nearly 390 files to update !!!
-
-
OpenSPA 7 work, bh4.4 not working
why do you put pictures upside down !!!!!
ATTACH CRASH LOG
-
there is problem with opdboot, if you choose boot with boot manager , it will NOT boot any more ...
-
Display More
Ymovies works only with links in videos section, not from mirrors links. Because of that some movies in some section they do not open
with message "No videos were found for this title"
https://ymovies.se/film/tenki-no-ko-86342/watching/
For Youtube replace these two files in attach.
Libs - youtube_dl - extractor - youtube.py
Libs - youtubeparser.py
No problem with stops sound playing. Here is also the latest version of tsiplayer.
it gives invalid decrypt signature when try play clip (Pure6.5)
