Posts by IamMattM

  • CI+ Helper

    Quote from fpignon

    I've been unable to get my Fransat Neotion CI+ 1.3 CAM working. In the end it doesn’t really matter, since I’m watching the French channels in clear through the PLS Gold streams. Still, the level of receiver hardening that blocks even official CAMs is absurd. It only pushes users toward IPTV instead of satellite. What a waste!

    Thanks. Also now using Multi stream and working just like before. Makes you wonder why bother with the PC7 card or even CAM. I might sell those now.

  • carte fransat prob ncam /oscam

    Quote from aigle74

    hello I am looking for a complete config for FRANSAT 5W I am ready to pay, I have a V7 card with an ultimo 4K thank you in advance

    aigle74

    Isn't your Ultimo 4K already fitted with a     DVB-S2X FBC tuner module (specifically the 45308X chipset) ? If so then supposedly you can get TNT channels using multistream as I have just found out. Everything working again perfectly and without a need for any cards/oscam at all.

  • CAM Fransat CI+ 1.3

    Merci pout le site. Incroyable...Je vous remercie.


    EnoSat :Un grand MERCI ! Tout marche une fois de plus. Je n'avais aucune idee que ce multistream etait possible et encore moins que Gemini hallucinait completement hors la plaque !!!

    Je vais pouvoir regarder Koh-LAnta depuis le lit :-)

  • CAM Fransat CI+ 1.3

    jose luis y
    lorrain

    Pas moyen d'avoir un lock (reste a 0%) pour multistream ...


    Frequency 11509,
    Polarization Horizontal,
    Symbol Rate 29500,
    Modulation 8PSK,
    FEC 8/9.

    Multistream Yes,
    Stream ID 1,
    PLS Mode Root,
    PLS Code 176439.


    C'est les bons parametres ?


    Pourtant le signal est "bon" , Fransat France3 SNR 87% ...
    Meme le "fine movement" ne me donne rien...je desespere. Pourriez vous m'indiquer vos parametres que je sois sur de ca au moins avant de considerer realigner la parabole ? MErci.

  • carte fransat prob ncam /oscam

    Quote from rubeneo

    Just out of curiosity, in case anyone knows, what exactly was the update? I have a Fransat Strong receiver, it's been updated and now the channels are working again, but not on Vu+ with Oscam. Is it a change to AESKEY or something else?

    I think either the AES or DES key...It sounds like Multistream if supported by your Vu+ hardware is a way forward and no keys needed. I certainly will be doing this workaround on my Vuduo4KSE, so that I can once more watch TNT channels remotely and not be bound by the location of my LG TV.

  • CAM Fransat CI+ 1.3

    Multi stream ? Qu'est ce que c'est ? Les chaînes Fransat sont visibles sur enigma2 ? Comment ça marche ?

    Edit: Just found out what you meant. Fantastic !
    Got all the info I needed through Gemini.

    THank you for pointing me in this direction. Much appreciated.

  • CAM Fransat CI+ 1.3

    Merci. Pareil pour moi.
    La CAM Neotion est bien detectee dans mon Vuduo4Kse, mais me dit qu'il y a erreur CIPlus (Votre equipement est revoque et ne peut plus etre utilise avec le module Fransat insere")
    Elle continue a bien marcher dans mon televiseur LG.
    Quelle contrainte cette nouvelle mesure de securite.

  • carte fransat prob ncam /oscam

    This is what Gemini AI tells me:

    "Your log Detected /dev/dvb/adapter0/demux0 Api: 0 is the primary reason the picture isn't showing.
    Api: 0     is an old protocol that often cannot handle the 16-byte "Long CW" generated by your card. Modern VU+ 4K boxes usually require Api: 3."

    "Since pmt_mode = 6 didn't force it to change, it indicates your OSCam-Emu version 802 is too old or patched specifically for Stream Relay (iCam), which can break local card descrambling on 4K ARM hardware."

    "Your log shows OSCam-Emu version 802. This version is quite old and often hard-coded for older DVB-API versions (Api: 0). For a VU+ Duo 4K SE to properly "see" 16-byte Fransat keys on the screen, you typically need a modern binary (Version 117xx or 118xx) that correctly triggers Api: 3."

  • CI+ Helper

    Quote from fpignon

    Hello!

    I'm trying to use a FRANSAT NEOTION CAM CI+ 1.3 on my VU+ DUO 4K SE with OpenPli 9. I've installed enigma2-plugin-extensions-ci_plus_helper-openpli8.x_4_all.ipk. The module is detected and authenticated and I could get one channel decrypted and then, once I switched to another channel, I only got black screen and various error messages (revoked xxx, not certfifed CI+ receiver...etc). Is this version of ci_plus_helper really usable on OpenPli 9? ChatGPT tells me that I should rather use another image (VTI or OpenATV) but I've been using OpenPli for years and I like it. Thanks for your feedback!

    fpignon , piterfree
    Did you manage to get the Fransat Neotion CI+ 1.3 CAM working in the end in your VuDuo4K SE ? I have openATV 7.6 with <enigma2-plugin-systemplugins-ciplushelper - 5.8-r2> and would like to know if I can at least use it ?
    The CAM works fine off my LG TV but it is not convenient as I often remotely watch off my Vuduo4KSE.

  • carte fransat prob ncam /oscam

    popo40
    until061

    Have you got a solution to this matter since the 27th April 2026 ?

    Not sure if I should be getting more than just a black screen as I see Nano98 and ecms:

  • carte fransat prob ncam /oscam

    I had intended to use the new PCMCIA module with my current PC7 card.

    I run a Vu+ Duo4K SE , openATV 7.3 includding <ciplushelper>

    I note that this post indicates some problems ?
    CAM Fransat CI+ 1.3

  • Sky UK. White card. Entitlements updating

    Quote from Chris230291

    I understand the setting but I have enabled saving so I can write it manually if it ever comes.


    I guess I just need to wait a long time and hope then are still updating expired cards.

    What will happen if it does get updated? Or do we not know until it happens?

    Chris230291

    Did you ever receive the unique EMM for your white card S/No in the end ?

    My card entitlements all expired last November - Not too sure if there is hope to have them renewing.
    London Live does clear with any entitlements.

    pasted-from-clipboard.png

  • Sky UK. White card. Entitlements updating

    Chris230291

    Thanks. I revisited the issue and the only problem that I was facing that was my OSCAM had not compiled in the SMARGO support.

    I got a new OSCAM binary to replace my current one, and the SMARGO reader now reads the 0963 white card with no problems (so it was not fw reader issue after all)

  • Sky UK. White card. Entitlements updating

    Quote from Chris230291

    This is my working reader config:

    I was never able to update the firmware/modify settings.

  • Sky UK. White card. Entitlements updating

    Chris230291

    I understand from this thread that you are using a smargo usb reader successfully in order to read the sly white card 0963 in a linux pc x86 environment.

    I am trying to do the same with a 0963 card that is detected ok but only in using the internal reader of a vuduo4k (enigma2)=> card is detected and clears London Live.


    That same 0963 card is ERROR'ing when used in the smargo that I have recently acquired.
    For testing, a different provider card is detected OK in the smargo.


    I don't suppose that you would have the details of the smargo f/w (1.3?) in use, and its the mode/frequency used (srp_tools_x86) .
    https://www.lonasdigital.com/t…n-oscam.65563/post-388581

    I was thinking that perhaps there is a particular set of mhz/card_mhz/smargo frequencies that would work with such a card...