The date of the entitlements will change to about 6-8 weeks in advance.
It is only the unique EMM that does that.
The global EMMs only make hidden changes to the card like the internal date.
The date of the entitlements will change to about 6-8 weeks in advance.
It is only the unique EMM that does that.
The global EMMs only make hidden changes to the card like the internal date.
Chris230291
I understand from this thread that you are using a smargo usb reader successfully in order to read the sly white card 0963 in a linux pc x86 environment.
I am trying to do the same with a 0963 card that is detected ok but only in using the internal reader of a vuduo4k (enigma2)=> card is detected and clears London Live.
That same 0963 card is ERROR'ing when used in the smargo that I have recently acquired.
For testing, a different provider card is detected OK in the smargo.
I don't suppose that you would have the details of the smargo f/w (1.3?) in use, and its the mode/frequency used (srp_tools_x86) .
https://www.lonasdigital.com/t…n-oscam.65563/post-388581
I was thinking that perhaps there is a particular set of mhz/card_mhz/smargo frequencies that would work with such a card...
This is my working reader config:
[reader]
label = sky_uk
protocol = smargo
device = /dev/ttyUSB0
autospeed = 0
caid = 0963
detect = cd
mhz = 369
cardmhz = 369
group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
audisabled = 1
Display More
I was never able to update the firmware/modify settings.
This is my working reader config:
CodeDisplay More[reader] label = sky_uk protocol = smargo device = /dev/ttyUSB0 autospeed = 0 caid = 0963 detect = cd mhz = 369 cardmhz = 369 group = 2 emmcache = 1,3,2,0 blockemm-unknown = 1 blockemm-u = 1 blockemm-s = 1 blockemm-g = 1 audisabled = 1I was never able to update the firmware/modify settings.
Chris230291
Thanks. I revisited the issue and the only problem that I was facing that was my OSCAM had not compiled in the SMARGO support.
I got a new OSCAM binary to replace my current one, and the SMARGO reader now reads the 0963 white card with no problems (so it was not fw reader issue after all)
I understand the setting but I have enabled saving so I can write it manually if it ever comes.
I guess I just need to wait a long time and hope then are still updating expired cards.
What will happen if it does get updated? Or do we not know until it happens?
Chris230291
Did you ever receive the unique EMM for your white card S/No in the end ?
My card entitlements all expired last November - Not too sure if there is hope to have them renewing.
London Live does clear with any entitlements.
pasted-from-clipboard.png
No, I replaced those cards with one that had a few years of entitlements already on it.
No, I replaced those cards with one that had a few years of entitlements already on it.
Chris230291 : I have seen people with 7+ years of active entitlements - How is that even possible ?
Are those cards the old FreeSatForSky FsFs ones ?
See here: https://www.sat-universe.com/i…on.318591/post-2037194371
It's my understanding that some cards were manufactured wrong, or an emm update applied too much time. Not really sure.
![]()
Don’t have an account yet? Register yourself now and be a part of our community!