Posts by pinokio0

Levi45, do you have NCam_15.8.sh?

Quote from Pawel Pawelek

Quote from M.Sulak

Is there a .deb file available for DreamOS?

Unfortunately, a .deb package for DreamOS is not available at this time. The reason is that I do not currently have a DreamOS device on hand to conduct proper builds and testing.

As of now, the plugin is primarily developed and tested for OpenAlliance-based images (using .ipk packages). Should I gain access to the necessary hardware for DreamOS testing in the future, I will certainly post an update regarding compatibility.

I'm sending you a Dreambox two.

Quote from Virus 2095

Have you tried through the software manager on the box itself I have had strange errors over terminal before then when I have executed the same commend through the software manager it has worked. I know this seems strange as you would think you would get the same output however in my experience i have had this happen before as well.

You go to the usr/camscript folder and remove Ncam14.2 and replace it with Ncam 15.7.

I tried to install my channels on E-Channelizer but it doesn't show them on the Dreambox Two without EPG. When I put the EPG on, it shows them. As far as I remember, I was able to add channels without EPG to my favorites list before, or am I doing something wrong.

Quote from Pawel Pawelek

AIO Panel 9.2 (.deb) for DreamOS – Ready for Testing!

I’ve prepared a new version of AIO Panel 9.2, specifically built for Dreambox receivers (.deb format).

Since I don't currently have a DreamOS device on hand, I haven't been able to "battle-test" this package myself. If any of you have a spare moment to try it out, I’d really appreciate your feedback on whether everything is running smoothly.

In case of any issues, please provide:

• System logs.
• A brief description of when/where the error occurs.

Thanks for your help! Cheers!

When you press Plugin Panel AIO it says to wait but nothing happens. I don't know how long you have to wait, but nothing opens for now.

Dreambox two Gemini 4.20

Quote from hakhan

Quote from pinokio0

Quote from hakhan

Quote from levi45

Quote from hakhan

Hi Levi, I'm installing NCam v15.7-r0 ipk, but even though the installation is complete, Multicam Manager doesn't appear for some reason.

please look this my post

Post

RE: Levi45 Multicam Manager

(Quote from pabloweb)

So this is for levi45 multicam manager only . I have checked and find the issue @fairbird didn't named/change script correctly ,hopefully he will se this post and correct it in next release. But for now first delete any ncam script in the /usr/camscript/ direction then, send this script to /usr/camscript/ and give permission 755 then restart NCam_15.7 via levi45 multicam manager it should work fine . Also i add im very impressed with ncam well done @fairbird…

levi45

Feb 21st 2026

Master, I followed your instructions, but I got NCAM 15.7 and even though I activated it, it didn't open the channels, unfortunately.

I have Ncam v15.7 and it works just as well as Oscam.

I followed the instructions above exactly, Oscam works fine, but unfortunately, NCAM didn't work no matter what I tried.

You put the Ncam-15.7 sh cam script in the folder as Levi45 gave you and then you open Levi45 FreeServer and press the blue button on the remote and then the yellow button for NCam and that's it. Then you start Levi45 Cam manager Ncam 15.7 and restart the GUI and that's it. Wait a bit and it should work.

Quote from hakhan

Quote from levi45

Quote from hakhan

Hi Levi, I'm installing NCam v15.7-r0 ipk, but even though the installation is complete, Multicam Manager doesn't appear for some reason.

please look this my post

Post

RE: Levi45 Multicam Manager

(Quote from pabloweb)

So this is for levi45 multicam manager only . I have checked and find the issue @fairbird didn't named/change script correctly ,hopefully he will se this post and correct it in next release. But for now first delete any ncam script in the /usr/camscript/ direction then, send this script to /usr/camscript/ and give permission 755 then restart NCam_15.7 via levi45 multicam manager it should work fine . Also i add im very impressed with ncam well done @fairbird…

levi45

Feb 21st 2026

Master, I followed your instructions, but I got NCAM 15.7 and even though I activated it, it didn't open the channels, unfortunately.

I have Ncam v15.7 and it works just as well as Oscam.

Quote from 1z1z

Quote from pinokio0

Quote from 1z1z

Code

Hello, I would like to request the OSCAM emu 11943 emulator file, which is the latest version of OSCAM emu and is compatible with Dreambox One and Merlin Image. I would appreciate it if you could post or send the file to me in this section. Thank you.

I wrote you a nice article before about how to install OScam into your Dreambox One when you had Germini 4.20, but it seems you're not reading anything, and I also sent you Levi4 5 OScam and you're asking again what you need.

Hello dear friend, no matter what I do now, oscam emu Levi4 won't install on the Dreambox One that has the Merlin image GP4.2 on it. It didn't install on the image before either.

I transfer the OScam file to the tmp section through the FileZilla program and perform the installation through the Dreambox itself, but no emulator is installed or created on the Dreambox.

I don't know what you're doing, but you installed Oscam on your Germina 4.2 because you had it on it. You put it in the tmp folder in your dreambox one. Then you go to Setup with the remote, then Software management, and after that you go to Install local extension, then to Internal Flash, and open and install the Oscam that you put in the tmp folder, and that's it. Then Restart the GUI, and that's it.

Quote from ddinc

root@gbue4k:~# 192.168.1.6:9999

-bash: 192.168.1.6:9999: command not found

root@gbue4k:~# 192.168.1.6 9999

-bash: 192.168.1.6: command not found

root@gbue4k:~# nc-vz 192.168.1.6 9999

-bash: nc-vz: command not found

Display More

Maybe you should start your router once, then you'll see it's ok

Quote from 1z1z

Code

Hello, I would like to request the OSCAM emu 11943 emulator file, which is the latest version of OSCAM emu and is compatible with Dreambox One and Merlin Image. I would appreciate it if you could post or send the file to me in this section. Thank you.

I wrote you a nice article before about how to install OScam into your Dreambox One when you had Germini 4.20, but it seems you're not reading anything, and I also sent you Levi4 5 OScam and you're asking again what you need.

Quote from cha08

Hi, I'm new, I've installed the freeserver 2.4 on a Vu+zero4k with openatv. As softcam I use OSCAM11943-803 via Levis CamManager. But the Message of freeserver ist "No Servers were fount, check the logfiles for details " I don't know what could be the problem?

Can you open Levi45 Free Server when you press it with the remote control?

Quote from cha08

Hi, I'm new, I've installed the freeserver 2.4 on a Vu+zero4k with openatv. As softcam I use OSCAM11943-803 via Levis CamManager. But the Message of freeserver ist "No Servers were fount, check the logfiles for details " I don't know what could be the problem?

Have you installed the Levi45FreeServer plugin?

Quote from Giglioli21@

Ciao ho zgemma h5 con openpli 9.2 utilizzo cccam ma nn riesco ad installare Oscam ) selezionandola dalla softcam la attivo ma lo schermo resta nero ) mi potete dare qualche dritta per favore ? Usata con tvsat

Grazie e scusate se sbaglio qualcosa ma sono nuovo e inesperto

Qui puoi leggere alcune informazioni su come installare Oscam
Levi45 Multicam Manager

Thanks a lot Levi 45 .This latest version of FreeServer 2.4 now works perfectly as it should.

Levi45 doesn't work, at least for me Levi Free Server 2.3. I tried it and it won't, but this version 2.2. works without any problems. Dreambox two Gemini 4.2.

Quote from malubu

Hello, Sir first of all, congratulations on your work.

I am using the Merlin_OE-2.6-dreamtwo-experimental-20241130 software.

I am currently using the Oscam-emu-levi45_11942 version.

I added the Oscam config file you shared, however the channels did not open on my device.

Thank you in advance for your help.

Install Oscam 11943 and try it.

Quote from 1z1z

Hello again

Dear friend, I understand what you are saying. By the way, I connect the internet modem and Dreambox One to the Linksys router.

Then to test, I go into the Dreambox One and the plugin section and then I press the red button that means Manage extensions but nothing happens. And no download is done.

By the way, I know that if I connect the internet modem directly to the Dreambox One, the download operation is done in the plugin section and by pressing the red button, which means Manage extensions, but I want to know whether the download operation is also done in the situation that I said above?

Now I have a question for you, dear friend, with these things I said and that the Dreambox One and the internet modem are connected to the Linksys router and when I enter the plugin section and press the red button that means Manage extensions, should the download take place or not?

Now, if in your opinion the download operation should be performed, then why is there no download for me.

I also put these pictures above so that if there are problems with my settings, you can advise me.

Thank you

Display More

There is no need to open Manage extensions because if you want to install everything you need, you can install it via FTP in Dreambox One. You can install the things you want by pressing the blue button and you have the Blue panel addon and there you have the things you want to install if you need them. I install things via FTP in Dreambox Two and that's it, just like OSCAM. I think you need to connect your Dreambox to the router as you did before without the configurations you want to install. So connect your PC and Dreambox One with a network cable to the router and you get an IP address, that's it. You can install things via FTP in Dreambox One in the tmp folder. Here, read everything here, it says what and how you can install your things.


https://wiki.ihad.tv/index.php/GP4_Installation_(en)

I don't know if you read when people write to you or not.

We wrote to you a long time ago but you keep doing something else.

Your modem is a router and I don't know what you want to connect when you have contact with your Dreambox one. As far as I understand you, you want to connect another router to the modem you are calling, and your modem is a router.

Ok, I have macOS. Thanks for the information.