Posts by pinokio0

.Do you have disagc a/b/c/d for four satellites or do you not have disagc a/b/c/d

.See if you have a satellite 0.8 Thor 5/w/h Intelsat 10-02

He has a Gigablue UHD UE 4K-box.. Opena 7.3 has inserted satellites and it is probably not the same as his. So he probably does not have all the satellites he needs in the receiver.

.Insert the satellites.xml-file into your receiver if you don't have it, look at your IP address in the receiver and connect via computer via the ftp program and insert it into the etc/tuxbox folder. Start your receiver and enter your tuner and find the thor 0.8 w satellite and install it in tuner for only one lnb head. Then you go to search manually or automatically on your receiver. I don't know what your receiver is like and how it works, but those who have the same receiver as you will help you.

It doesn't matter which receiver it is if it has a 4k resolution. It's a matter of what kind of TV you have if your TV doesn't have a lot of functions in adjusting your picture that you open in 4k resolution. I have a dreambox two and an OLED Signature 65 and it has various functions in adjusting the picture. fantastic picture with dreambox two. The thing is only in the functions you have to set on the TV to have an even better picture with 4k resolution. If a person can't see well, he doesn't care which TV or box it is, it doesn't matter what the picture is, it's important that he opens only in 4K resolution

. If Gemini 4.2 doesn't work on dreambox two, you can also try dreambox 900hd, insert it and try it and it works for sure. I'm the test on dreambox two Gemini 4.2 and it works without problems

My friend, I have never had a problem installing an image either. I don't have a problem with ftp because I have communication with Telent, but the problem is installing another image through the website, because it loses its IP address, and just when I installed Opena TV 7.3 to see if the optical cable works, after that I couldn't install another image because it loses the IP address when I want to install the image.

The best option is to take a hammer and slowly tap the parts on the dreambox two. Maybe they will install properly heh

.Dreambox 720hd works. The problem is dreambox two 4k. I have a problem with it. I can't install image on it.

.toyssoft, I thought about that last night as you wrote and this morning I did it with no results. When I start Opena TV 7.3 in Recovery Mode dreambox just stops for a while as if it is looking for an IP address and after that just continues normally on Opena TV channels. Only through The SD card has an image with an IP address and when I try to install it via the website, the IP address disappears again. Thank you for your help in any case. I don't know if there is an image that I can insert via USB to open TV 7.3 and not use anymore. SD card because I would try to test another image. :Head Banger:

I managed to install Toysoft through the usb COM3 port Bootloader restore and it did everything as it should, but when I tried to install again through the website, it lost its IP address again after seven seconds. I think it's something to do with the image in dreambox. I inserted this the last Opena TV 7.3 to try the optical cable to see if it works on Opena TV, but now I can't install via the website only on the SD card. I can't even turn off the dreambox via the remote control. I tried to test the GP4 image on the SD card to see is able to turn off the dreambox via the remote and can do so without problems.

Yes, because I have cables, I tried it. I have Unifi Network private internet, which I make configurations and ip addresses myself, but it won't work.

I can install dreambox 720 hd without problems. I tried to change the other ip address but it always returns to the same ip address. Yesterday I had new drivers that I installed on the unifi switch and after that everything went wrong. Today I deleted everything and reinstalled everything as it should but dreambox two won't to insert a new image. I connected it to the Dream Machine Wifi router to see if it will work through it and it won't. Toysoft I don't know if I should try using USB to install an image if it can.

.Toysoft öppnar ip-adressen till dreambox två genom hemsidan och den visar mig att jag kan installera till exempel en ny bild. Under installationen försvinner helt enkelt ip-adressen till dreambox two och webbplatsen. Det är väldigt konstigt att den tappar IP-adressen.I have communication via telnet because I have an image in it and it works on dreambox.

I wanted to flash dreambox two and I can't. It gives me an IP address on the TV, but when I want to flash through the website, after ten seconds the image disappears and I can't install a new image. It's the first time this has happened to me. Does anyone have an idea what it could be. I tried to start the router and it won't. I reset the whole router and it won't.

.

Here, this balansero wrote in another language because he doesn't know English, so he asked someone to translate and wrote this:

this old bucket EVO infinity with Openatv 6.0 image

Levi45 plugin installed and Jedi Maker 6.24 downloaded from it

everything works properly and in its place

toysoft Thank you!

1z1z Here, my friend, try to install Opena TV 7.3. You can change the password on it. It's Opena TV 7.3 and only on it you can change the password that came out in May for dreambox 720hd. Test if it suits you.

Panda555, that's not a problem. The problem is in Opena TV 7.3 for dreambox 720hd. That box you have is not the same, and if it works for you, it doesn't mean that it works on all different receivers, changing the password. I change it on dreambox two and on other receivers without problems but the problem is the dreambox 720hd, my friend. So it's not a problem how to change the password, it's a problem with their drivers that they installed incorrectly on the dreambox 720hd

1z1z heheheheh password

maho33 friend, we know that. It's not a problem for us, it's a problem for Open TV 7.3