Posts by neolxs

I would be happy to pay for a decent box that did IPTV, Terrestrial, and Sat.

The cheap boxes are ok but I always found the Vu range looked and felt better, seemed to be a better build. Plus I would love a box that had a decent remote instead of all this infra-red cheap plastic. Something Bluetooth enabled,.

Ever since the end of Cardsharing for the most popular countries, it's gone very quiet with all manufacturers. Nothing groundbreaking or new at all.

Scrub that, I guess its best to keep trying.

kept going and eventually it installed open vix.

Hi all, been a while since I worked on these boxes.

My dad was using his Vu Solo2 (genuine) and he wanted to clean up the boxes hard drive.

To cut a long story short he ended up deleting everything on the Nand, now the box is stuck on starting.

I have tried installing new images, even the Origional Image from Vu, however the box says reading, erasing, then starting and does nothing, even after a reboot nothing there.

Any ideas?

Box was working fine.

THanks

Been trying to install satvenus backup images on my solo2.

SATVENUS TEAM FULL BACKUP VU+SOLO2 OPENBOX 0.0.6 BY @ZVONKO67

Satvenus Team Full Backup VU+Solo2 openBOX 0.0.6 by @zvonko67

If I copy to a usb the box does not read the file, if i copy directly to the hard drive and try to install through Vix it unpacks and still does nothing.

No issue with installing vix images, just cant install Sat Venus images.

Am i doing something wrong? Box is genuine.

Thanks

Hi all,

Was running CCcam in the bedroom using my box downstairs as a server, as normal with CCCam i was getting the odd glitch, (always happened when the wife was watching something!) Anyhow thought I would give MGCam a go. Well everything so far is working perfectly, no glitches in over 1 hour!

Using MGcam 1.38 on a Vu Duo for - Sly UK

My only problem is not all the channels are opening, some of the movie channels and sports open, others dont. Any idea what is wrong and what I would need to do to have all channels open?

Thanks!

Hi all,

Still having problems with Kodi on my solo2.

Its all running smoothly apart from one issue, NO sound!

I have tried a few things such as making sure AAC is on and I even tried the BBC I player fix that I read about on here, but still no luck, I get no sound.

Any ideas?

Thanks

Quote from master G

Did you install KodiDirect or Kodi launcher ?

KodDirect, the one that was on the Vix plugins.

Quote from girovend

It should look like that , then install arswizard and choose the build you would like to instal,
your actually wanting to install kodi launcher

Thanks, anyidea where I can find arswizard and how do i install?

Thanks

Hi all,

Installed Kodi on my Solo2 and just wanted to check something.

Kodi on the solo2 appears tobe just a drop down menu, no graphics etc.

Is this correct, because I was expecting something more like this

Is this correct, or am I missing something like a skin etc?

Thanks

Quote from jokosat

Hi wat you want to give to your friend c line or n line ?have you open port forwarding in your router ?

- - - Updated - - -

WRONG

[reader]
label = mates line
enable = 1
protocol = cccam
device = xxxxxxxxxxx,20000
user = xxxxxxxx
password = xxxxxxxxxx
cccversion = 2.1.2
group = 1
inactivitytimeou t= 1
reconnecttimeout = 30
lb_weight = 100
cccmaxhops = 10
ccckeepalive = 1
cccwantemu = 0

Display More

Hi jokosat,

I want to receive my friends line, not give.

I already have my sly card working, but he will share his line with me for BT sports.

I tried to enter the line in my server file where my sly card configs are but it wont clear.

[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid = XXXXXXXX
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

[reader]
label = mates line
enable = 1
protocol = cccam
device = xxxxxxxxxxx,20000
user = xxxxxxxx
password = xxxxxxxxxx
cccversion = 2.1.2
group = 1
inactivitytimeou t= 1
reconnecttimeout = 30
lb_weight = 100
cccmaxhops = 10
ccckeepalive = 1
cccwantemu = 0

Hi all,

Setting up my Vu Solo2 and I have managed to get the Oscam configs working fine reading my red sly card using the example on here. However when trying to setup a N: Line for my Duo box which has been relegated to the bedroom I cant get the line to clear.

My configs are

SOLO2

oscam.conf

[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1

[newcamd]
port = 10001@0960:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[monitor]
appendchaninfo = 1

oscam.server

[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid = XXXXXXXX
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

oscam.user

[account]
user = linuxsatsupport
group = 1
caid = 0960
ident = 0960:000000
au = SKYUK

[account]
user = Duo
pwd = Bedroom
monlevel = 0
uniq = 0
group = 1
au = SKYUK
caid = 0960
keepalive = 1

DUO

N: 192.168.1.17 12000 Duo Bedroom 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Any suggestions as to why I cant get my 2nd box to share?

Thanks.

- - - Updated - - -

Scrub that, solved it myself whilst looking over my post.

My issue was the wrong port in NewcamD

[newcamd]
port = 10001@0960:000000
key = 0102030405060708091011121314
keepalive = 1

Ill leave it up in case anyone else has the same issue.

- - - Updated - - -

Just need a little more help on this setup please,

I have my box sharing now with no issues, however I wanted to add my mates Line that he shares with me for BT Sports and MUTV, but when I add the line in Oscam it wont open.

Am I doing something wrong?

Here are the configs

oscam.server

[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid = XXXXXXXX
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

[reader]
label = mates line
enable = 1
protocol = cccam
device = xxxxxxxxxxx,20000
user = xxxxxxxx
password = xxxxxxxxxx
cccversion = 2.1.2
group = 1
inactivitytimeou t= 1
reconnecttimeout = 30
lb_weight = 100
cccmaxhops = 10
ccckeepalive = 1
cccwantemu = 0

Thanks.

Hi all, looking for a bit of advice as my head is getting wrecked here!

Setting up my new 1.1mtr dish, replaced my old TD88.

At first everything was perfect, but then my father came down and wanted a poke, whatever he did he lost all my sats!

Been at it for a few days now and still having no real success in getting everything back.

Here is where I am at the moment.

Using Usals and the dish seems to be pointing at the sats ok, however if I want 0.8 west I have to raise my arm elevation to around 25. But doing this loses 28e, 19e etc. If I readjust my arm elevation to around 22 I lose 0.8w but gain 28e, 19e, 16e, 13e, however not getting 23e.

It seems the dish is pointing correctly, but for some reason im out somewhere but im not sure where or how. Ive tried changing everything from the elevation of the motor, turning the dish etc. Does anyone have any idea where im going wrong so I can focus directly on that?

Thanks

Hi all, Im looking at upgrading my Dish, currently using a Triax TD88 and was looking at going for a 1.1 or 1.2 Dish.

Im living in the west of Ireland, Roscommon area and my first question is would the bigger dish make much difference in pulling in weaker sats? Thor 0.8w in particular.

My second question is what dish would be better ?

Im looking at a Triax 110 but I have also seen a unbranded dish 120.

http://www.ebay.ie/itm/2516009…geName=STRK%3AMEBIDX%3AIT

Would the Triax be better than the branded despite being slightly smaller, or would the 120 be better for size overall?

Thanks all

Thanks, i kept looking and found an easier way. I knew I read it here once before!

Simply load you new image to the backupimage folder on HDD or USB and restore image.

Thanks anyhow.

Hi guys, need some help

How do I flash a box without a USB chip.

Box wont read any USBS, tried all the formats ,different types etc.

I read here before and tried a method where you install the data somewhere in the duo and reboot the box?

Im currently booting up with the old software but flash with new.

Any Hels appreciated.

Thanks

Quote from jim1985

Try adding this to the oscam.config file:

Code

[newcamd]
port                          = 12001@0960:000000
key                           = 0102030405060708091011121314
keepalive                     = 1
mgclient                      = 1

And change the N line for the kids to:

Code

N: 192.168.1.17 [COLOR='#FF0000']12001[/COLOR] name password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

That sorted it!

Thanks

Quote from stevejo

Your mates line is group 2 make sure the dvbapi user also is allowed group 2 ..... for sharing you need to set up cccam in the config tab for listening port etc to share to him .....i assume your complaint is you cant clear his setanta is this correct ? not very clear post

Hi there,

My Mates line is now sharing but its very glitchy, for instance it clears for five seconds, freezes for 2-3 seconds then clears again. Works fine in CCCAM.

As for the 2nd part of my question;

I want to share my card to my kids bedrooms, I set up the Nlines on their boxes, and Ive set it up in Oscam User, but again their line wont work.

[account]
user = Name
pwd = Password
monlevel = 0
uniq = 0
group = 1
au = SKYUK
caid = 0960
keepalive = 1

N: 192.168.1.17 12000 name password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

In Ocam.config the cccam appears to be set up and shows this

[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1

Hi all,

I recently set up my Vu Duo on the latest Openvix using the Sly red card configs.

Everything there is perfect, card opens no problem.

My issue/problem is with sharing and receiving a shared line.

My Mate shares his Santana Sports with me and I have a Cline that he has sent me.

My Oscam Server Looks like this

[reader]
label = skyuk
protocol = internal
device = /dev/sci0
cardmhz = 2700
mhz = 450
caid = 0960
boxid = XXXXXXXX ( using my coverted boxkey)
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1

I have converted my mates Cline to Oscam and it looks like this

#[reader]
#label=XXXXXXXX.XXXXXX.XX
#enable=1
#protocol=cccam
#device=XXXXXXXX,XXXXX
#user=XXXXXX
#password=XXXXXXXX
#cccversion=2.1.2
#group=2
#inactivitytimeout=1
#reconnecttimeout=30
#lb_weight=100
#cccmaxhops=10
#ccckeepalive=1
#cccwantemu=0

But the line remains blank, I can use the line in CCCam but I would rather just use it in Oscam and have no need for CCCam.

Also another issue im having is sharing my box around the house.

Previously when I had a white Sly Card I simply put the details of the shared box in oscam user, such as

[account]
user = Name
pwd = Password
monlevel = 0
uniq = 0
group = 1
au = SKYUK
caid = 0960
keepalive = 1

But when I put it into the Red Card Sly oscam.user configs nothing happens, the screen just stays blank.

Thanks for any assistance you can offer.

Hi all,

Can anyone help with the boxkey.

I have used the configs and the redcard works fine in my box, except for sports and movies.

EDIT

Not to worry, I found my problem, I had CCCam switched on, turned it off and oscam reverted to local and worked.