Hi,
did you first try placing a heatsink on top of the CPU?
If it still does it, I think the CPU needs to be resoldered.
But a technician should do it. They're laser-welded.
And it could also be a Flesch, the ones near the CPU.
Also need to be resoldered with a hot air gun.
kernel-module-ftdi-sio_3.14-r0.8_armhf
kernel-module-ftdi-sio_3.14-r0.8_armhf.deb
Hi,
Look inside the file, it's already unzipped. If you don't know how to install it,
send the folder to the box as intri and go to its files, granting 755 rights to all the files, and restart the box.
Hi, you don't need to install it. If you have a backup, create a folder on your PC and extract everything inside with sevenzip. You'll find the drivers in the location I wrote above.
soft of the Pli folder (driver)
Yes, there are drivers for DE. I did another test on DE. I copied the folder to lib/module/3.14..../kernel/driver/usb/serial/ 1-ftdi_sio.ko 2-usbserial.ko Give permission 755 and restart the box.
Display MoreHi, does anyone know how to get smargo to work on a DM900 with DE 7.2? It worked fine with OpenPli, without needing to download additional drivers or anything else. With DE, the green light is solid, but it won't read cards. The cfg files are the same ones I used with OpenPli.
this is cfg of reader
protocol = mouse
device = /dev/ttyUSB0
I tried also
protocol = smartreader
device = 0403:6001
but nothing
Download drivers (usbserial...(1.0-r0) from the feeds With Openpli, it works automatically after rebooting.
autospeed = 0
protocol = mouse
autospeed = 1
device = /dev/ttyUSB0
I have everything active and the player works fine
because the other hosts work
OK, now I understand the problem... I think the server is busy or has... internet problems. I don't get enough buffering to enable viewing. It happened to me now that there's a storm near me, and now it doesn't work anymore. It's telling me I don't have space on the HDD or I need to use a USB drive for 450 MB. So it's not your problem, but I think the server is overloaded or there's not enough buffering.
Unfortunately, no DNS works.
I've tried everything.
but you have the plugin active and checked all its files configured well it needs the Player to run optimally or it also needs to be updated.
Look, I'm on TV 8
and look what movies I'm watching... I've already seen F1 on the Swiss circuit, now I'm watching movies with the settings I suggested above.
ok sometimes on certain files it gives that problem but if you change and choose something else maybe it works not everything is always available...!!
I have 60...64...it never goes beyond that. Just go to the junkyard to find old PCs and find the heat sinks. You can either install two small ones or one large one. Then they sell them with the perfect size for the width of the position that needs to be adjusted, height, and width. I did it for a friend and he's very happy with it. All you need is a small layer of silicone to hold it in place. I've also posted the photos here on the site...and eliminate unnecessary electricity waste.
I just tested it and it's slow to open pages...links...xxx...and on HD it doesn't open links and it's very slow on RaiPlay. NB: I have Eolo 100 mg.
I add something else today I turned on the PC and I noticed on the Lan (property) dns 9.9.9.9++149.112.112.112... I put them on the DM 920 in lan and it is very fast, it works very well.
i have google dns.
I have Eolo and with its DNS it doesn't start and with Google it doesn't start. I've already tested it several times to be sure, with the ones I mentioned it works 100x100.
Hello, congratulations...very good and beautiful image but I have a big problem: I have a monoblock dual feed LNB and I'm not able to assign ASTRA 19.2E to the diseqc port A, the selection is simply not available. The only satellite position available is HOTBIRD 13E... why? Also the entry AUTO is not working, can't tune to ASTRA19.2E. By the way, this LNB is working fine with a digiquest receiver, I can set port A to ASTRA and B to HOTBIRD. Thank you very much for the support!
Have you tried setting the position (advanced) and inverting it? Put 2 discs underneath and place the satellite dish you want. They can be inverted.
Maybe whoever installed your LNB didn't do it correctly in the bracket and it's inverted, and you always receive the first one with the central position...!!!
Display MoreAfter update 73 packages image dont boot.
which one?
Code/usr/bin/enigma2: error while loading shared libraries: libxml2.so.2: cannot open shared object file: No such file or directory
To solve the problem
put in telnet
Codeinit 5then send the file ( libxml2.so.2 ) to :
Code/usr/lib chmod 755
next
Coderebootupdate image
A fool remains a fool
Title in bold for the blind
openpli-HomeBuild-dm920
I had the same problem: soft lock with red LED.
I inserted it with
Dcc in lib...libxml2.so.. with 755 permissions
and from telnet reboot it worked and rebooted correctly.
Perfect
Hi,
Yes, it could work, but it needs to be done by a technician. The connection needs to be modified on the motherboard. There are documents online... you can leave the internal mini USB and do many useful things to the DM 800... by expanding the software.
updated...spoiler
Everything worked before,
I think it changed when I updated the software to py.3.13.7 via the web. What changed...?
x passata
ok solved now it works...thanks a lot
Who can give me info on this problem...circled in red??
I have already uninstalled and reinstalled from the feeds but the problem remains and even installing from the Linuxsat Panel does not solve it and opening a vivedo file from the web... indicates ffmpeg not found...??
openimage-develop-dm920-from satpong
