x....Che Guevara
hi, what skin are you using...??
Posts by piterfree
-
-
if you check my first photo you will find the right answer...copy...!!
-
-
-
v.7
caid = 0500
ident = 0500:070200
auprovid = 070200,070210
v.6
caid = 0500
ident = 0500:060200
auprovid = 060200,060210
-
-
Dm-900-OpenPli.Japhar.backup-20260327-piterfree.rootfs.tar
-
-
On principle, I never use IPTV again... even though I've made a few backups with mine on board...!!
Now I only test the channels
to test the German ones,
and I watch them often because I worked in Germany for a few years.
To make the channels work very well, my advice is to
enable = 0
on every card reader
because it affects the EMU part.
enable = 1
only works with the channels.
Screenshot_2026-03-26-13-28-06-657_org.mozilla.firefox~2.jpg
SoftCSA.
-
Dm-920 Egami 11-r17 I'm looking for a new OSCAM + PAC TVSAT to manage the device (PCSC). I haven't been able to find one that works, even if it's an old OSCAM!!
It has the current SSL 102.
I was doing tests on Pure2 and I can't find any oscam with pcsc support..!!
-
Just to add my opinion,
I installed Pure2 and tried using the OSCAM.
To my surprise, if you use the OSCAM feeds, they work, but if I wanted to update them, I'd need a wizard to do it for me.
I've been using all the OSCAMs available on LinuxSat for 4 hours now, and not one works... there's something I'm not convinced by with this software. I've been using many different ones, but I've never encountered anything like this one.
If you then do a soft update via the web, it worked fine, but as I said, only CCCAM 2.32 works; the other eMUs can't be updated.
It's like being a child again, you need food (the feeds).
If someone needs to use a Smargo or other adapter, what should they do?
There's nothing about this on the web.
-
Hi,
1* If you have ATV, Egami, and other software, there could be a problem if the kernels of these software are changed...!!
2* To fix this problem, you need to send a software that restores the original kernel.
3* Send the GP.4.2.tar.gz software, then put the software in recovery mode after rebooting.
4* Send the software of your choice, it will be perfect.
-
ATV-8-DM-920-backup-piterfree
It works great.
It only has a few small freezes.
The wheel spins for 3-5 seconds sometimes. I don't know if it's the skin or something else.
The only downside is that it's pointless to back up the software.
After 30 minutes, if you search for it on the HDD, there's no software saved.
I wish it could also be used as a single software and not for multiboot.
+++++++++++++++++++++++
With Zetagemma or another Uclan box, I just need to use a different software to save backups in multiboot.
With this ATV-8, there was no way. I used Egami to save the ATV-8, and as if by magic, it had the same problem: it doesn't see the software in multiboot... what can I say for starters... the developers will still have to work on it.
-
-
Look for another power supply
from 12V to 3A
-
1* remove the HDD
2* unplug the power and if you want to change the software, you can use a USB stick with the original software of your choice inside... remember that you will have to hold down the button inside the reader door on the top left side.
-
DM_800_OpenPli 7.2_AU_ssl.DM_800_OpenPli 7.2_AU_ssl.84D
Clone...ssl 84D
-
file link-does not exist.....
via cell...!!
-
backup.tar.gz
07.03.2026 - 19,40
Codehttps://mega.nz/file/Z9pDxbxJ#P-Tif1rITVpbR8fbuOPjpmKe_ajRKlqReqfvGrgcAo8 -
I am not the producer of the software but Japhar OpenPli 9Xstar
... 
