I noticed that it's very stable once plugins are installed with IPK, it's perfect.
I'd add that this software doesn't yet have the SoftCSA,
but it still works fine for using SteamRelay with OSCAM 11932, no higher.
Posts by piterfree
-
-
If you had a PLI before, it might work... but if it doesn't boot...!!
You need to restore the original kernel.
1. Put it in service mode.
2. Send a GP.4.2.tar.gz that restores the box to the original Flesch.
3' Put it in service mode.
4' Send the backup you want and it will work 100% perfect.
-
DM-920
Backup-Japhar-06.03.2026-piterfree
Codehttps://mega.nz/file/p1oBBI6D#KPbTB7CWcwmqf9hjfrulE585zAFOxup1uXyGANKIfCoextract the file from the zip and rename the final part .tar
-
The red LED isn't a problem, but it should be set from the Settings menu,
Advanced Settings,
Display colors should be set.
-
A normal ATV does it in a car.
But the way I did it works perfectly, but it just needs to be mounted
and it works.
I've always done it with an old DM-800, too.
-
Yes, it does.
If you don't mount it as an HDD,
obviously it won't create it.
I have a 1T on my 920.
But it has to be a good SSD, otherwise it often loses the partition.
I format it from my PC with a specific program and set it to FAT 32.
-
Hi, this image for Dreambox DM900 doesn't work, the red light stays on instead of the blue light.
It's standard practice.
Each software has its own kernel.
They're like cell phones...modifications are fine if the software is compatible with its kernel, otherwise it will never turn on.
The DM-900 and 920 are always restored effectively with two steps.
1. Send the original GP4 or DE software. Once finished, it reboots, perform a generic setup, do a mini SAT scan, and then put the box back into
recovery mode.
2. Now send the software you like and you'll see it come back to life.
-
It's ok, so the problem is that you don't
have the OSCAM that manages it.
You have to change it, put 11942 or the latest 11943.
Screenshot_2026-02-25-12-06-15-960_org.mozilla.firefox~3.jpg
Screenshot_2026-02-25-12-06-04-629_org.mozilla.firefox~3.jpg
if I understood correctly...???
-
Check the 3 entries I highlighted carefully.
If they're the same...??...oscam...instead of cccam...!
Where do the cherries come from...!!
Screenshot_2026-02-20-21-40-51-542_org.mozilla.firefox~3.jpg
-
fix...dns
test
8.8.8.8
8.8.4.4
I tested it last night on the VuSolo-4k
and set DNS to 8.8.8.8+8.8.4.4
and it worked right away.
-
Try the MadMax v.2.4
Pli e' ok
Where can I find the skin? It's not included with the Egami skin.
MfG
I was wrong about the MadMax skin...sorry.
Come to think of it, I haven't changed any skins on Egami.
If you're using the Egami software, I did everything with its default settings, and those photos I posted are its own.
-
Display More
It is there sir
check this out on ascam or ncam
Which skin are you using?
skyn o-Dreamy fhd ...mini fhd...
then just write about the csa...there are more important things in the image..
you don't believe?
I just want to understand why it's visible for some people here and not for me.
MfG
Try the MadMax v.2.4
Pli e' ok
skin It's my favorite, but don't use the movie icons; the default is very fluid.
-
Display More
Come hai fatto a visualizzare l'icona SoftCSA nella skin (?) nell'immagine n. 174?
MfG
it's already inside the image
è gia dentro l'immagine Egami non è farina del suo sacco..
That's exactly what I confirmed if everything is
perfect...
-
Come hai fatto a visualizzare l'icona SoftCSA nella skin (?) nell'immagine n. 174?
MfG
ho su la Skin e' quella di Egami che usa adesso e lo fa' in automatico....
nel riavvii del box una volta settato questa nuova Soft...se rimane in uso permanente su ogni canale che e' via cilinee da' quel simbolo,
sono passato su canali Tedeschi che usano altro Provd e scompare anche se ce' la visione...mi sembra che sia fixsata su id Provid 09B....su questi e'sempre visibile.
-
920 Egami 11-R5
Upload via web ok 100x100
oscam 2.26.02-11943-803Screenshot_2026-02-20-21-01-07-929_com.whatsapp~3.jpg
Screenshot_2026-02-20-21-01-15-931_com.whatsapp~3.jpg
Screenshot_2026-02-20-21-40-51-542_org.mozilla.firefox~3.jpg
When changing the OSCAM bin, the settings on DVBAPI must be redone.
-
If you have cards, you must set enable = 0 under the reader.
-
You need to check if it works with the OSCAM protocol, reboot, and then set the CCCAM protocol.
One of the two must work.
-
-
test,
Screenshot_2026-02-20-13-18-02-129_com.android.chrome~2.jpg
Screenshot_2026-02-20-13-19-19-794_org.mozilla.firefox~3.jpg
if you use oscam...save on oscam,
cccam save to cccam
or a scan on the transponder..!!
-
I noticed something, I have signal on some mediaset channels. My server with oscam-master opens all these packages! But I miss the signal on almost all channels!
dvbapi (client: Enigma2, protocol version: 3) 0086:183D@000000 Focus HD [Mediaset] disable Stream Relay
