Posts by piterfree

I did a test on 7020 if you only send its soft... without anything the Viacess Cam works without anything I took that one out I put in not the WeCam but the other brown one always TvSat and I made it work without doing anything it was fine... .after having tested with 2 other ATV and Japhar softs...now I've put back the soft that I put in at the beginning...strange now the Cam works immediately but makes waves as if there was interference...I ruined the arduer which was fine before...be careful it doesn't need anything as it is a soft Mips the Cams are designed the latest not for these decoders...it's tough.

(buona domenica anche a te..)

for soft japhar...the combination between ssl and driver was perfect and made it work perfectly...but it was the plugin and emu problems that gave me problems and the remote control.

hi, tested all day...I found a strange flaw...in adding the plugins due to stability problems...once I had finished everything to install an oscam icam...all the emu's were deactivated. .I no longer had vision I put oscam and start mgcam...it drove me crazy as if the emu no longer worked and yet at the start they were fine (tvsat works) I left the decoder 3 times and if one thing causes problems then another arises other times the remote control delays and the response becomes slow then I tested Atv...same problem on the emu it has almost the same problems with a very heavy remote control and makes you press the buttons a lot...annoying and in the end it has a green screen and on the third once it resets...annoying...I have to confirm the more stable OpenPli 12.3...I managed it works on the first try, installed everything and did everything I wanted, it's perfect remote control ok and the 3 emu's perfect with Au tvsat via web....unique (serious flaw) there is no way to make a backup...to do so you have to...trouble restoring it...it resets your decoder...and you have to do everything again from boss...tested it with everyone both ATV same thing no...backup...what you save is rubbish.

Thank you...I'll test soon

openatv-7.3-dm7020hd-20231025_flash.......

openatv-7.3-dm7020hd-20231025_web.....

I think no one has checked or edited this image or soft...???

the biggest problem is the pass from its pass network menu...it doesn't save it's a shame to make a soft like this it seems new but in my opinion it's extremely old...or you don't want it to work on purpose and I'll stop here

It's useless to post a soft if it's not functional

,

installed openPli 12.3 and it's a gem because...??

H5_OpenPli-8.3_backup_AU_31.08.23_piterfree

ATV_6.4_ZetaGemma.h5_AU_via web

extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ]

2 mips

test...ok 100x100 oscam.conf...DM920 Arm

I did the test...I deactivated the gold card and within 4 minutes it lit up...with that config.

hi, ok...seen the bin...I had the same problem yesterday all day...and I think it's something that depends on the oscam.conf protocol... because on other mips decoders it worked very well and also on the H7 of an acquaintance of mine he has the same config as me...I will have to have that config sent back...to see the difference (the oscam.server file is the same for everyone) .

the writing position seemed wrong to me,

to make the pastebin work....you need Samur's Oscam,

read before posting fancy things...pastebin doesn't work on all oscams...it would be too easy.

if you don't have Samur's oscam installed or if the pastebin doesn't work... you will have to search for the emm and send it manually in the oscam reader... if you read there is information on how to do it.

pastebin or send Emma a hand

I did it... and off she went... flying...

:Translate:

etc/CCcam.cfg

Quote from rubeni

hello samur pls can you compile a oscam for my debian x86_64 ( pcsc )

i don't know what happen to my 183E don't update anymore

HI,

there's no problem if it's blocked... it happened to me too... I just dialed the tvsat number 06... rome and listened until the... 5th key and sent via cell phone keypad... number of the card and the #..hash is over... and it sends you the activation again... without needing explanations.

Quote from skylab

cb01.uno host work fine on python3 images,the version is downloaded from the plugin dreamsatpanel

Ich habe Openpli Py3.9.9

und es aktiviert es nicht...??

Perfekt

altadefinizione01zone

backup OpenATV 7.3-dm920-2023-10-29-16.piterfree.tar...via web

04.08.2023...29.10.2023...Au TvSat...via web

Motor

4_Sat 13'+19'+5'+9'_Vhannibal+Dtt lombardia

ok Ci+Plus TvSat Nera

OpenWebif...8888

NGsetting

tv addon

tv manager

TheWeather

XCplugin

JediMakerXtream

ServiceApp... not activated

Skin_Revolution_Pro_DRAGON

ok..Smargo

softcam.CCcam

softcam.doscam

softcam.gbox

softcam.oscam-emu..ok reader TVSAT_HD...AU...via web

softcam.oscam-icam

softcam.oscam-smod..ok reader TVSAT_HD...AU...via web

softcam.wicardd...ok reader TVSAT_HD+SD

but if you post and let people know which decoder and which software you use, some advice could be given...maybe you'll get confused (for the bin)....64..or...arm..??..and ssl

Quote from dog-man

I have found an oscam that is working with OpenPli latest nightly build and VU Ultimo 4K, but sly.de is not really watchable.

Lots of freezes and stream relay not always kicking in.

if it doesn't go well, the reason is either your supplier has full cash and needs to restart or has too many customers

hi, I made several decoders of that model, I had 3 now I'm left with only one because it was given to me... HDMI doesn't work anymore practically only with SCARD it looks bad but it works, if yours is a clone it won't work 'anymore and the file should be changed if you want to restore it, there is no longer any way to restore it, I made it original and put the latest OpenPli soft because I had a soft that via port com and Lan wrote some...... ... dots in sequence and I sold those decoders, the one I have works very well but the scard image is not good and I only use it for testing, I lost the software to play with these VuPlus decoders in the PC that hdd with virus it blocked it by converting all the files that were no longer possible.

HI,

if the oscam is active (samur oscam)

you have the config...incorrect or not the card...it's only for 183E Golden...obviously the pastebin must be right...because I know it has been changed.