Posts by piterfree

openpli 7.3 dm800 sim2.01 ssl84d

84D..d...Clone

84....Originale.

feed...mountmanager...!!

Hi, I'm curious what you need Pli 4 for as there is no more support...today it's wasted.

the only problem is that that decoder cannot be backed up otherwise I would have already done it and put it in upl..

that decoder has its own front button to send them to service... just hold it down and turn on the power.... to send the complete soft via the web.

you have to go to the 7020 Japhar section and download its soft...in its zip...there are 2 ,

1_secondstage-dm7020hd-89_original.nfi

2_secondstage-dm7020hd-89_Japhar_v6.nfi

and take the first file that says Original and you have to send it... only if you want to at least try to get it started.... then you will decide whether to change all the software or keep what you currently have, it's just a way to check if the problem is only the second stage... ok.

1* turn off the decoder

2* program on the PC loder JapharFlasher activate it only with the tick for mini USB and accent the decoder it will find the model you send and send it

JapharFlasher...program + ssl

1_secondstage-dm7020hd-89_original.nfi

and turn everything off and turn the power back on.

with Openpli 6.2-release if you access the active feeds...green button plugin softkam download MGcam 1.35...which automatically updates you SSL and becomes 102 so you will find the corresponding one (misp 102).

HI,
she has another path
menu/plugin/green button
system plugin packages
self-resolution (7.3....)

hi, I always fish them 24 hours before...you'll find it tomorrow...on your new one...don't worry.

as I get home I have a decoder with the same Atv 7.3 and I'll show you the menus that are in Atv.

thanks...Toysoft...I didn't know how to explain it...I posted the files not only to do the soft with japhar but mainly the ssl to repair his soft.

HI, menu/settings/ you need to find the menu with install local extensions Not in normal plugins they are local extensions I did this on Dream920 ATV 7.3

JapharFlasher...program + ssl

1_secondstage-dm7020hd-89_original.nfi

2_secondstage-dm7020hd-89_Japhar_v6.nfi

test ok

in...openpli-enigma2-8.0star-dm7020hd_Japhar_v6_GStreamer_1.18.3_20210720

(via web o JapharFlasher....openpli-enigma2-12.3-dm7020hd) perfekt

plugin autorisoluzione nei feed

++++++++++++++++++++++++++++

self-resolution plugin in feeds

HI,
but what is the use of openpli...??

HI,
if you can go to the feeds and download Mgcam 1.35 which updates you in the car to ssl 102 I'm doing it on all the old and new decoders it works, make sure you do it.

terabyte

ok... you must first... have an oscam installed... 2... enter the samur bin... rename it like the one in the decoder... 3... delete the bin you had in the decoder...4...send the samur bin to the decoder..(oscam_emu...or oscam)...restart the decoder.

2*

OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-1.0.2

Quote from marcus83

Quote from samur

Now, you can download emms from http and https pages

both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.

emm is only added to the card if your reader is : 183D or 183E,

users also can create there own "URL" example:

For rentry: emm_url = https://rentry.co/"xxxx"/raw

for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."

#####

1)_Locally Activation (server side):

Code

[reader]
label                         = Tivusat_183E
protocol                      = internal
device                        = /dev/sci0
autospeed                     = 0
caid                          = 183E
rsakey                        = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
emm_url                       = https://rentry.co/ognzc/raw
emm_reload_minute             = 10
detect                        = cd
mhz                           = 368
cardmhz                       = 368
nagra_read                    = 1
ident                         = 183E:000000,005411
group                         = 1
emmcache                      = 1,1,2,0
blockemm-unknown              = 1
auprovid                      = 005411

Display More

##

2)_ Remotely activation (client side):

clients (cccam, newcamd and camd3x) also can send the EMM to the server side,

Code

[reader]
label = cccam- client
protocol = cccam
device = host,port
user = xxxx
password = xxxx
inactivitytimeout = 30
emm_url = https://rentry.co/ognzc/raw
emm_reload_minute = 10
group = 1
cccversion = 2.3.2
ccckeepalive = 1

Display More

emm_url: in the config, still working .

So, as we can see there are 2 ways for the EMM then we can let the classic config on the server side as before

and we use the second way (Remotely activation).

emm_reload_minute = , the default value is 60, so after the activation you can change the value to : 14400 (10 days)

2023-08-15 08-35-23.png

the reload time, in minutes, can be freely selected (minimum 5, maximum 20160 minutes), default is 60 minutes

##

debug 64 for log parsing if you want to see details:

2023-08-13 16-10-00.png

Or put in oscam.conf:

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11724-798

# Read more: https://svn.streamboard.tv/osc…on/doc/txt/oscam.conf.txt

[global]

logfile = /dev/null

initial_debuglevel = 64

...

..

.

Good luck !

;

Display More

hi guys!

which oscam version should I install for Octagon SF8008? thx!

Display More

1*

cek...SSL....in telnet.....ls -l /usr/lib/libss*.*

2*

OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-1.0.2

OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-1.1.1