Sorted! I # the ECMwhitelist, the ECM length must have changed.
http://linuxsat-support.com/os…at-how-do-i-maintain.html
Now to move everything to OSCAM only.
Sorted! I # the ECMwhitelist, the ECM length must have changed.
http://linuxsat-support.com/os…at-how-do-i-maintain.html
Now to move everything to OSCAM only.
My mistake on the N line, I've fixed that bit. Now all I get is.
2012/09/03 15:36:45 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:45 11335 c05 jsc (0603&000000/20F6/3C:3901): not found (1 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:45 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:45 11335 c05 jsc (0603&000000/20F6/3C:77C1): not found (0 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:45 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:45 11335 c05 jsc (0603&000000/20F6/3C:BCB7): not found (1 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:45 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:45 11335 c05 jsc (0603&000000/20F6/3C:41C1): not found (0 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:45 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:45 11335 c05 jsc (0603&000000/20F6/67:D9AC): not found (0 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:46 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/3C:5023): not found (0 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/3C:9DD9): not found (0 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/3C:B9D9): not found (1 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/3C:3901): not found (1 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/3C:77C1): not found (1 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/3C:BCB7): not found (1 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/3C:41C1): not found (1 ms) (i*****_do_cmd [0]<2)
2012/09/03 15:36:47 11335 r03 Error, unknown protocol type 15
2012/09/03 15:36:47 11335 c05 jsc (0603&000000/20F6/67:D9AC): not found (1 ms) (i*****_do_cmd [0]<2)
Display More
JSC comes up as 'CARDOK' in webinterface.
2012/09/03 15:11:15 10793 r03 detect i***** card
2012/09/03 15:11:16 10793 r02 [videoguard2-reader] tier: 0039, expiry date: 2012/11/01-00:00:00
2012/09/03 15:11:16 10793 r02 [videoguard2-reader] tier: 0047, expiry date: 2012/11/01-00:00:00
2012/09/03 15:11:16 10793 r02 [videoguard2-reader] tier: b765, expiry date: 2012/11/01-00:00:00
2012/09/03 15:11:16 10793 r02 [videoguard2-reader] tier: b766, expiry date: 2012/11/01-00:00:00
2012/09/03 15:11:16 10793 r02 [videoguard2-reader] tier: b772, expiry date: 2012/11/01-00:00:00
2012/09/03 15:11:16 10793 r02 [videoguard2-reader] tier: b773, expiry date: 2012/11/01-00:00:00
2012/09/03 15:11:16 10793 r03 caid: 0603, acs: 6.08, country code: QAT
2012/09/03 15:11:16 10793 r02 [videoguard2-reader] tier: b860, expiry date: 2012/11/01-00:00:00
2012/09/03 15:11:16 10793 r03 providers: 4, ascii serial: ##########, hex serial: #######, hex base: 1D
2012/09/03 15:11:17 10793 c04 client connected to 10000 port
2012/09/03 15:11:17 10793 c04 encrypted newcamd:10000-client 127.0.0.1 granted (sly, au=*** card)
2012/09/03 15:11:17 10793 c04 user sly authenticated successfully (CCcam)
2012/09/03 15:11:17 10793 c04 AU enabled for user sly on reader *** card
2012/09/03 15:11:19 10793 r03 active providers: 4 (205271,008d00,008d00,008d00)
2012/09/03 15:11:19 10793 r03 found cardsystem
2012/09/03 15:11:19 10793 r03 entitlements for provider: 1, id: 205271
2012/09/03 15:11:19 10793 r03 chid: EFFE, date: 2008/07/03 - 2008/07/03
2012/09/03 15:11:19 10793 r03 chid: EFFD, date: 2008/07/03 - 2008/07/10
2012/09/03 15:11:19 10793 r03 chid: 006F, date: 2008/07/03 - 2008/07/10
2012/09/03 15:11:19 10793 r03 chid: 0004, date: 2010/04/04 - 2010/12/14
2012/09/03 15:11:19 10793 r03 chid: FFD8, date: 2010/04/05 - 2010/04/15
2012/09/03 15:11:19 10793 r03 chid: 7FFD, date: 2010/04/05 - 2010/04/15
2012/09/03 15:11:19 10793 r03 chid: 7FFE, date: 2010/03/30 - 2010/04/29
Display More
I've just tried that as well. Sly works, but JSC still doesn't.
oscam.server
[reader]
label = *** card
enable = 1
protocol = internal
device = /dev/sci1
caid = 0963
ident = 0963:000000
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out.
[reader]
label = jsc card
Protocol = internal
detect = CD
device = /dev/sci0
force_i***** = 1
Group = 2
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
caid = 0603
ident = 0603:000000
camkey = 0000000000000000
camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000
ecmwhitelist = 0603@000000:34
Display More
oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0603:000000
[cccam]
updateinterval = 3000
Display More
oscam.user
[account]
user = sly
pwd = sly
group = 1
monlevel = 0
au = *** card
caid = 0963
ident = 0963:000000
keepalive = 1
[account]
user = jsc
pwd = jsc
group = 2
au = jsc card
caid = 0603
ident = 0603:000000
keepalive = 1
Display More
The 2nd user just doesn't show up in webinterface.
Sorry if I've made this a bit confusing.
I used to run OSCAM and CCCam, with OSCAM reading my Sly card and CCCam sharing it. Now I just want OSCAM to read and share.
My last post said 'I'm using an N line in cccam to test, as I don't want to convert all my clines/flines yet if OSCAM isn't reading both cards correctly.'
Basically what I meant here is I wanted to get both cards read properly by OSCAM and watched via an N line in CCCam before I switched solely to OSCAM. As I have multiple c lines and f lines I thought it would be a pain moving everything until JSC was actually read by OSCAM.
I'm going through musogeek's post now.
oscam.server
[reader]
label = *** card
enable = 1
protocol = internal
device = /dev/sci1
caid = 0963:000000
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out.
[reader]
label = JSC
Protocol = internal
detect = CD
device = /dev/sci0
force_i***** = 1
Group = 2
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
caid = 0603
ident = 0603:000000
camkey = 0000000000000000
camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000
ecmwhitelist = 0603@000000:34
Display More
oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000
[cccam]
updateinterval = 3000
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = vudvbapi
Display More
oscam.user
[account]
user = test1
description = for local mgcamd or DVBAPI
pwd = test2
disabled = 0
uniq = 1
group = 1,2
au = lower card
#caid = 0963:000000
[account]
user = vudvbapi
pwd =
group = 1,2
au = lower_card
Display More
At the moment I'm using an N line in cccam to test, as I don't want to convert all my clines/flines yet if OSCAM isn't reading both cards correctly.
I'm stuck with the JSC card, it comes up as 'OFF' in the webinterface, I've used the settings from the forum.
I just wanted some help on going about this set up.
I have a VU+ Duo. I have a JSC Sports card and a Sly UK card.
I want to run my Sly card on OSCAM alone, so I want OSCAM to read the card and share the card.
I want my JSC card to also be read and shared, but independently to the Sly card, so either running it on OSCAM too but separately or on CCCam.
How would I go about this?
That is perfect! Thanks a lot.
I've done that, it's using the caid posted already, still doesn't block it though.
Working here, HD is more like a middle point between SD and HD :D
Tring being a bit short on the full thing!
I'm already using that and they still clear?
Sort of worked, tried { 0:0:2, 0500:42400, 603:0 } but some still clear it!
fergyc shows as hop1 for all his cards on my box. So my VU automatically uses his line even though the ECM times elsewhere are better.
I tried to block a cline someone gave me from clearing JSC sports, however it's still doing it.
What did I do wrong?
C: IP 12000 User Pass no { 0:0:2, 603:0:0 }
Thanks,
I can't seem to lock on to it, any one else?
Hey,
I change the audio tracks on certain channes on my box but when I reboot it seem to have forgot them...
Is there a way to set a preference order like on the old E1 boxes?
Thanks,
hi ILM16
is the motor not turning at all when changing sats?
or dose it turn but not get a picture and just shows the motor on your tv screen?
It shows the 'motor' moving image and I don't hear it moving.
I've managed to get it to move the motor without USALS but each satellite needs a large position movement to get the signal.
The issue I'm now having after tuning 28.2E, 19.2E and 16E is that I've tried to add 23.5E but it's not saving it. That is to say - I can't fine tune it. It's not an option, as if it's not been saved.