image does not work box just stuck on load thanks for trying
Mate,
I think you tried front panel method to install it. Whenever installing some backup of E2, always use Spark plugin "e2_upgrade" to install that backup.
image does not work box just stuck on load thanks for trying
Mate,
I think you tried front panel method to install it. Whenever installing some backup of E2, always use Spark plugin "e2_upgrade" to install that backup.
buc61b
Yes, I have checked, it crashed at Rai 1, 2, 3. Can you tell me, did it appeared only in this update or it was also present in the backup of 15 September and 31 July? But, thanks for pointing out the problem, I will certainly try to remove this error in the next update.
Regarding YT, in fact the main hurdle in resolving this issue is that in my country YT is blocked So I cannot test myself by playing YT videos. Can you help me out by testing another backup with youtube only (no TSMedia and MediaPortal installed)? I will send you the link through PM and you test that image and then let me know the result later on, through PM.
Regards,
mtahirghauri
Mates,
Here is a little update to my backup.
Improvements:
1. It is possible now to grab screenshots with video. You may use WebIF or some Android tool like Vu+ Player or Dreamdroid to grab screenshots. Earlier, screenshots with OSD only were possible to grab.
2. Picons for HotBird, DishTV SD (95.0E) and FTA channels of Asiasat 3S (105.05E) added.
3. Skin dTV-Reloaded HD with softcam info added.
Download here:
Engineer Khans Backup OpenAR-P Enigma2 for Spark7111-21-09-2013.rar
File Password: engineerkhan15
same issue did it for e2upgrade and reboot stuck on load not booting further older backup ar-p engineerkhan works ok in spark st7111
Brother, I don't know what may be the cause for this problem in your case. I would suggest, try installing it once again by spark plugin method and then see what happens.
ill try it now as well mate
I cant even get it to install just unzipped it to usb drive and i have enigma2 folder but it uploads half way and then stops.
Mate, please use the correct method to install this backup, which is by using Spark plugin "e2_upgrade" as rightly described by lfc4ever in his post.
dont work on my 8900. After 5 Minutes the stb freeze and not respond.
Please give more details, it freezes while watching channels or it freezes while installing?
File Password: engineerkhan15
Yes, file password is engineerkhan15.
Mates:
Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon OpenAR-P Enigma2 Image dated 14 April 2013.
Features:
It's main features include:
1. Sateliite XML file include all satellites between 50 West to 140 East. Ku band and C Band on same position are included as separate satellites.
2. Softcams, including CCcam, Mgcamd, Oscam v18 t46, Camd3, Wiccard installed. DigiTurk at 7 East OK with Oscam v18 t46.
3. Plugins, including TSMedia 3.91, MediaPortal 4.8.0, MyTubePlayer, CoolTV Guide 6.4.0, DD Subtitle Player 3.27, HDD Manager installed. Recording on USB HDD possible using HDD Manager plugin. Many more plugins may be installed from built-in server.
4. New boot logo added. "Magic" and "nBlack51" skins installed, more can be installed from built-in server. Keymap used is "Amiko" but it may be changed to "E2 Default" by going to Menu>Setup>Key Map.
How to install:
It should be installed using Spark plugin "e2_upgrade".
FTP Login details:
User: root
Password: root
Here are few screenshots to give overview of this Image:
Boot Logo:
Infobar:
Bouquets View:
Channel List View:
Menu:
Blue Panel:
Alternate Softcam Manager:
GigiTurk OK on Oscam:
Plugins 1:
Plugins 2:
TSMedia 3.91:
MediaPortal 4.8.0:
CoolTV Guide 6.4.0:
DD Subtitle Player 3.27:
https://hotfile.com/dl/2466466…k7111-21-09-2013.rar.html
File password: engineerkhan15
Display MoreHi I am new in this forum and new user of amiko player. Used Dreambox some years now.
Thx for the image very good work. Two questions
1. I tried to update ts media but I could not even though I downloaded the new version. When I restart it still has the old version 3.3. Any ideas?
2. I wish to install the extra panel. How do I do that?
Thanks for your appreciation. You may update TSMedia manually, download attached file "TSMedia 3.9.rar", extract it and you will get two folders inside, "etc" and "usr". Using some ftp utility (DCC 2.95 or Filezilla) copy these folders to the root of your Enigma2 Image. In this way, plugin files will go to their respective folders. Restart Enigma2 and you have latest TSMedia 3.9 working in the Image.
For extra panel I could not locate that plugin. You may do like that, search ipk file of the plugin and extract that file using 7zip and then from the extracted folder, copy plugins files to their respective folders in Enigma2 (using ftp, of course) and then restart Enigma2 to check whether plugin is working or not.
Display MoreThnx for this great image, this is the best of enigma2 for alien1
Few questions;
How can I get a "DDSubtittle" i didnt find him in plugins?!
And what's about "Youtube" i find some app "mytube" but it doesnt work.
Last queston, is there any posibility to surf on this image, some kind of webrowser or something like that....
Thanx a lot bro...
I do not use "DDSubtitle" myself, but for you, I am attaching it here. Download "DDSubtitle.rar" file and extract it to get "usr" folder. Using some ftp utility (DCC 2.95 or Filezilla) copy this folder to the location: root of your Enigma2 Image then restart Enigma2 and you will have your desired subtitle player.
For youtube, download "MyTube.rar" file, extract it to get "usr" folder. Using some ftp utility (DCC 2.95 or Filezilla) copy this folder to the root of your Enigma2 Image then restart Enigma2 and you will have working youtube plugin.
Regarding, web browser, I am sorry I have not tested any so cannot tell about that.
I am on HDMI. But that wasn't the problem, the problem was that I didn't know how to use the frontpanel in order to Launch Enigma. Now the other problem is that I don't have dualboot. Spark seems to be removed from my system, but Enigma is working just fine. :)
Mate,
To boot into Spark, follow these steps:
1. Power off from rear power switch.
2. Press and hold OK button on front panel and simultaneously power on from rear switch.
3. After few seconds you will see "Forc" on front panel, now leave OK button and press CH+ button on front panel.
4. "Spar" will appear on front panel, press OK button and your receiver will boot into spark.
Here I have attached all above mentioned guides to this post for your convenience.
0/zoom I have but search with magnifier on my RC I don't have. Will try all buttons and see
I am sorry, I told you incorrect button sequence for list navigation, correct sequence is as following:
For lists (left pan): use 8 button for UP and 0/zoom button for DOWN.
Ok did it. Nice work!
In TsMedia in IPTV in Greek Iptv how you move from Greek to Cyprus? How you go up/down in IPTV Servers at left?
Yes, user and pass both are root.
For moving up and down in TS Media:
For lists (left pan): use 0/zoom button for UP and search button (with a magnifier symbol) for DOWN.
For channels (right pan): use channel up and down buttons.
(I have supposed that you are having Spark remote control with large blue transparent PORTAL button).
I try loading by usb but oled U LD........ please check again
Mate, use following method to install it successfully.
Extract this file and get the folder "back_of_e2" and copy to the root of your usb and connect it to the receiver.
Now boot into spark and go to menu > plugins and start "plugin_e2upgrade.s" plugin.
When plugin starts then press ok and go to the "back_of_e2" folder by using up down button of your remote and then press red button to select the folder.
Press red button again to start installing the Enigma2 image from that folder.
After sometime it will install successfully.
Now close the plugin and exit from the menu and then switch off your receiver and boot into Enigma2 by using front panel buttons.
I think you will understand now.
Tried to load this but no luck. It stops at a point
Install it though spark plugin "plugin_e2upgrade.s" from Spark menu>plugins.
Mates,
Today, I present here, my latest backup of OpenAR-P Enigma2 Image for Spark7111 receivers created on 31 July 2013. Main features of this backup are:
1. Emulators included: Oscam, CCCam, MgCamd, Camd3, Rucam, Wicardd
2. Latest TSMedia plugin ver 3.3 included.
3. Latest MediaPortal plugin ver 4.7.0 included.
4. Latest CoolTV Guide plugin ver 6.4 included.
5. Satellites.xml includes all satellites between 7 West and 122 East.
6. Channel lists include, Asiasat 3S (105.5E), DishTV SD (NSS6 - 95E), Intelsat 20 (68.5E), Paksat 1R (38E) and Hotbird (13E).
File Password: engineerkhan15
Screenshots:
Hi Mate,
Before getting desperate, don't forget to try OpenAR-P Image. I myself am using 7111 version of same image on my Amiko Alien SHD-8900 and its very stable.
Thanks a lot. Tested on my Amiko Alien SHD-8900 (SH4 box) with OpenAR-P Enigma2 image of 14 April 2013. The plugin is working fine, although some of the addons did not work (may be due to my location, Pakistan)
Mates,
Here is the picon pack for Amiko Alien and other Spark receivers for use in TV Wall. It includes Spark picons for Asiasat 3S (105.5E) FTA only, DishTV SD (95E), DialogTV (45E), Paksat 1R (38E) and Hotbird (13E). It contains more than 1800 large sized (204x126) picons.
How to:
1. Download and extract. Password is engineerkhan15.
2. Copy all or desired satellite folder in a USB flash drive and connect to your receiver.
3. Upload icons by going to Menu>System>Basic Setting>Miscellaneous Setting>TV Wall Setting>Load Icons From External Drive.
Mate,
I myself have tuned Paksat on my Amiko Alien SHD-8900 on Open-AR image successfully. But my receiver is with 7111 chip and I am using diseqc 1.0. I think there must be something wrong with your settings, like type of lnb etc. I would suggest you to again try OpenAR-P again and check for any error in your tuner setup/settings.