Posts by fogonero

  • NUEVA spzGIT 20/09/11

    NUEVA spzGIT 20/09/11 by team


    changelog


    Code
    - Compilation GIT SPAZE 20/09/11 
- latest Drivers públic RTi 
- Some changes in Enigma2. 
- Added optión to disactivate scanning in second plan 
- Patched Enigma2 with EPG of D+. 
- Patched Enigma2 with character correction in VFD Display. 
- Improved plugin PicturePlayer. 
- Modifications in diverse files python.





    Dear users,


    As you all know we are working on new version of the Spaz, but as the image still be published soon we decided to get a basic version based on our GIT.


    We're still working on the construction of the GIT because missing even as the branches to create plugins. Go GIT correcting our faults to be detected and we will add amendments.


    The image does not bring any of the SPAZ plugin it is basically the enigma2 base with some changes we have made.


    You who try it can change to your taste with the extra plugins you please to put.


    Meanwhile a helping hand for you with this picture, until the next release of the new RTi or SPAZ.



    . Zip file contains the following:


    - Patch.e2 (spzGIT 09/20/11)
    - AzUP 2.1.3
    - Official Tutorial FW to E2
    - IPK 0.3.2 MediaCenter (RTi)
    - Readme.txt
    - HowTo Install MC.txt


    0.3.2 How to install RTi MediaCenter


    1 - Copy via FTP the file. Ipk's in the MC folder. Zip to the / tmp AZBOX
    2 - Apply attributes 755
    3 - Start telnet session and type:


    Code
    ipkg install --force-overwrite /tmp/enigma2-plugin-extensions-mediacenteraz_0.3.2-smp8634_mipsel.ipk


    4 - Restart GUI


    This should already be working on MediaCenter in this version.


    Multiupload.com - upload your files to multiple file hosting sites!

  • Epg advice

    Quote from master G

    First i`ve heard of flashexpander, i will give it a try and let you know if it works on the Vu+Duo.



    Quote from master G

    Just installed flashexpander and see it has moved /usr/ directory to my usb.


    It has freed up some ram and coolman tv guide has now been installed to the usb device.


    Thanks for the info fogonero.

    people to do this, you should be aware that the USB hardware is always part of the box, and the installation of the Sun early in plugins is not touched, because what makes flashexpander is a link to the original installation USB device.


    This tool is very good for boxes with little RAM, especially for the 256 MB, we take off weight and speed LOT to our box.

  • Epg advice

    thanks maestro G.


    you could put in usb all plugins, if we try flashexpander plugin?, azbox_E2 I do, this plugin works vu+UNO??

  • Jumpin'Jack Flash

    Update 11.09.2011


    kernel-initramfs_2.6.18-r14.0-1.4


    Well, after others have asked about the IPKS and many have switched to the DMM experimental images where it will be built the initramfs kernel certainly not fixed, I've adenine one last time asking the kernel for all the boxes with the patch from the first side to build.


    The corresponding IPKS are now with the patch file for the image builder on the first page.


    Nevertheless, the image is now nice and slow farmer on train after the initramfs kernel seems to be fairly stable and largely bug free.


    We can not / do not want every time you build the kernel to upgrade, if the IPKS here primarily on the first page to test because if there is new version / features and not to upgrade image with the respective releaste initramfs kernel.


    LG
    gutemine



    Multiupload.com - upload your files to multiple file hosting sites!

  • OSCam build # 5775 in AZ_E2 PB VX OK card conax

    thanks gor***


    Here's the info (and files) to do it manually, in PB VX E2 OK...
    here are the details of my OSCam 1.10 b. 5775, installed from the PB support server, plus the additionally installed configuration files, too...


    It's a solo OSCam setup, i.e. OSCam is a server and a client, at the same time, no other cams are "helping out" at all!


    The main config files will be quoted and the other ones find attached, guys - they must be according to your needs!


    1) conf, user and server go to etc/tuxbox/conf folder, together with dvbapi, tiers, provid, services


    2) module goes to usr/bin/cam -> CHMOD to 755


    3) script .sh file goes to /usr/script/cam -> CHMOD to 755


    I have a Conax original smart card (OSC)...


    Make these files with Notepad++...


    Save as -> All files -> name...


    oscarm.conf:´



    oscam.server:



    oscam.user:



    In /usr/script/cam folder we have:


    oscam_1.10.sh:



    With this it should work, if you put in your subscription's correct details, plus your peers' details...

  • Firm Mediaplayer optimize OPENSAT Manual

    Firm TCK optimize OpenSAT Manual mediaplayer


    I put the manual for you to have the official Firm and you have trouble playing multimedia files (cut reproduction) avi, mkv etc .....


    Comments:


    with this utility can optimize files by removing the tireless cuts playback your media files.


    installation:
    1. Unzip the attached TCK.rar get:
    2. Copy the folder of the rar attachment PanelKGD TCK.rar in /PLUGINS
    3. Copy the TCK in the folder /PLUGINS chmod 755 to TCK.
    to launch it by telnet:


    Code
    cd /PLUGINS
./TCK




    I also attached the script to start only on a restart and you might be running TCK, without calling it by telnet.


    Enyoy

  • OSCAM Randomly Stopped Working and weird logs DM500

    I say this is something possible does not mean that is what happens to you.


    You may have someone, who is stealing the card, has entered the port and takes hold of your card. when that happens the result is constant reboots as you say. if you have done recently some line C or N may be that.


    (a friend of mine recently did that happen)


    can you do?


    Close your door. oscam reinstall everything again or nlines clines but only with your card, if not restart so that you constantly oscam is a FAKE in your box, you'll have to find out clines or nlines is.


    if that's resolved, you have to open another port difficult to decipher and speak with nlines clines and good to give new information about you.

  • Installation Manual AZbox E2. premium,premium+,elite.

    Installation Manual AZbox E2. premium,premium+,elite.


    VERY IMPORTANT. the box-router must be connected to cable and the router must have DHCP enabled.
    1 º We put on a flash drive, formatted fat32 previously, "patch.bin" folder "officialTOE2."
    2 º Turning off the receiver's back button and plug the pendrive.
    3 º on the receiver, with this change us for the new kernel we want to put him Enigma2.
    4 ° This step is done automatically, the receiver after the 3º th step will reboot and give us an IP that will be seen in display.
    5 º This IP we put in the program azup 2.1.3, we give "GO", E2 chose the firm that we want and we will get the installation to finish the receiver will make a reebot and with this we installed AZbox enigma2 from an official signing.


    Enjoy.


    thanks oscar_fl


    oscar_fl has gotten so many times and never entered AZbox in booting.


    I personally also have done a few times and no problems.

  • enigma2-plugin-extensions-oscam-dc-1106_TWinProtocol-Alfa

  • AZbox ( premium+) in Booting installation E2

    AZBOX VIA JTAG (Deco Booting dead).
    by kkaapp. thanks danilp


    According to some it is impossible to recover it, well yes you can ...


    Well, this manual is about how to recover a deco (in my case premium +) when using the RS232 Yamon method gives this result:


    serial # 2cee66e587b6925bb3cff53620687750 subid xosPe0 0x70
    xenv failed cs2
    serial # 2cee66e587b6925bb3cff53620687750 subid xenvxosPe0 0x70
    xenv failed cs2
    xenv power supply: ok
    dram0 ok (
    zboot (1) failed


    It seems that if it fails to load the zboot no longer have to use Yamon and Jtag.Vamos it.


    1 .- Materials needed:


    8 120 ohm resistors (brown-red-brown)
    1 DB25 (parallel) male
    1 piece of wire (I used the flat IDE)


    We must follow this outline:
    20-21-22-23-24-25 are bridged in parallel DB25 connector.
    It looks something like this:
    Well, now we have the cable made, just need to bypass a jumper cable or put a male and its corresponding cap R309:


    Okay, ready hardware, go with the software.


    1 st Place in the PC BIOS EPP mode parallel port.


    UBUNTU need Linux, I have downloaded the latest 11.04. In theory goes without installing it, could be used from the same CD with the TRIAL option that appears on startup when loading the CD interface ... I installed it. But you can try ...


    Well, once on linux going to prepare everything. I will leave by attaching the necessary files, but the commandos should download the single ...


    At mess, open a terminal and we put these commands:


    first we put the root user password;


    Code
    sudo passwd root


    we put our password there and then root password (if you do not install linux maybe it leave it blank and then put him to wish that you will be as root or have root directly ...)


    switched to root user;


    Code
    sudo-i


    create the folder, download and unzip the necessary files. Change * by h!! I have not put it out do not link instead of full address ....



    Now connect the receiver to the pc with the cable that we have done and will stay on ... booting ...


    continue;


    Code
    cd /usr/local/share/openocd/scripts
openocd-f-f interface/parport_dlc5.cfg -f board/azbox.cfg



    We leave this open terminal and open a new one;


    Code
    cd /usr/local/share/openocd/scripts
telnet localhost 4444


    Now within this sub-terminal telnet shows us write:


    Code
    halt
reset
reset init
Protect 0 0 last flash off
flash protect_check 0
flash info 0
shutdown


    Well, now we're going to download and decompress the file Booting.zip which is contained in the program to record the micro and the file to be programmed ...


    Code
    wget-c *ttp://download.pristavka.de/azboxhd/Booting.zip


    (cambiar * por h !!!!)



    MEGAUPLOAD - The leading online storage and file delivery service




    Code
    unzip Booting.zip


    Code
    cd Booting
make
sudo rmmod lp
sudo ./tjtag -flash:cfe /fc:104 /bypass


    (If it does not rename uppercase CFE.BIN using: mv cfe.bin CFE.BIN and rerun the last command: sudo. / Tjtag-flash: cfe / fc: 104 / bypass)


    Well, this should start to flash your memory ... I notice that it takes sooooo. I really took 145710 seconds approx. 40 hours on an AMD 800. The author of the manual I've been following it took about 29 hours ...



    Then, when you finish that and put DONE.
    Turn the switch back Azbox.
    Disconnecting the power.
    Remove the JTAG jumper.
    Remove the JTAG (I left just in case and I was not either the keypad or the knob USB upgrade menu, was removed and rular ..)
    Stick a pen with a valid patch.bin (I used the last 08)
    Format the application area
    Install patch.bin.


    Enjoy it!



    attached images.

  • Mgcamd Oscam Tring

    newcamd.list:

    Code
    CWS_INCOMING_PORT = 21000


    this port is the port to be used in newcamd server-oscam?
    ie port newcamd card tring the 10001?


    I do not use mgcamd but it is very interesting.
    is mgcamd newcamd port can use a different?
    thanks.