A correction to the manual
Posts by fogonero
-
-
for this plugin to work, you must have installed this one before.
-
do I just add the N Line in CCcam.cfg and wipe everything else or keep the boxkey in there too?
no need to put in CCcam boxkey with your client N CCcam your local server that provides OSCAM is ok. besides what you said G master, if the server oscam do not need any data to read your card boxkey the catch automatically. -
Nuevo CCcamInfoPHP svn r257
29-08-2011Here again a pure bug fix, which should no longer occur, the previously mentioned problems. The fixes that came after the initial release or already are integrated into this fix.
-
Motor azbox channel list, for models Premium, Premium Plus, Elite and Ultra HD. by body, Firm OpenSAT.
I advise you not metais or file "DVBTa" which are the body TDT nor the "antenna-list" and let yours.
1 º. Send by FTP the "DVBS" and "allchannel.dat" to /DISK2.
2 º Restart your receiver. -
I leave the same script but with modifications explained in the same script.
ultimately we can add lines caids / providers use and so not to create a oscam.srvid as big as we download from the url since CCcam.channelinfo are quite large.
before my editor used to fit my needs and leave only what I use with this script I get a srvid set to actually use it.
-
A quick way to find the net index is the mini running telnet program Attachment
It should go something like this:Code
Display Moreunlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!: No such file or directory Loading all_channel.dat ERROR: ChannelSDK_LoadNetwork:765 Fail to open '/DISK2/DVBC.dat' ERROR: ChannelSDK_LoadNetwork:765 Fail to open '/DISK2/ISDBT.dat' ERROR: ChannelSDK_LoadNetwork:765 Fail to open '/DISK2/ATSC.dat' Searching for channel 1:1058:30108... Found: Name: PORTADA Net index: 9 Frequency: 10847000 Polarity: 1 NID: 1 TID: 1058 SID: 30108
If the net index is 9, then you can include the number that comes in the configuration (grab_epg.ini file) in this section:
tuner_id refers to the tuner, the tuner satellite is not the "A" then I think we should change the value to 1. -
The TP I have is:-
- Astra 1 10847.00V DVB-S QPSK 22000 5/6
Is this correct?
My complete log was :-
AZBox[XGrabEPG]$ ./grab_epg
=== Grab_epg for the Azbox, TEST 3 ===
unlink fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!: No such file or directory
Using the ChannelSDK
**********
IMPORTANT: in case of error "mismatch version(10,9)"
try again adding the option --no-ch-sdk
**********
Loading /DISK2/all_channel.dat
ERROR: ChannelSDK_LoadNetwork:767 Fail to open '/DISK2/DVBC.dat'
ERROR: ChannelSDK_LoadNetwork:775 Fail to read networks from '/DISK2/DVBTa.
ERROR: ChannelSDK_LoadNetwork:767 Fail to open '/DISK2/ISDBT.dat'
ERROR: ChannelSDK_LoadNetwork:767 Fail to open '/DISK2/ATSC.dat'
timezonegap: 3600
=== Reading EPG...
ERROR: TVSDK_LockTuner:1084 Fail to lock tuner freq =10847000
Error: can't lock tuner
Loading /Download/test.epg to memory...
Loaded -1 entries
AZBox[XGrabEPG]$This error comes because he can not access that often because they did not have on the frequency table of the satellite. Most likely the problem comes because the satellite index does not match the one we have the majority. To verify the configuration line that has since index and then check your list of channels with the MAZ and see what is the satellite index in question, if different, you change the line configuration of the plugin.
-
Look, you have the transponder in the channel list, but what comes out is that error.
-
Core RTi 1.2_E2_Backup.MOD by Darkmantk
E2_AZbox backupMOD 1.2 by RTi Darkmantk Core v2
========================================Changelog:
-LatestDrivers-
Fix-WLanFix DVI (premium and premium +)
-StreamingFix-MediaCenter0.3.1-RTiSoftwareInstaller
- FIX CAMD Manager
-FullScreen-VideomodeAuto Changesin changed to shoutdown menu
FIX-NetworkBrowser
Pingflood in skin-Keymapby AzConcinnity-HD (Default)
-MyTubePlayer19/08/11- AzExplorer - ipkg build tools
-TechsatKeyDownloader-Channellist (DTT USA, Astra19.2E, Hotbird13E)
HD-Skin Glass16 installed as optional
-Glasssysutil
Well as promised, I brought my full backup with everything I have I got to the RTi 1.2I recommend that you back up the folder / etc/enigma2 as it is where you store the configuration settings and channel lists. And then if you want to put them in the backup.
Bring CCcam installed as standard, but is only configured for Techsat.
Some things I could not test because my deco is Elite model, but are caught GIT files for example if the WLAN operates in the GIT version should work fine here too.
The image has nothing to do with Spaz and unique plugin does not bring any of that image, we're working on it but when the time comes that I see the light of the RTi fixing things.
I modified the manual that created the RTi to explain how to install the AzUP Firm, now it will not leave the ext4 option because the current kernel does not support that format.
NOTE: This new version is heavier and I have incorporated the Skin Glass and Glass HD 16 Utility Sys and occupy these two enough memory for those who do not want these extras either the skin or the utility sys, or both will explain how must do to uninstall them.
Uninstall HD Glass Skin 16
For telnet write this:
Code:
ipkg remove enigma2-skin-hdglass16-3.16Desinstalar Glass Sys UtilsFor telnet write this:
Code:
ipkg remove enigma2-plugin-glasssysutil-3.77Recuerda that if you uninstall the Skin put before another default. The image brings the default skin AzConcinnity-HD. But I added this because there is enough people who like to use it.DOWNLOADS
Multiupload.com - upload your files to multiple file hosting sites!
MEGAUPLOAD - The leading online storage and file delivery service
http://hotfile.com/d...y_DKv2.rar.html
http://www.filesonic...MOD_by_DKv2.rar
http://depositfiles....files/fd1ul1qf1 -
as if to play, sure take the 1.6.5 will be soon and everything inside.
what I did:
I put in files chmod 644.
then gave the order:depmod-a
then turn into deep sleep, I turn back and restart box.
Then I made the two orders we're seeing and all ok, I get version 4.4.3
-
I'm not home and I can not exactly put it out if everything was ok.
repeat in the second order, get out the 4.4.3 version you should see if everything is ok.
well maybe you have not installed the drivers
Pardon my language, I use translator -
Installation Manual OSCAM Official Firm 0.9.5306
I created this manual, for those who still are with the official firmware, you can have with your oscam in deco, activate the server cccam server and make compost from your sbox, obtained for all the fruit to view it and burn it to your deco with conf.INSTALLATION OSCam_svn_build # 5352 in AZbox.
Requirement .- have a deco swap, 40-50 Mb
1 º. Download the attached zip and unzip on PC, get a folder called oscamCAS
2 º. Select the folder and transfer oscamCAS via FTP to AZbox in this directory /PLUGINS/OpenXCAS
* Once inside oscamCAS in deco, give permissions, all files to 644, except ccc_to_oscam and oscam, two to 755, as well oscamCAS folder to 755.
* Within the files:
-Oscam.conf
-Oscam.server
-Oscam.user* Oscam.conf: we just have to edit this:
Code[Cccam] port = PuertoCCcam version = 2.1.4 # which use updateInterval = 60 ignorereshare = 1 Reshare = 1 minimizecards = 0
Code[Webif] httpport = 83 httpuser = # this if you want to put a user webinterface httppwd = # the pwd of the user of the webinterface httprefresh = 60 httpallowed = 192.168.1.2-192.168.1.255 # range of devices mounted on your local network, so we will start the webinterface httphideidleclients = 0 httpreadonly = 1 * oscam.conf everything else leave it as is.
* To configure files and oscam.user oscam.server we can use the script that is inside "ccc_to_oscam."would only get your C, F and N in the file in the folder oscamCAS "CCcam.cfg" and run these commands:
also I have set in the configuration examples rar
with this we would have oscam.user oscam.server and configured with our data.
(Not recommend this, because according to the format makes the files, the server OSCAM this version, I controlled the traffic well and the end result crashed server, use the settings that I have left in the default oscam.server and oscam.user, so you you will avoid problems.) is just edit it directly with your FTP program, all parameters the same, just going by adding your data and adding blocks as you may have few readers and users, respectively.
* Other files within oscamCAS not touch it, those files once we put more in expert mode, you can edit them.
* We have module.seq cercionarmos oscamCAS that, we go to the "activation and priority setting" and start oscamCAS.
* Then reboot and look to OSCAM deco is torn, if everything went well OSCAM should be running if not start it you can see in telnet process entering its directory and running:
With a ps console and see if we have in process.* For now comment # oscamCAS (activation and priority setting), then we will put in place.
*** We will implement the following configuration in AZbox. OSCAM MultiCAS + sbox + ***
Comments:Using MultiCAS and Sbox is that the viewing and recording, the reader is not entirely OSCAM achieved.
* Prerequisite to use one of the latest versions of MultiCAS.
* Sbox read our card.
1, configuration sbox.
* Installation and configuration sbox, with a little info on the forum can have it running on your deco.
* Sbox user in putting two, one for the newcamd.cfg MultiCAS and one for OSCAM will go into the reader of Sbox of oscam.server* Sbox the start, remember you have mentioned so far OSCAM. (If you already have installed before you start commenting MultiCAS Sbox). No other EMU can be activated on boot time sbox.
2 º MultiCAS Settings:
* Install MultiCAS.
* We will use to connect to newcamd connection OSCAM.
* Rename the file newcamd.cfg example-folder which is inside MultiCAS, we will call newcamd.cfg
* We will enter into newcamd.cfg and we will delete the content that comes by default, we will use nlines allowed, ie a total of 12.
* This is the format and we will leave within newcamd.cfg, you have to put 12 more so, one for each fall / providing that you use regularly, and we have to turn in oscam.conf, which will see in the oscam.conf are those that usually use, change it to your needs:
Code:
Code
Display MoreN: 127.0.0.1 usersbox pwdsbox 30001 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30002 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30003 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30004 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30005 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30006 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30007 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30008 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30009 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30010 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30011 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 127.0.0.1 multicas pwdmulticas 30012 01 02 03 04 05 06 07 08 09 10 11 12 13 14
*store.
* May use the protocol CCcam with MultiCAS (I recommend the newcamd), only one would be to CCcam.cfg cline type: C: pwd ipdeco user port. or even both protocols.
* Edited newcamd.cfg once we enter to the menu command plugins within MultiCAS in newcamd-client, loaded with the blue button released, we all options enabled, login, emms, keep red. We go out and say connect "yes". Look in the module.seq ARE the three in this order, multicenter oscamCAS-SboxCAS.
* Now if we remove pad to oscamCAS (activation and priority setting) and we restart deco.
*** If everything is configured correctly, we will take our receiver running Sbox MultiCAS + + OSCAM ***.
*** This version I have been testing a few days and doing quite well, if you want to change it, the paradise and the binary meteis wish .***Enjoy it!
-
fixed: version 18-08-2011
In txt and html listings hours of programs out two hours late.
-
For OPENSAT Firm
What does this plugin?
Download the EPG is sent by satellite, can be loaded into memory deco (as getepg), but also optionally can be converted into various formats: text, html and xmltv.
The plugin includes actually two programs: the grab_epg, which is a command line program and is doing all the work, and can be run via telnet, for example. /-X grab_epg will record the EPG xmltv format. The other program is XGrabEPG (which is just a modified version of XGetEPG) and is the program that appears when we get into the option menu XGrabEPG plugins. Allows you to set some options and load the epg by remote control.
The program has been written from scratch, but based on other plugins to Decos (especially one named "mv") and has been careful not to miss events (which is a problem with the getepg).
Installation:
The zip file includes two files: XGrabEPG.plugin and plugins.lst. Copy these two files to the / tmp deco. Go to the Plug-ins option deco and select "Add plug-in" (red button, careful not to press the green button by mistake). Select "Install (/ tmp / plugins.lst), and finally choose XGrabEPG.
Post-installation:
The files generated by the program can be quite large, several megabytes, so it is advisable to save them to disk drive or a flash drive. After installing the plugin would have to edit the file and put grab_epg.ini output_dir option in the directory where you want to be recorded files. The default is / DATA/hdb1/EPG /. Oh by the way, the board also will have to create it by hand.
Use:
Once the directory is already created and configured, we get the option XGrabEPG Plug-ins. With the red button you can choose the files you want to believe, and some other options. Press OK to start the download. Depending on the options you have chosen will take more or less. Load the epg in memory deco (which is faster) takes 1 minute and a half to 3 minutes.
Important Note:
It is quite likely that the program fails with the error message:
ERROR: ChannelSDK_Load: version mismatch 354 (10.9) Fail to read the channel_list to '/ DISK2/all_channel.dat'
This occurs when trying to load the channel list Azbox. Apparently it only works properly if you use a recent firmware. In older firmware (like the one I use) this error occurs. To avoid this you have to uncheck "Use ChannelSDK" (this trick will not work when using the Hispasat satellite.)
Speaking of Hispasat, I have no idea if the plugin work with the Hispasat satellite. Would have to change some options in the configuration file, but still not know if it works ...
Other little things ...:
In the file specified epg.excl some channels will be ignored. Take a look at the file and if there is a channel that interests you, delete it from the list. In the file specified epg.texcl channels to be ignored when creating listings in text format and html.
►
-
Mediatomb_E2 Upnp Server by lukinario2
Upnp Server MediaTombTo have a upnp server with our AZbox e2, you can use the MediaTomb, you upload the files.
We must put the files into their appropriate folders with the permissions that the file is added.
Folder. MediaTomb goes: /To change any settings, edit the file / .mediatomb / config.xml
This folder set to share hdd / movie
Through the website: you can modify http://ip_del_deco:49154/ shared foldersIt starts with the script that goes in usr / script / Mediatomb.sh
-
First of all I want to thank newtolinux, ferdi,lfc4ever, thanks to them we could create this script and especially its creator rcm1379, which without it would not be here.
* the script does do a "check" on oscam.log on OSCAM known errors.
"not found"
"exit with signal"
"timeout"
"process does not exist"starts if we have the internet and the routes are correct.
the debug script is oscam.log.script and has tried to have a log there as full as possible.Peron my language.
you only have to put your route and call it with cron
enyoy!!!
-
thanks friend, if you see something or know something new is this thread that will be a pleasure to read you.
Thanks for everything.
-
the hand with a stop killall - 9 oscam.
I hope more than 5 minutes which is how I have the cron but I see it boots.
I'm sure the cron is running:2764 root 416 S /usr/sbin/crond-c/etc/bhcron/
just stopping it with a command is not responding??......works for you?
as you do the test?
-
my routes:
bin=/usr/bin/
logfile de oscam= /var/log/oscam.log
script=/usr/script/checkoscam.shBash
Display More#!/bin/bash founds=`tail -10 /var/log/oscam.log | grep "not found" | wc -l` founds2=`tail -10 /var/log/oscam.log | grep "exit with signal" | wc -l` founds3=`tail -20 /var/log/oscam.log | grep "timeout" | wc -l` if [ $founds -gt 3 ] || [ $founds2 -ge 1 ] || [ $founds3 -ge 1 ] then echo "Error found, restart..."; /usr/bin/killall -9 oscam /usr/bin/oscam & fi exit
this is the script I've posted, you see something wrong?
Please keep me patience.
Thank you