Posts by jenseneverest

Happy Christmas everyone, all the best for '26

Quote from ammarbary

Stream Relay channels are still not supported

That issue will probably be resolved with the latest openATV images and there new softCSA changes

Quote

SoftCSA for Enigma2 – Test Started!

What is SoftCSA?

SoftCSA adds native software descrambling to Enigma2 for channels encrypted with Algorithm 3 (CSA-ALT). These channels cannot be descrambled by the receiver’s hardware descrambler and previously had to be handled via the StreamRelay workaround in OSCam.

SoftCSA integrates descrambling directly into Enigma2: the encrypted transport stream is received, descrambled in software, and seamlessly passed on to the decoders. Result: faster zapping, better performance, and full feature support.

What does SoftCSA bring?

Benefits compared to StreamRelay

• Channel switching: StreamRelay = Delayed (HTTP overhead) | SoftCSA = Fast (direct)
• Timeshift: StreamRelay = Limited | SoftCSA = Fully working
• Recordings: StreamRelay = Complicated | SoftCSA = Like normal channels
• Multi-tuner: StreamRelay = Consumes capacity | SoftCSA = No extra overhead
• Audio track selection: StreamRelay = Problematic | SoftCSA = Works normally
• EPG/Subtitles: StreamRelay = Partly faulty | SoftCSA = Complete
• FCC: StreamRelay = Not possible | SoftCSA = Supported

Technical highlights

• Transparent integration: For the user, a SoftCSA channel behaves like any other channel
• Automatic detection: OSCam reports the algorithm; Enigma2 enables SoftCSA when needed
• Hardware decoder: The box’s AV decoder is still used – only descrambling is done in software
• Cross-platform: Tested on Broadcom, HiSilicon, and AMLogic chipsets
• System information: SoftCSA status is shown in Enigma2 system information
• Skin integration: Optionally show a “SoftCSA” indicator in the infobar

Display More

There is a thread of in the VIP section: RE: new SoftCSA Support with OpenATV

Great work with this plugin

This is great news, thanks to all involved with the softCSA work

Quote from Lendar

have a Vu+ Duo 4K SE receiver that is currently bricked.

How exactly do you mean bricked ? How did it get bricked ??

Is anything displayed on your TV from the HDMI ? - if so it is NOT bricked.

Are the USB ports powered ?

Dose the ethernet port light up ?

Be careful to only flash the correct bootloader .bin

Hi all,

just a heads up that you can expect some down time for a few days, possibly a week while we move house,

will get back up and running a soon as possible.....at this stage i dont even have a dish at the new place.

moved back to general e2 plugins, thanks ostende

Can someone please add the ipk to the forum please..... im not a fan of distant links to far away places

Quote from KiddaC

Most are trying to link to dead sources. Very few are self hosted on the providers own servers

Would it be possible to rather use locally hosted SNP picons off the STB ?

TBH im personally not bothered by picons when it comes to IPTV, the channel names vary so much you would have to have very cleverly names picons or logic to fix poorly formed channel names - either way sounds like a total shit show to me.

So far no issues for me with py2

Indeed playlists are greatly improved

What are you tying to achieve ?

See some similar threads:

Thread

FBC tuner

I have a question. If I have a FBC tuner, can I record a tvshow while Im watching another tvshow/movie?

jocke90s

Mar 15th 2024

Article

Brief description of an FBC tuner

Receivers like Vu Solo4K, Vu Ultimo 4K, Gigablue Quad 4K have FBC tuners.


Please do not assume you can only use Unicable with FBC tuners. The two technologies are separate and independent. Yes, you will achieve more if you combine the two.


Brief description of an FBC tuner:




A satellite FBC unit/module consists of two tuners with physical connections and 6 leaf tuners without physical connections.


The two physical connections can have different signal source. E.g. One motorised, one…

abu baniaz

Jan 6th 2019

Enigma2 Tuner Setup - Linux Satellite Support Community

www.linuxsat-support.com

Is the any NA site's that post feeds with the biss keys ??

here is a few more feeds, all of these sats are way out of range for me

so Its a copy paste from the satuniverse forum

121 West 4100 V 30000
CW: 1B 52 D2 3F 3A C4 15 13
CW: 25 B1 3A 10 4C 21 52 BF
CW: 34 C1 B5 AA C2 13 4A 1F


AsiaSat 5 - 100.5 E - CBand
TP : 4111 H 15000
DVB S2 - 8PSK - 1080i - MPEG-2 - 4:2:0
PMT PID: 100, SID: 1 @ WWE PLE (Service Provider)
CW : 34 C1 B5 AA C2 13 4A 1F
WWE Night Of Champions 2025


100.5°E
3914 V 7200
ID : ENC 21
DVB-S2 8PSK 4:2:0 1080i
SID : 1
Recurring CW : 85 A2 47 6E 13 15 E3 0B

Quote from izu-sama1

but the ESPN and WWE wildfeeds don't open

Not many users here can receive signal on 99w we are way out of range, there were feeds on several sats for WWE last night, i guess no one was about to post them to the forum.

100.5°E
3914 V 7200
ID : ENC 21
DVB-S2 8PSK 4:2:0 1080i
CW: 85 A2 47 6E 13 15 E3 0B

36E
11474 H 30000
DVB-S2 4:2:2 8PSK
ID WWE P1S1P
ID: WWE P1S2P
WWE SmackDown & Night of Champions in Riyadh, Saudi Arabia
CW: 9E FB 58 F1 F3 1D 00 10

36E
11674 H 30000
DVB-S2 4:2:2 8PSK
ID: SVC 1 Trk Prodn MP4 10B
ID: Enc8 MP4 422 10B 25M-NetRtn (Netflix Feed)
CW: 9E FB 58 F1 F3 1D 00 10


7E
11011 V 7200
DVB-S2 4:2:0 8PSK
ID: IMG A EU
CW: 12 3C AA F8 14 22 A3 D9

16E
11011 V 30000
DVB-S2 4:2:2 8PSK
ID: WWE P2S1P
ID: WWE P2S2P
CW: 9E FB 58 F1 F3 1D 00 10

Quote from KiddaC

yep. I think i broke it again ;)

clearly not an easy task with all the various possibilities, you will get there

Quote from pinokio0

Is there a website that tests hacked lines?

Anything that is shared on websites/ forums,/telegram etc etc with be also reshared, quickly a stalker URL becomes the target of several hackers, possibly hundred's of them.... eventually if the "provider" actually cares about there "customers" they change URL, and the same old process starts all over again.

Nearly all of these stalker providers are resharing hacked IPTV anyways.

If you want to check a large list of hacked lines look at AJ panel, it quickly goes through the list and makes a new list of valid accounts. Or use the blue button on estalker.

Quote from KiddaC

users will add about 100 lines. the majority of them will be dead. So I think the blue auto delete button

100 % - i love the blue button

Quote from slpx

This is sat tuner

What satellite and channel, there is a long standing issue with some AVC codecs

Quote from Sir Osis

it scans 28.2 and finds 705 services.

Good stuff, at least we now know the cables / dish and tuner itself are working.

I would imagine the tuners set up would need adjusting for ABM to realise it only has one sat tuner to use, for to update its providers.

As EnoSat said above, Post some screenshots / pics of your tuner setup and ABM settings,

rather than us trying to guess where the issue is, we may be able to spot a setting that just needs a tweak.

Quote from Sir Osis

28.2

Scan of Freesat UK,Sky UK and Sky Ireland all failed on Autobouquets Maker.

Been using Zgemmas since 2016 and this is the most difficult one I've encountered.

Try a manual scan first. I am not familiar with the h17, dose it have blind scan ? If so try that as well.

If you have connected up your cables correctly and setup your tuner correctly you should be able to scan 28.2.

Once a manual scan picks up channels, then try ABM again.

Quote from Sir Osis

The latest Open ATV image recognised the sat tuner but failed to download any channels.

What do you mean "download" ? Dose is manually scan channels ? What satellite ?

Quote from Mahmoud Hussein

Can they share with us the screen template for this plugin to import it in XDREAMY skin? The py file is encrypted.

am i missing something ? nothing looks to be encrypted to me....see here: https://github.com/oe-alliance…/master/EPGTranslator/src

you may get some more interest in doing so if you explained what this adds to oscam ? IE what is the end goal here ??