any upload recoard from bbc from yersterday ?
yes see the text file attached for the links, will do the others tomorrow when i get a chance
any upload recoard from bbc from yersterday ?
yes see the text file attached for the links, will do the others tomorrow when i get a chance
Display MoreHello !
kashmir I`m using centaury for 2 tuners in dream920 so far no problem
I changed system now 15 in 1 and so far good (at least there is picture - I don`t know how the diseqc impacts on signal quality, have to check) - can`t see any problems... (I need to do some fine adjusting because west sats have weaker signal)
very windy here ....
70mph wind is not the time to be up a ladder, your getting there
Display Moremuch very
https://www.svtplay.se/kanaler/svt1
20:00 time of sweden
also today svt 1 will be live in sweden live song from abba
Will get that as well
Will do, will upload the raw file as a .zip when done, and i get a chance.
Rather than blindly copy and pasting someone else's file, it is far better to understand what that file actually dose and what you can change in it, and why.
Oscam comes with a full wiki, see here for details:
the problem is not just caused by the pluginYou may have been banned from IPTV after multiple tests.
Usually the ban issue is a temporary problem.
No, firstly I am a reseller with my own panel and 2nd yesterday I tested my other VU Zero4k,
today a different one and a Gigablue i.e. a different MAC address
So your saying you are a pay server ? Is that correct ??
I like to use the OpenBH 5.4 image, so removing that plugin is a shame
Well it's upto the plugin author what he does, it's a closed source plugin, so nothing we can do to make it work.
He's chosen to add a feature that only 1 image team has added and therefore made it incompatible with all other images, that's his choice.
support has been added to the plugin for BH and Vix
good.
As I am a nordvpn subscriber, I would like to ask someone if they know how to configure the nordvpn connector in the plugin, in the box, or in the dcc, nordvpn connector through confg. so I can enter my username and pass, any manual would be appreciated
You can use your remote control, see the first page of this thread
Guys there is no support for pay servers on this forum.
And it seems to be down again!
yes down for now
What could possibly urgent with an STB lol
Directly above your last message is a link to a pretty comprehensive setup guide.
Take some time to read the forum and understand the basics, no one will spoon feed you.
After entering the router's IP address and oscam port, everything is active.
My card is currently in the decoder, should I connect the reader to the router's USB port and move the card there? I understand that if we insert the card into the router's USB reader, it will not receive further permissions because it does not have access to the satellite signal. How will this work? Will this be possible through appropriate entries in OSCAM?
Can you help me configure OSCAM so that everything works? :)
The updates you refer to are EMM's, as far as i am aware, they are only active on the satellite feed, they update your cards entitlements......
So you will have to update entitlements at some point by putting the card back into a server with a satellite feed...... probably once a month, possibly more, possibly less,
i am not sure with your card.....
So as you can see, in your case it is probably a better idea to not use the router at all, instead use an STB like you are currently.
There is ways of sharing EMM's from other servers that have the same card, but why do that.... when you can simply do it yourself ?
Okay that's a good start, Is oscam running on the router ? Do you have the web interface working ? Dose your card initialise ?
If so..... then your question just becomes a normal oscam configuration.
You have a lot going on here.
1. you need an openWRT router
2. you need an oscam build for that router
3. you will need a compatible usb card reader for that router - what caid is your card ?
The configs would be very similar to what you currently do, but again there is many options do this.
I did not updated source to support Sky UK ... The support only with my compile binaries files. Because I have added patch to toolchains files only !!
Your build (on post 1) doesn't work for UK icam.
I just built it from your public git, and changed the 1 line that needs changing and that build works.
Did you send a pull request bud ?
That might be a reason I`m not getting a picture at all on corners ? I guess...
Yes i would say so. One degree out at the centre point would be a lot more at either end of the arc.
I know bubble is not ideal but I did all myself (not a pro... was hard anyway lol)
That is by far the most important part of the job !!
Slow down and get that absolutely perfect before doing anything. The way you are checking it in the 2nd picture is not correct.
Remove the dish and measure just the bracket that the dish mounts to. Again this 100 thousand percent MUST be perfectly aligned.
You will find the whole job much easier if working with a level bracket to begin with, i can not stress this enough.
I moved your posts to a new thread so we can to the bottom of this
Try this, select a FTA channel like BBC1 and reboot your STB
Once rebooted Select discovery SD (the non icam channel you referred to)
Dose it clear ? Post your oscam log on that channel
I dont know if openpli ever implemented those changes to the Dev image, even though the idea actually came from the Pli team.
We had a whole long thread on it last year.....im pretty sure all the latest OE alliance images have that changes.
see here for detail
I dont want to go too far off topic here on the oscam thread, but i will say it is not an oscam issue, it is a channel list issue.