Posts by musogeek

ah yes your one is wired - would still work I would imagine - but a bit of a bummer sure you would have been better with a wireless!

I have the one you was supposed to order! - there is nothing to set up really - If it is like the keysonic 540 rf then you have a little white button on the USB receiver which after plugging in, you need to press, and then press the Fn button on the keyboard, restart GUI and it works. Couldn't say if your one would work, but I have 2 USB keyboards and they both work so they are well supported.

to check this further you can try in tuner config to disable one tuner and leave the other one enabled - for example if when you are watching telly and this is fine and you are using tuner A - try disabling this tuner leaving tuner B enabled. If tuner B is working then you have ruled out an issue with the tuner

possibly is the issue then - have you looked at your tuner configuration to see that both tuners are as they should and checked the connections?

if that is the case then i am wondering if it is more to to with a tuner config issue, because if you try to record from the channel you are watching it records. Are you on a twin tuner setup?

So when you do a manual recording it works and records to /hdd/movie ? and when you set up autotimer it sets it up as a future event to record in /hdd/movie ? if you set up a recording without using the autotimer does this do the same and set up to record on the same path?- I assume the time and date are set correctly? When you go to watch the recorded items, it is set up from /hdd/movie and the manual recordings are there?

Another thing is it could be trying to record from a tuner or service that isn't working

In the timer events that are set up by the autotimer, do the recording paths match that of your HDD?

Not sure what could have caused it but a coulple of things to check would be the hard drive - maybe try to record something manually to see if this works, also look at your timer events to make sure autotimer is polling correctly and the HDD path is as it should be.

It could affect it if you are getting your EPG from the internet (rytec etc) rather than on air, but so long as your receiver is still connected to the net then it wouldn't be causing the issue if it is still getting the EPG updates.

If you have more than a single LNB on a motorised dish you can record one channel while watching another, but only if it is on the same satellite. You can watch a channel and record another on the same transponder on a single tuner setup.

Having no problems streaming on NAS - select media player in menu then browse to the file you want to play, then press play or your green button. If you are pressing the 'ok' button on your remote that won't work 'cause it just puts the file in your playlist. To switch to playlist press menu and number 2 (switch to playlist)

Are you actually seeing the files on your Duo or are they just there but not playing?

On Vu+ you have an audio button on your remote as glen said often due to audio track. Also menu/setup/system/av settings - various audio/video options. Try messing with these - probably something simple - If it is an HD channel there are often more than one Audio track and one might have a carrier but no audio.

Now I am able to answer this question I will, this is for Black Hole on VU+ Duo so would imagine will work for you. The Autotimer can be installed on Black Hole by Menu - Setup - Manage Extentions - (wait while updates catalogue), then select 'Recordings' - select AutoTimer, and then green to install.

This works perfectly with CoolTV Guide, to install this, press Green to access Green Panel, then press yellow, and select Addons Download Manager, Select Black Hole Plugins, then select Cool Tv Guide v5.5.0 to install.

Restart GUI, then to access the Cool TV Guide, you need a long Blue Button press, then for example select Cool TV Guide (this uses epg information already stored on your reveiver, so if you are using CrossEPG you still use this to update EPG). On the EPG channel and timeline screen, once you have found the service you want, you can do a long Green Button press to send the event to your AutoTimer, where you have further options to set the parameters for that programme. You can tell it to require the description to be unique for example, which means if if finds something that it thinks has been recorded before, it will not send it to the timer. This isn't foolproof where different episodes have the same description. When you exit AutoTimer it prompts you to check, select yes as this converts the selection to timer events, if you select no it will wait until the next polling time as defined in the settings.

After installing AutoTimer, you should also set it up by accessing it in the plugins menu, and select it to poll (send selections to timer) and how often, and set other options as needed.

Took me a while to get this working, but was important so I was always going to get there!

You do need to be using Oscam to get Boxnation, and it isn't as hard as you might think getting Oscam set up as a server, while making sure that only the lines where Boxnation is working are serving the requests. Oscam isn't great as a server because it does things it shouldn't and will probably annoy your peers, unless you are only sharing local cards and not hops. One way to go about it is to set up a dedicated CCcam server on a PC and then use the line where Boxnation works on Oscam. There are other channels like this, such as PickTV. Whatever you decide to do the answers are already here, and sure there will be other ways around it:smile:

Is the Android platform really suited for this purpose? I bet it still thinks it is a Phone like my Smart TV device does - I would imagine it is client only. If I am wrong then that would mean there would be something out there that could allow a server to be run on my tablet - now that would be cool!!

Nothing in your config that will stop EMMs updating locally - if you want to use clients to update EMMs then you can change your fline from

f: User1 pass1 1 0 0 { 0:0:1 }

to

f: User1 pass1 1 0 [COLOR='#FF0000']1[/COLOR] { 0:0:1 }

the red highlighted number is what allows your card to receive EMM updates from any clients

Of course that is supposing your card can be updated in CCcam, and it has been suggested that maybe it can't - if not then Oscam is usually very good at this!

wouldn't know what you are missing if we dont know what you have already got:feel_good:
Post here your CCcam.cfg file blanking out sensitive stuff like ip addys passwords and ports - quick look in google suggests can update in CCcam - but sure someone can confirm it here at some point!

These issues have been ongoing for a while, and has been blamed on a server issue, which is odd considering other receivers can cope with the same thing. The only way I got it working properly was internally. Basically I had Oscam running as a server and I created a a local share to the EagleBox from my reshares on the server. I then had to restrict the server to only allow certain CAIDs and services to work for the local share using the oscam.services function. I don't think what I did to get it to work is practical to anyone really! I think the problem is the ECM handling is all over the place and it can't latch on to anything for any length of time.

If you are like me, then you might want to get everything that can work to work, if only for the sake of it. Problem is that if what you are trying to do is only something that could be a good tool for someone who is trying to set up a payserver, then not many people here will be willing to share that information with you, and if they did, that information would be removed. The information we share on this forum is for the benefit of the Hobby, not to the detriment.

Information for BETA Image Gigablue 800SE (11/02/2012)

Image Information

Facts about the image:

As we invent so that RAD is not new and there are already great images for the receiver, we have the basics already Adapted from some open class teams.

We would like here to thank you for your ever-class work
what have you done in the past and what you have in the future
all makes. Without your homework and use there would be no OpenAAF image.

Thanks goes to:

OpenPLi team:
For the basic concept and great integration of hardware models
openVix team:
For the GUI modding and feature concept and the many small interesting ideas
openembedded:
Without the build environment, would not have been possible
Opendreambox:
For the GUI
eopenplugins:
This idea we have received with joy when we are once so far is also what one of us.

OpenAAF Image content:

Skin (DMConcinnity HD Mod Skin)
Lite Skin (DMConcinnity HD Mod Skin)
OpenAAF Panel
Permanent timeshift
Media Player
WebIf Mod
Keymap selection (standard, own, neutrino follows)
HDMI CEC
DVD player
Own plugin Feed
Blue Panel

GUI opacity altered
Swap Manager
PiconsAstra 19.2 and the German-language channels on Hotbird 13.0

Current Settings Astra 19.2 and Hotbird 13.0, 23 and 28 degrees
"Cool EPG" series
WLAN driver (coming soon)

Auto Timer
and much more ...

AAF specials:

Skin and normal skin in the Lite menu selectable (including 2nd infobar)
Online update package with display
Media Player in WebIf
Softcampanel in WebIf
Own feed (online updates)
Software Manager integrates complete (full backup, secure settings, etc.)
Setting the key assignment
and much more ..

Standard color keys:

Blue Key short: Blue Panel
Blue Key length:
Red Key long: When enabled, the panel Softcam
Yellow Key short shift (default) / audio settings
Yellow Key length:
Green Key short option channels where available, or extensions
Green Key length: aspect ratio (aspect ratio)

Hardware:
Image available for the following box:

Gigablue 800se
Gigablue 800solo (comes with the release image, only the first in the Beta Test SE)

Software:

Based on the basis of OpenPLi / openVix / opendreambox Fork as a separate
thus will be able to perform their own customizations and
implement our knowledge in the SH4 Mipsel environment.

Known GUI enhancements and adjustments.

Deployment:

Own feed with appropriate plug-ins will be ready at the beginning of the image.

The team:

Development
AAF DEV team: Special thanks goes to Captain, Black 64 and babsy98

Beta Testing
AAF beta team: Special thanks goes to Janojano, hu***, King Grave and dridrudradro

Graphics and Design: Xup

Quality Control: neipe

Skins: Speedy1 and Krauss

Thank you to everyone who helped!

! Attention always use latest bootloader!

INFO HBBTV does not exist for the GIGABLUE not openAAF with the image if your image is seen that because the image is also available for other boxes.

Open Issues

Wireless Driver
LED control
LED flashes when recording
Image backup is not installed
FB buttons are not all right!

This is a BETA image, we would appreciate if you can find the time and it installed for TEST, we always bring back online updates of the closest in time, therefore time to time try