seems to me the provider ID you need to use is '03FD6C'
Where you have your provider id (ident) set as '000000', try changing it to 03FD6C
in other words- ident = 0640:000000 change to ident = 0640:03FD6C
and in newcamd setting - port = 9000@0640:000000 change to port = 9000@0640:03FD6C
probably something to do with the file structure - make sure the USB stick is formatted first, and then unzip keeping the directory structure of the original zip file, in other words, when you unzip make sure it doesn't create an extra folder, and if it does, don't copy the extra folder, copy instead the unzipped folder that it contains. The folder that goes on the USB stick should be 'et9000' and inside this folder there should be the bootloader files.
you got it:scarf:
this might be a good place to start before you do a reflash - a couple of tutorials that can help - sure someone with this receiver will be able to give a bit more insight
clarke-tech-xtrend-tutorials
Try removing any devices (usb drives, HIDs etc) connected to the receiver then try to reboot. Maybe even try to remove the internal HDD if there is one connected and try again. If it reboots, the issue will be something to do with maybe a bad device or corrupt drive causing it to freeze on boot. If it still doesn't work and you can't FTP in the box, then you might have to reflash, and you will have learned a lesson that it is good to back up your image often!
Is there any reason why you would want to use puppy? - never used this myself but as a pointer, if you are looking to get CCcam to work on a light linux install (ie on a netbook for example) - then I had no issues getting it to work on Ubuntu 10.10 Netbook Remix, and this was installed from a live CD to a USB. It installs the same way as it would on the full Ubuntu install. I am sure there are forums around specifically for Puppy that will give you more info on things such as directory structure and navigation, root access etc, but if you want things set up quicker then you might want to go with Ubuntu as the install script works!
Renamed it for you- reluctantly, thought it was a great title for a thread:music:
You can get your valid sly card to work in the Vu+ no problem at all. If this is all you want to do then it is easier than you think. If you install TSpanel as described here, you can download a softcam that is already taylored to your needs.
no problems for me - look at the 'quick links' tab near the top middle and see if that has anything in where you can re enable anything you have disabled.
Surely you only have your sharing port open, which you can choose as whatever you want. Port 16001, 8888, 21, 80, and whatever else you might use on your own network is in your network only, so long as you have only opened the sharing port on your router that you are using for sharing. The default sharing port is 12000 but most of us change this anyway to whatever we want. If you only have this port open on your router then you have nothing to worry about with other ports. If you do go opening up your ports on your router just because it is used internally, then you are asking for trouble, and I mean from hackers, not your provider.
It is very simple - just download the image, unpack, and there are three files- vmlinux.gz, burn.bat, and rootfs.img. just put these straight on the root of a formatted USB flash drive. Place the USB flash drive in the USB port at the back, switch the GigaBlue off and on, and wait about half an hour. The front LED will tell you that it is loading and will count up to 100 a couple of times, and just make sure when it has been installed you remove the flash drive before doing any full restart.
Not sure you have bricked it, there is always a reflash - When I used to mess with things more, it is something I got used to doing. When you are editing stuff there is always the possibility that things will go wrong so it is important that you back things up if you don't want to start from scratch. It isn't that bad starting from scratch and once you get used to it it begins to take minutes rather than hours!
If you have changed something, you need to know what you have changed to put it right - if you are on a boot loop you still might be able to FTP into your receiver to undo anything you have done. Also 'cause you were messing with networks and drives, try to reboot without any drives, devices or networks attached.
But if all else fails, then it might be best and quicker to start from the beginning!
If you mean you want to log in using FTP from outside your local network then you would have to make sure that you have opened the FTP port 21 on your router (forward it to your server's local IP on the router the same way you forwarded the sharing port). If you have a dns address use this as address (or IP address if it is static), your server's username, password, and port 21. make sure you have a strong password.
I take it you are sharing your card with 1 reshare? Any more than that then it would be asking for trouble. Depending on the size of the servers of the people you are sharing with, there could be a lot of people using your card anyhow, which would cause issues. Have you monitored your server during the 3pms to see how it is going? Maybe if you disable reshares maybe for one saturday at 3pm you might see a difference. I think the problems with Tring recently would mean more people are looking at alternatives.
great - i thought i must be doing this right, considering i am still married:moneygrubber:
ecmwhitelist format is incorrect format so would have been inactive and ineffective, so channels would be clearing regardless as all ECM lengths would be accepted.
It should be;
ecmwhitelist = 0500@042400:52,57;0500@042410:52,57;0500@FFF920:52,57re entitlement updates, is your server in the same place as your receiver, or is it on a PC?
Press the Green button, then the Yellow button, then scroll down to 'Addons Uninstall Panel', or use tspanel to uninstall - ('menu,tspanel,Uninstaller'), or another way is to ftp into the box and delete the specific plugin folder - which can usually be found in /usr/lib/enigma2/python/Plugins/Extensions - remember if you do it this way - best do a backup!
whether you should mount nfs or cifs depends on the NAS drive you are accessing. If you are accessing a Windows share, then it would usually be CIFS - however a lot of NAS shares are NFS - so best checking - for example I have an Iomega iConnect and I have to mount this as CIFS. If you are unsure try both.
Information for BETA Image Gigablue 800SE (02/20/2012)
Image Information
Facts about the image:
As we invent so that RAD is not new and there are already great images for the receiver, we have the basics already Adapted from some open class teams.
We would like here to thank you for your ever-class work
what have you done in the past and what you have in the future
all makes. Without your homework and use there would be no OpenAAF image.
Thanks goes to:
OpenPLi team:
For the basic concept and great integration of hardware models
openVix team:
For the GUI modding and feature concept and the many small interesting ideas
openembedded:
Without the build environment, would not have been possible
Opendreambox:
For the GUI
eopenplugins:
This idea we have received with joy when we are once so far is also what one of us.
OpenAAF Image content:
Skin (DMConcinnity HD Mod Skin)
Lite Skin (DMConcinnity HD Mod Skin)
OpenAAF Panel
Permanent timeshift
Media Player
WebIf Mod
Keymap selection (Standard, Custom, neutrino follows)
HDMI CEC
DVD player
Own plugin Feed
Blue Panel
GUI opacity altered
Swap Manager
PiconsAstra 19.2 and the German-language channels on Hotbird 13.0
Current Settings Astra 19.2 and Hotbird 13.0, 23 and 28 degrees
"Cool EPG" series
WLAN driver (coming soon)
Auto Timer
and much more ...
AAF specials:
Skin and normal skin in the Lite menu selectable (including 2nd infobar)
Online update package with display
Media Player in WebIf
Softcampanel in WebIf
Own feed (online updates)
Software Manager integrates complete (full backup, secure settings, etc.)
Setting the key assignment
and much more ..
Standard color keys:
Blue Key short: Blue Panel
Blue Key length:
Red Key long: When enabled, the panel Softcam
Yellow Key short shift (default) / audio settings
Yellow Key length:
Green Key short option channels where available, or extensions
Green Key length: aspect ratio (aspect ratio)
Hardware:
Image available for the following box:
Gigablue 800se
Gigablue 800solo (comes with the release image, only the first in the Beta Test SE)
Software:
Based on the basis of OpenPLi / openVix / opendreambox Fork as a separate
thus will be able to perform their own customizations and
implement our knowledge in the SH4 Mipsel environment.
Known GUI enhancements and adjustments.
Deployment:
Own feed with appropriate plug-ins will be ready at the beginning of the image.
The team:
Development
AAF DEV team: Special thanks goes to Captain, Black 64 and babsy98
Beta Testing
AAF beta team: Special thanks goes to Janojano, hu***, King Grave and dridrudradro
Graphics and Design: Xup
Quality Control: neipe
Skins: Speedy1 and Krauss
Thank you to everyone who helped!
! Attention always use latest bootloader!
INFO HBBTV does not exist for the GIGABLUE not openAAF with the image if your image is seen that because the image is also available for other boxes.
Open Issues
Wireless Driver
LED control
LED flashes when recording
Image backup is not installed
FB buttons are not all right!
This is a BETA image, we would appreciate if you can find the time and it installed for TEST, we always bring back online updates of the closest in time every now and then try
