Posts by tomthered

I would have gone for Hyperion 4. Its based on Openpli like Graterlia but is much easier to use. Your reflash depends on where it is going to. Into Nand you will need to start from scratch, otherwise its a case of burning the image from within the Blue Panel onto USB or Hard drive. If its usb you will see sdb1 in Install Manager at the top. At the bottom you need to search for your image which you will have transferred to the box by ftp. DCC will allow you to do this. Once you have set up what you want just choose install and wait untiul finished then reboot into USB1 and it should boot up for you. Once done make a backup of how you have set it up in case it goes wrong in the future, its easier to reinstall.

Tinky2189 it probably needs a reflash as it sounds like the image is corrupt. However you need to open your own thread as this relates to something else. This will ensure you get all the help in a thread of your own which is specific to your problem. When you do open your own thread put in it what image you trying to load and is it to Nand memory, USB or Hard drive? You only have 2 posts which suggests you are new so you do need to read a lot. I had this issue several times and usually found it was a bad flash of the image.

I am running a Vu Solo 2 with Vix image Apollo 8. Upgraded to TSmedia 7.7 after reading some comments on here, but says "unable to get stream link" when I go into 1channel and choose a Genre and a link. This happens no matter what links I choose. I know it is not 1channel or my proxy because standalone 1channel works. Any ideas what is causing this please?

EDIT further to this tried the other links like Glomovies and Alluc and none work. Yet I know Glomovies works on my HTPC. Would welcome any help guys.

Whats the name of your image as the link just goes to doing a post to reply. Is it Nebula, Hyerion what? Normally you have to download the Oscam file which should include the Oscan Config and Oscam server file but would need to know your image to direct you more.

Couldn't agree more, even with proxy I only seem to get 2 or 3 links. On movies I can only get Gorillavid and one or two others. If anyone could advise that would be great.

Does seem strange as a mate of mine runs a Dreambox and a Venton HD2 and can only get same as me. Which provider do you use or do you use a proxy to get the service?

Further to this have downloaded 1channel standalone, version was dated 15/05/14 and this has some different links that work for the same film. Very weird indeed. Would anyone know why this is please?

Hi I have a Vu Solo 2 running Vix Apollo 8. I have the latest TSmedia version 7.5 but cannot get any streams to load when I go into 1 Channel. Have tried the movies and then action but it always says "unable to get video stream". I have it proxied and have checked my proxy by using a browser to go to it. Now this shows every link comes up with a 404 error file not found. I am with one of the big six so have to use a proxy but am stuck now.

Have I missed something or does anyone have an idea how to solve this please?

EDIT - strange - I have just booted up my Nbox 5800SX, ran the same TSmedia 7.5 on there and 1 Channel works fine when it links to two of the links but the same two on the Vu Solo won't work. In addition they don't work through Windows 8 on Chrome when accessing my web page via Proxy to Primewire. Is there a reason for this?

mal00n if you join the PKTeam forums then I would imagine if you speak polish it would be no problem. How you would get it I have no idea, sorry.

@danielleg you are in the Hyperion 4 thread and your flashed image is OpenPLI from Bloto22.. How have you found the OpenPLI for plugins etc??

buc61b you can download the actual image from the PKTeam forum but you have to be a member and will need to use a translator as its in Polish. See here:-- hxxp://pkteam.pl/viewtopic.php?f=93&t=6268&sid=38834a30423b37f4bf65cfd6342b2c62

i think Glasgow is a bit far for me to drive as I live near to Lymm in Cheshire!! LOL. If we go to PM we can decide payment method and postage etc. We could also exchange phone numbers to discuss this further. As I am at work today I may not be instantly available, however, have sent you a PM to start the ball rolling. Are you contactable by phone during the day? Regrettably as I work within a customer service field we are not allowed mobiles to conform with card industry PCI compliance as we have access to customer account data.

Beefy would you accept £170 delivered due to the scratch? failing that where are you for pickup?

any pics or specs of the box please? Where are you for collection if possible?

you have to use a standalone program like putty to telnet into it. Bloto22 did this because so many people are unconsciously change stuff ithrough Telnet by accident and knackering their images up. Have a look at his other image posts, I am fairly certain he mentions this.

Then there must be a problem with your image as it doesn't happen to others. I would redo the image onto USB and try that, see it it resolves your image problems

when he posts these updates they are not test or beta versions, only 6 was a test, the 6.6 version is full and stable

baisha it is to do with the limited amount of memory in Nand. This version of Hyperion 4 maxes out the memory so you are better running it from USB. There are plenty of guides on here.

nice tutorial now got movie4k cheers :)

Quote from nbox5800s

i have dvbt for rte ireland, i cant put any image on my box now though what ever i did it wrecked it up no led lights come on front panel only hear the hardrive, i think i have it bricked.

You might need to ask someone to look at it. On here am not sure whether Bloto22 can help. Am sure it may be a simple fix.

Quote from netguy

how come my sis sly ci hd ect working fine she has sly pck, we all get same from satilite dont we

its possible they have found a way of pairing the HD channel allocation to the sly boxes