Posts by radicaldoc

    hi guys i urgently need a 2.5" power(4 pin) and sata cable for my solo 2 can someone tell me where i can get one please and what is best USB wifi for it i had the VU+ one but wasn't very reliable..thanks :Cool_Santa:

    on which sat platform do you get this bud?
    I´ve only ever seen this happen on the 27.5w uk channels trying to decode the channel..
    can´t see the connection with epg..


    Yep it is on 27.5w but only with the new 5 i have just done i have not had it on any of my other channels only 5 so i am trying to find out what is causing it. As the channel is clearing fine and i have no problems with it at all except this ..
    So do you know what is causing it??


    well here i go again must be the 20th time LOL thanks for this great Tut but i fell over on the first part i dreaambox control center wont get directory of my box so i am going back to my way to try again thanks






    :good morning1:



    Well i did it yippeee.... ( on a sad note i have one problem :( i get a note coming on screen saying something like ( service invalid (timeout reading PMT) ) the problem is it stays on screen and doesn't go off which could be a problem if i am recording something while i am out..
    any ideas????


    - - - Updated - - -


    one other thing my bouquets list is huge how can i change it to just the two i use 27.5w and 28.2 e ?? and delete the rest as it is massive.. thanks


    Big thanks for that i am not good at this sort of thing but i will try to do it. although i usually screw it up....
    so i am just going to copy these setting to my lamebd
    4540:0cfdace7:1000:0001:25:0
    Channel 5 HD
    p:BBC,c:001901,c:031901,c:050001,c:121902,C:2600,f:4
    upload it back and then just restart it??
    don't i have to add something somewhere else as well as this or is that it??
    my problem is that because of my illness i have no memory or very little but something keeps telling me i had to do something else as well..Anyhow thanks for the great reply..Davvo


    - - - Updated - - -


    Catseye started to incorporate the 27ºW Biss channels a good while back,,
    but if you don´t see them in Favourites bouquet you need to go to 27ºw services and you´ll see the list there..


    85297e8680c09.jpg


    I too am in Spain and need to avail of sat27.5ºW,,
    I am currently trying out same setup as yourself but with OpenSpa 6.. but not having much luck at the moment...
    Might have to move to openpli too...


    I will sort you my old one out all ready set up but you will have to wait while i sort my own out...


    - - - Updated - - -


    Well as i said unfortunately i appear to have screwed my box up completely so i will need to re install my image (good job wife is in bed LOL) and maybe try again..


    - - - Updated - - -


    Davvo can you explain how i edit the lamedb? if i FTP in with say filezilla i stop enigma 2 with init 4 download the file add the lines you said and then upload it back and restart Enigma 2 with init 3 is this correct??? sorry to be a bit of a pain but i am trying LOL (one way or another)


    - - - Updated - - -


    well i have tried this Davvo exactly as you said when i search for the string do i replace it with the string you said or paste it below the channel 5 hd??
    at the moment all it does is say's "Service Invalid (Timeout reading PMT)"
    thanks again for the help.
    this is how mine is now but don't i need to add something to another file as well??
    083652d267da9582.jpg


    - - - Updated - - -


    PM sent .....cazuela


    - - - Updated - - -


    I have the numbers etc i needed now thanks just need to try them LOL


    - - - Updated - - -



    Help please I have done everything as i should have i believe in this post as asked. i then went to change the oscam key file adding the channel 5 HD which were as in the picture so i have two pictures which according to the things i have read should now work but no still nothing except "Service Invalid (Timeout reading PMT)" i did as asked and teleneted and edited the files with noebook++ everything appears good...
    anyone any idea why this won't work??
    ecf56fb482d.jpg
    f98a2e664b20769232.jpg

    Catseye`s list is here -> Latest Catseye channel list.. Load it with a channel list editor like dreamset, e-channelizer or dreamboxedit. This channel list is perfect for all enigma2 images..


    If you have a problem using the channel list editor let me know and i will add an ipk for you buddy.


    thanks very much i am using notebook ++ is that ok?? although i downloaded the full list and European list but cannot find nay that mention 27.5w (intelsat 907 the BISS channels) will it be the same settings for mine as in these for channel 5HD? on a different sat?
    thanks again


    OH and idiot here just realised catseye is a person and not a program LOL....

    Hi a little advice please i am running a VU+ Solo2 box with openPLi set up for intelsat 907 27.5w to get british channels here in Spain.. I have just read something about Catseye to update my channel list as they have now added channel 5 HD to the sat. my question is where do i find out about catseye and use and would this be ok on my image as normally you would have to add to channel list manually for this sat.. if it is still manually anyone have the channel details i need to add for it please thanks NOT KEYS i have those.

    Hi thanks for the reply but i did check that and it has no information for setting up 27.5w I have tried and failed on many occasions i am not too good at this nowadays... I cannot find anywhere where it tells me what i need to move over the the new image to make it work ie. channel lists etc. which is why i made the offer to someone who has a solo2. As i said i have a working copy of Openpli so would have the files i need i suppose to make the new image work i would think am i correct in that?
    Or can i not do that???

    I have a working version of Openpli 4 with 27.5 and 28.2 working on it but it's a nightmare crashing doesn't record half the time Osycam has to be restarted manually. So i would like to change back to black hole with Xbmc as well as 27.5 and 28.2...i am not able to do this myself so was wondering if anyone could help. if so could you message me please.. I don't have much money but i would be prepared to pay something for your time..Thanks guys..


    My wife is driving me nuts becouse it isn't working right and she keeps missing stuff..


    Just to make it clear i do not need codes for 27.5 as have them and i can get them i don't want to upset anyone with this post i am just asking someone to help me please...

    I have been told i need to add a new line in my oscam key file for a new channel on 27.5w which is film4 +1 i have taken a look at the key file and i thing i understand what i need to do but dont know how to find the first 12 digit number from. the rest is the key etc. but where do i get the other number from?????

    Yes it will work, use the attached version..


    To Install:
    Telnet - FTP to /tmp/ > Paste this command into Telnet and press enter

    Code
    opkg install -force-overwrite /tmp/*.ipk


    FTP - FTP to /tmp > Menu > Plugins > Software Management > Install Local Extension
    USB - Copy .ipk to a USB stick > Insert into receiver > Follow On Screen Instructions


    Worked for me thanks from the USB key... thanks for that

    I have just downloaded oscam-ymodv18-51_openpli_all for my Solo2 i am running OPENpli 4 on 27.5w with BISS Keys when i have it sorted can someone tell me where i put it and where i need to put the key? i am sure i saw somewhere but can't find it now that it was different when installing it in OpenPli... thanks

    I have a SOLO 2 and i want to set it up to 27.5w but cannot get settings for my Horizon USB + can some one help me and tell me what i need to set on my Horizon to tune 27.5 in please i am new at this so haven't a clue i tried asking the makers for the settings and they just said there is nothing on there you can use. i have the dish set at 30w at the moment.... Thanks guys