Posts by seagen

Do you have the card inserted the correct way?

Card should have the chip face down

You can use Manufactor Inverto and select channel 3 and 4 even if they are taken by the Oneplace.

I have tested my self and seems to work just fine.

Channel 1 is used by the Oneplace for live TV. The other 3 are for recordings.

Channel 3 and 4 would only be used if you watch one live channel on the Oneplace and record from more then 1 other channel

You can not share the Module with any softcam.

Move the card to the softcam card reader and all should work just fine.

But be aware that some channels want still work like the old Viasat now named V and not the Sport channels TV2 Sport Premium, C more Live

You mist first get ride of the borken version by uninstall it.

apt-get remove enigma2-plugin-extensions-openwebif

Then also with ftp open /usr/lib/enigma2/python/Plugins/Extensions and delete any left overs to be sure all is removed.

Restart Enigm2 (GUI) to complite all.

Now from post nr1 download latest version and install.

Follow the guide in post nr1 to be sure you have an sucessfull installation

Ja litt hus arbeide fra og til er ikke så dumt vettu. Sett på lista til Kona så trenger du ikke og tenke mer på den vasken heller

Opps post på likt... De hva noe dritt da

You should use Channel 5 and 6 on your Duo2 the first 4 are already used by your OnePlace.

Hi

This is my settings working for Tuner A.

If you want to use Tuner B you need to choose another Userband For that tuner and also create a connection to Tuner A

Tuner B do not need a Cable since it's internal connected to Tuner A.

d4fbf5e7.jpg

1b602a2c3.jpg

Hi

I spoke to a friend who has a Duo2 you can use the lnb but you need to setup the tuner in advance mode and select one of the free userbands.

Then do the same with tuner 2 and you at least should have 2 working tuners.

I will try those settings later tonight on my Solo2 and see how the settings should be apply.

Yes then we can confirm it's not a combi lnb but pure SatCR/Unicable. So think that the tuners don't work with this type of lnb.

Here is your problem with your Duo2. I am not 100% sure bit it does not support SatCR lnb in your dish.

But you wrote that it hade 4 and not 3 ports?

When I read about the dish I cant find any information if it's Only SatCR or Combi.

SelfsatH22dCSS3 flat satelittantenne 24 User Band dCSS3, Smart Split Function - Alcadon AS

Yes I use my without a dish. And through the thirdparty source I also stream all my Swedish channels from my old dm7080 where i decode the channels with Oscam.

So on the OnePlace I have the Norwegian Channels as IPTV and the Swedish channels as internal stream source without a Sat dish in the bedroom

The thirdparty source settings can be find under the Channel Search settings. No need to install any apps

Nope you are correct. No need for a dish when in hybrid mode.

If the OnePlace is connected to your network it's in hybrid mode.

You can also go to settings and look at the Sat/Dish/Lnb settings.

Here you see type of lnb connected and signal strenght.

Ja min såg ikke ut. Glasset hva helt fult av fett og dritt etter mange års tjenst :)

If you have the OnePlace box from CD/Allente it works in hybrid mode.

This means that your box prefer to recive the channels as IPTV instead of satellite.

That can be the reason why you have all channels on the OnePlace and not the Vu+Duo2

Another thing is the LNB in your new dish. If it's a Unicable/SatCR combi you should also check that your lnb is connected to the Universal port

Unicable/SatCR does not work on your Duo2

Hei

Jeg ville inte rekommendera BT fjerr til dm900/920uhd

Ser at det er mange som sliter med dålige signaler

Men når det kommer til IR fjernkontroll er den nog bare sliten.

Min gamle orginale virket meget dåligt men den nye IR fernkontrollen som kom til min Dreambox One virker meget bra.

Så jeg åpnet den gamle og gjorde rent. Nå virker den fint den også

Så sprett opp din fjerr og se om det ligger mye dritt på IR øye.

No because there was a non supported version posted into this thread that you try an install.

Not your fault my friend. I just wanted to inform you why I deleted your post.

dniestre  Rick4 and @teak-won-do

I have deleted your post. This I did because i can only give support to the OpenWebif post I build my self.

Please start your own thread @teak-won-do for your version.

DreamOS based images use dpkg all Open Alliance uses older opkg.

So Melgas when you are using a OpenAlliance image you should use opkg commands and not dpkg/apt

opkg updat

opkg upgrade

opkg install <package name>

Have you installed any lcd skin from the feeds? If not try an install one and then chose that as your LCD skin.

This looks more as if you have no LCD skin at all. And some default skin is loaded