OSCam 1.20 rev 11209 emu with auto update for multiple PowerVu channels

There are 84 replies in this Thread which was already clicked 48,723 times. The last Post () by popocho507.

    hello joeuser and the entire linuxsat this is me after a brief illness pls have still never get my autoroll set working with dm800 here is my files for any expert corrections:
    VERSION: OSCam r11273


    OSCAM.CONF
    [global]
    logfile = stdout
    initial_debuglevel = 64
    nice = -1
    preferlocalcards = 1
    emmlogdir = /etc/tuxbox/config/oscam/


    [cache]


    [streamrelay]
    stream_relay_enabled = 0


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    delayer = 60
    ecminfo_type = 1
    user = linuxsatsupport
    read_sdt = 1
    write_sdt_prov = 1
    extended_cw_api = 2
    boxtype = dreambox


    [webif]
    httpport = 8888
    httptpl = /etc/tuxbox/config/tpl/
    httprefresh = 30
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
    http_status_log = 1



    OSCAMUSER
    [account]
    description = dvbapi
    user = linuxsatsupport
    group = 1
    keepalive = 1
    au = 1


    OSCAMSERVER
    [reader]
    label = emulator
    protocol = constcw
    device = /etc/tuxbox/config/oscam/constant.cw
    caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
    detect = cd
    ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000 000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000 ;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
    group = 1
    emmcache = 2,2,2,0
    emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000


    [reader]
    label = SoftCam.Key
    protocol = emu
    device = /etc/tuxbox/config/oscam/SoftCam.Key
    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000
    group = 2



    LOG
    18:37:31 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:32 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:32 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:32 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:080C818D6C892ED65FDC1D38B4C4A090): rejected reader sid (2 ms) by emulator - HD Sport 24
    18:37:33 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    18:37:33 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:34 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:34 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:34 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:BD69339A2E9350A8D0414A212E4A81BC): rejected reader sid (3 ms) by emulator - HD Sport 24
    18:37:34 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
    18:37:34 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:35 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:36 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:36 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:387BADAE8A5512FE9701B804119F2FCB): rejected reader sid (3 ms) by emulator - HD Sport 24
    18:37:36 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    18:37:36 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:37 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:38 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:38 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:6029A4AD20C50DF8B630F5402DEA7487): rejected reader sid (3 ms) by emulator - HD Sport 24
    18:37:38 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    18:37:38 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:39 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:40 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:40 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:A0D703D8AFC1039D3D06DDBC4913E334): rejected reader sid (3 ms) by emulator - HD Sport 24
    18:37:40 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    18:37:40 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:41 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:42 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:42 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:4B581EAB6BAA9297B20B0A62C6B77A1E): rejected reader sid (4 ms) by emulator - HD Sport 24
    18:37:42 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    18:37:42 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:43 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:44 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:44 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:98A52CF6FCDF8A4F7C1B9D816F9AE21D): rejected reader sid (3 ms) by emulator - HD Sport 24
    18:37:44 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    18:37:44 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:45 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    18:37:46 08E2B874 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 006D ECMPID 1779 PMTPID 1920 VPID 1921
    18:37:46 2C001A9E c (ecm) linuxsatsupport (0E00@000000/0000/006D/40:64D7A8ED5D6922BF611C848860438A5A): rejected reader sid (4 ms) by emulator - HD Sport 24
    18:37:46 2C001A9E c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    18:37:46 2C001A9E c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
    18:37:47 2C001A9E c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921


    pls any help is welcome for me to also get this working with my dm800 thanks LINUXSAT



    after re-edited my files to
    server:
    [reader]
    label = emulator
    protocol = emu
    device = emulator
    caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
    detect = cd
    ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
    group = 1
    emmcache = 1,2,31,1 # Recommended value = 2,2,2,0
    emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000


    user:
    [account]
    description = dvbapi
    user = linuxsatsupport
    group = 1
    keepalive = 1
    au = 1


    conf:
    [global]
    logfile = /etc/tuxbox/config/oscam.log
    initial_debuglevel = 65535
    pidfile = /etc/tuxbox/config/oscam.pid
    clienttimeout = 4000
    clientmaxidle = 300
    netprio = 1
    nice = -1
    maxlogsize = 10000
    waitforcards = 0
    preferlocalcards = 1
    dropdups = 1
    cwlogdir = /etc/tuxbox/config/
    emmlogdir = /etc/tuxbox/config/


    [cache]


    [streamrelay]


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    request_mode = 1
    # delayer = 60
    user = linuxsatsupport
    read_sdt = 2
    write_sdt_prov = 1
    extended_cw_api = 2
    boxtype = dreambox


    [webif]
    httpport = 8888
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
    http_status_log = 1


    the log is attached


    what can i be missing? i need help

    You have two readers, but maybe slightly confusingly labeled. The first reader, althoug labeled "emulator", uses constantcw protocol, which is not part of emu but an included function of oscam. The second reader is the labeled "sofcam key" is the "emu" reader and that is where the "emmcache","emu_auproviders". and "aupprovid" lines should be set...


    Never mind, I just noticed you fixed that at the bottom


    From your log:
    [Emu] Key not found: P 006D 00


    Either the key is missing in the SoftCam.Key file, or the format is incorrect.


    If you send me your softcam file by pm, I will look at it for you.

    Edited once, last by joeuser ().


    (dvbapi) Demuxer 0 has 1 ecmpids, 3 streampids, 1 ecmfilters and 0 of max 0 emmfilters

    Hi Guys,


    Sorry for jumping on the post, but I'm pulling my hair out and theirs not much there to start with.


    I'm running OSCam: 1.20-SU-r321-EMU-r331-731-JoeUser - Build: r11211 on a DM800SE, but cannot get auto update to work.



    My oscam.conf
    [global]
    logfile = /tmp/oscam.log
    logduplicatelines = 1
    pidfile = /var/run/oscam.pid
    bindwait = 20
    unlockparental = 1
    nice = -1
    maxlogsize = 1000
    block_same_ip = 0
    block_same_name = 0
    emmlogdir = /tmp/


    [cache]
    max_time = 18
    [streamrelay]
    stream_relay_enabled = 0


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    user = DVBApi
    boxtype = dreambox
    read_sdt = 1
    write_sdt_prov = 1
    extended_cw_api = 2


    [webif]
    httpport = 8888
    httpuser = root
    httprefresh = 10
    httppollrefresh = 10
    httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
    httposcamlabel = OscamDreambox


    ----
    Oscam.server
    # oscam.server generated automatically by Streamboard OSCAM 1.20-SU-r321-EMU-r331-731-JoeUser SVN r11211
    # Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt


    [reader]
    label = Fixedkeys
    description = Fixed keys
    protocol = constcw
    device = /var/keys/constant.cw
    group = 1


    [reader]
    label = emulator
    protocol = emu
    device = emulator
    caid = FFFF,0E00,0E01
    detect = cd
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,007400,007800;1801:000000,007301,001101;2600:000000;FFFF:000000;0E00:000000
    group = 1
    emmcache = 2,2,2,0
    emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000;FFFF:000000



    I have Softcam.key in the oscam directories, just to save space heres a cut down version



    ;ECM KEY
    P 000122B0 00 00000000000000; Channel
    P 000122B0 01 00000000000000;


    ;EMM KEY
    P 0001 00 KEYGOESHERE ; EMM Key 9.0E, 11766, 11804
    P 0001 00 KEYGOESHERE ; EMM Key 9.0E, 11766, 11804



    It could be something as simple as I've got the formatting wrong...


    IF anyone could point me in the right direction, I would be greatful.


    Have fun

    Not sure which sat, but looks like your sid is not in the right format and neither are your emm keys. For 9E, I use:

    trying to setup autoroll but cant seem to get it running :-( any help?


    Hello,


    does anyone have a problem with this oscam version not decoding second and subsequent audio streams on a channel ? Only the 1st audio stream is decoded. Audio stream type is 0x06.

    AU on AFN 9.0 works like a charm now...
    Still got two questions...
    1. Is it normal that he just adds new keys in SoftCam.Key instead of overwriting?
    2. Obvious you need to stay on a channel to update the keys, but is there a way too speed things up when the old keys are not active anymore and you need to Update?

    My AFN also always get the update every 30 mins using DM800SE but sometimes I have to restart the emulator to change to the new updated key on softcam. . .
    hoping there will be some fix for this. .

    [QUOTE=


    But that is also quite old. Try the latest 'official' version, it has all my fixes plus they added tandberg support. ;)[/QUOTE]
    which official version u recomend for dm800se?

    VU ZERO 4K

    wetek play2


    Olá,
    Com esta OSCam 11209, consigo abrir canais powervu por stream relay com Azbox MiniMe e imagem OpenATV 6.0?
    Se não consigo abrir, é possível com que imagem?
    Obrigado.


    Problema resolvido.

    Azbox MiniMe abrindo powervu com OpenATV 3.0 e oscam via stream relay.

    Edited 2 times, last by evoms ().

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login