Anyone clearing virgin media on Wetek play with OSCAM

Hi Guys

As I am having no luck over 50 hours spent and now I'm trying a post in this section to see if there is anyone who has managed to clear vm via oscam on maybe openATV openSPA openHDF or similar but with oscam...I have been trying for the past 50 hours and am just stuck and cant get any where....Ive had one of the seniors look into it but as their not using vm not much they can do as all looks good my end.

I keep getting

2016/02/25 00:25:33 7BE055B6 c (ecm) dvbapi (1841@000000/0000/02C2/89:289062DA3887DDCFD1DFB78E9E183EE9): not found (0 ms) by label - Sky Sports 2
2016/02/25 00:25:33 7BE055B6 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 1 disabled ecmpids!
2016/02/25 00:25:33 7BE055B6 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 10E1 ANY CHID PMTPID 0106 VPID 0259

Ive installed all the above 3 and osam auto bouquets with and without enabled cam edited .server literally everything under the sun....I use the same line with mgcam in zgemma working fine clearing..use it with oscmam and I keep getting above eror and just wont clear.

If there is anyone who has managed to get theirs to work please come forward and help out so I can then write a nice long in depth manual and save someone a waste of 50 or more hours trying to fig this out.

Thanks
ChromaEdge

Quote from mach1

http://linuxsat-support.com/showthread.php?t=71464 maybe this configs will help mate

Hi Mach1

I was given these files by master G in another thread and I used them and am using the same ones still no go bud

Quote from abu baniaz

Starting different threads for the same issue won't help you get a fix any quicker. Your progress ends up being veryfragmented difficult to follow. Stick to one thread!

For time being, work with oscam on your mips receiver. Once you have it working transfer those configs to the Wetek.

Are you using the same line from your peer on two different devices at the same time? If so, does your peer allow you to do this?

Morning

No not at the same time i have been using it on wetek but not working so put it in zgemma to test on mgcamd1.38 and no issues clears all channels....this is the first time I'm using oscam without a choice because i dont think there is a mgcamd for arm version otherwise i wouldn't even look at oscam for a second if i knew this much head fu** was coming up.Just wont clear on oscam for some reason. This has turned into a real nightmare...I have 2 threads 1 in vip and one hear to get the attention of any other individual who might have had the same issue with wetek.

If there is someone who can maybe run a check list with me via what ever method here or pm or typing via skype to see what i might be missing. One question that no ones answered yet is when i install oscam all my config files aka ones below are found in user/keys and no in etc/tuxbox/config so I just edit and replace the ones in usr/keys. Could this be the issue do they have to be in etc/tuxbox/config?

1: installed openATV

2: Installed oscam enigma2-plugin-softcams-oscam_10943_cortexa9hf-vfp-neon

3: edited files to

oscam Conf

[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[cache]
cwcycle_check_enable = 1
cwcycle_check_caid = 0100,0500,1810
cwcycle_allowbadfromffb = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 16003
httpcss =
httppiconpath =
http_prepend_embedded_css = 1
httprefresh = 20
httppollrefresh = 20
httpshowpicons = 1
httppiconsize = 45
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

oscam.dvbapi

P: 1841:000000

oscam.server
[reader]
label = remote
protocol = cccam
device = xxxxxxxxxxxx.xxx ,56564
user = xxxxxxxx
password = xxxxxxxx
group = 1
emmcache = 1,3,2

oscam.user

[account]
user = linuxsatsupport
group = 1

started oscam and scanned channels with tuner config to net id 41048 and virmin provider 6952 automatic scan...picks up 514 channels go to channel retart oscam nothing clearing

Keep getting

2016/02/25 00:25:33 7BE055B6 c (ecm) dvbapi (1841@000000/0000/02C2/89:289062DA3887DDCFD1DFB78E9E183EE9): not found (0 ms) by label - Sky Sports 2
2016/02/25 00:25:33 7BE055B6 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 1 disabled ecmpids!
2016/02/25 00:25:33 7BE055B6 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 10E1 ANY CHID PMTPID 0106 VPID 0259

Unless I'm missing to enable or edit some other file??? i don't know

Kind regards

ps: thanks for being patient i appreciate it

a little bump

Quote from tomthebomb1968

Box type is set to dreambox. Definitely not this but off the top of my head I can't remember the input required and I'm not home now. I'll have a look at my config later. It may be set as pc

Sent from my HTC One M8 using Tapatalk

excellent im awaiting eagerly bud appreciate this

Quote from tomthebomb1968

Here is mine, boxtype is ignored

[dvbapi]
enabled = 1
#boxtype = dreambox
user = localuser

what other settings did you after loggin intp wetekip:8888 any other boxes checked or anything

Quote from jim1985

I was going to say the same thing.

Your oscam.server file should probably look something like this:

Code

[reader]
label = remote
[COLOR='#FF0000']protocol = newcamd[/COLOR]
device = xxxxxxxxxxxx.xxx,56564
[COLOR='#FF0000']key = xxxxxxxxxxxxxxxxxxxxxxxxxxxx[/COLOR]
user = xxxxxxxx
password = xxxxxxxx
group = 1
emmcache = 1,3,2

This si what mine is looking like

[reader]
device = xxxxxxxx.xxx,27900
key = 0102030405060708091011121314
user = xxxxxxxxxx
password = xxxxxxxxxx
label = remote
protocol = newcamd
group = 1

But nothing is clearing on box...is there any other settings i need to adjust or buttons i need to check by logging into wetekip:8888

what about oscam.srvid will it auto have virmin frequencies in there?

- - - Updated - - -

right box is clearing channels now after i stumbled accross this oscam.server settings

[reader]
label = cable_uk
protocol = newcamd
device = xxxxxxxx.xxx,27000
key = 0102030405060708091011121314
user = xxxxxxxxx
password = xxxxxxxx
disableserverfilter = 1
fallback = 1
caid = 1841
ident = 1841:000000
group = 1
audisabled =

- - - Updated - - -

Quote from ChromaEdge

This si what mine is looking like

[reader]
device = xxxxxxxx.xxx,27900
key = 0102030405060708091011121314
user = xxxxxxxxxx
password = xxxxxxxxxx
label = remote
protocol = newcamd
group = 1

But nothing is clearing on box...is there any other settings i need to adjust or buttons i need to check by logging into wetekip:8888

what about oscam.srvid will it auto have virmin frequencies in there?

- - - Updated - - -

right box is clearing channels now after i stumbled accross this oscam.server settings

[reader]
label = cable_uk
protocol = newcamd
device = xxxxxxxx.xxx,27000
key = 0102030405060708091011121314
user = xxxxxxxxx
password = xxxxxxxx
disableserverfilter = 1
fallback = 1
caid = 1841
ident = 1841:000000
group = 1
audisabled =

Display More

Now to write a tutorial :D