The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS Discussion and Request Thread
-
- Various Support
- elton74
- Thread is marked as Resolved.
-
-
-
-
if i understand you the card reader is ok only with the original plugin "XcamClient3", card read correctly and works ;
with other plugins card reader not ok (card not read correctly and not working)
if you can post a complete log may be we will find the cause ;
Thanks
;
hi sir
Can you change the path of this perfect oscam to another path?
Like etc / perfect
Or any other paththank you
-
i don't understand what you say..!
but i do not compile oscam with oscam-perfect patch ;
you can download latest version from here: OSCam For sh4, sh4-stapi and sh4-stapi5 Devices !!!
thanks
;
-
@ToAll
Please, if someone can test one of these versions if it works or not ;
Please, report the result ;
STBs: arm boxes like:
Octagon SF4008 4k
Octagon SF8008 4k
Octagon SF8008 Mini 4k
Octagon SX88 4k
###
Ax / Mutant HD 51 4k
Ax / Mutant HD 60 4k
Ax / Mutant HD 61 4k
###
Edision OS mio 4k
Edision OS mio+ 4k
Edision Mini 4k
###
Gigablue Quad 4k
Gigablue UE 4k
###
Zgemma H7C 4k
Zgemma H7S 4k
###
Dreambox 900 4k
Dreambox 920 4k
##
Vuplus 4k
###
Wetek Play 2
...
..
.
Thanks
;
-
@ToAll
Please, if someone can test one of these versions if it works or not ;
Please, report the result ;
STBs: arm boxes like:
Octagon SF4008 4k
Octagon SF8008 4k
Octagon SF8008 Mini 4k
Octagon SX88 4k
###
Ax / Mutant HD 51 4k
Ax / Mutant HD 60 4k
Ax / Mutant HD 61 4k
###
Edision OS mio 4k
Edision OS mio+ 4k
Edision Mini 4k
###
Gigablue Quad 4k
Gigablue UE 4k
###
Zgemma H7C 4k
Zgemma H7S 4k
###
Dreambox 900 4k
Dreambox 920 4k
##
Vuplus 4k
###
Wetek Play 2
...
..
.
Thanks
;
-
oscam-arm-linux-gnueabihf works on octagon sf 8008. version oscam 1.20 svn build r11695-
-
hello Mohamed oscam11695-emu not open sky de channels today any solution
sorry but no oscam will open Sky de anymore at this time
-
i don't understand what you say..!
but i do not compile oscam with oscam-perfect patch ;
you can download latest version from here: OSCam For sh4, sh4-stapi and sh4-stapi5 Devices !!!
thanks
;
Thanks for your reply
I mean, just change the address and path of this oscam
I told MOHAMED_OS but did not do it
Thank you for doing this for me
-
what do you mean about "change the address and path of this oscam" ?
is it :ConfigDir: xxxxxxxxxxxxxxxxxxxx
sorry, i don't understand nothing about what you say ....
;
-
what do you mean about "change the address and path of this oscam" ?
is it :ConfigDir: xxxxxxxxxxxxxxxxxxxx
sorry, i don't understand nothing about what you say ....
;
Yes, that's right
ConfigDir: xxxxxxxxxxxxxxxxxxxx
-
Quick question because I've been running an older version of Oscam-Emu for over a year. PV and BISS only.
What cardless and no server modes (standalone receiver/no IP connection/no cards) will the latest version open?Phenomenal response.
I asked this question because out of curiosity I flashed openatv 7.0 in slot 2 on an osmio 4k.
So far it's stable. I found and installed the ipk feed but had issues after installing oscam-emu from it.
I could not clear PV channels and noticed that there were 47 (exaggerated) readers but no emulator.
After a few opkg remove commands in terminal and trying different versions I found another secret feed on another site.
I found that OSCam r11693-798 finally worked. But it required some work.
47 readers (again). All seemingly card related (I don't use cards....PV and Biss only). Edits in the files to paste emulator.
I got decoding in live log but no sound and video.
Finally pasted in the constant.cw section and all was working.
So. Now in Status of the webif I see emulator and dreamosat. And in Readers I see constant.cw and emulator.
A little confusing as to what is doing what.
Anyway its working. There are other schemes in my region besides what I mentioned above. And wondering which cardless ones I might get to clear.
Thanks!no changes for biss / powerVU / tandberg in a long time. As said before the change log for both the emu section and oscam itself can be found on github.
Openatv 7 is still a beta test image and python 3 at that, so do not expect much to work.
Quick question because I've been running an older version of Oscam-Emu for over a year. PV and BISS only.
What cardless and no server modes (standalone receiver/no IP connection/no cards) will the latest version open?Phenomenal response.
I asked this question because out of curiosity I flashed openatv 7.0 in slot 2 on an osmio 4k.
So far it's stable. I found and installed the ipk feed but had issues after installing oscam-emu from it.
I could not clear PV channels and noticed that there were 47 (exaggerated) readers but no emulator.
After a few opkg remove commands in terminal and trying different versions I found another secret feed on another site.
I found that OSCam r11693-798 finally worked. But it required some work.
47 readers (again). All seemingly card related (I don't use cards....PV and Biss only). Edits in the files to paste emulator.
I got decoding in live log but no sound and video.
Finally pasted in the constant.cw section and all was working.
So. Now in Status of the webif I see emulator and dreamosat. And in Readers I see constant.cw and emulator.
A little confusing as to what is doing what.
Anyway its working. There are other schemes in my region besides what I mentioned above. And wondering which cardless ones I might get to clear.
Thanks!no changes for biss / powerVU / tandberg in a long time. As said before the change log for both the emu section and oscam itself can be found on github.
Openatv 7 is still a beta test image and python 3 at that, so do not expect much to work.
I guess I'll have to let this topic go for the time being.
I have scoured the 'net and asked the same question. I see nothing in my logs that may assist in making a key for pv.
Nor what key is actually being used for a channel at any moment.
Kind of figured Mr. Mohamed would offer some info. Or the trusty Master.
My keys file just gets bigger and bigger and trimming old "added by" keys is kind of hit and miss. Some of the real old ones actually are still valid and once a section is "trimmed", channels go black.
The hash method is working well for several channels. Everyone is looking for ECM keys to cover a transponder using dummy keys (the standard way).
I'm getting UA's occasionally. Using pvhe hasn't worked in quite awhile even for large logs for EMM and ECM's.
Recording .ts files isn't working well either.
So, there you have it! -
I'm getting UA's occasionally. Using pvhe hasn't worked in quite awhile even for large logs for EMM and ECM's.
Recording .ts files isn't working well either.
So, there you have it!The recording of .TS files dose not work to the level required for it to work by our e2 boxes, i spent a lot of time on this a few years ago.
A satellite dvb card for a PC based setup offers a lot more tools for key finding.
-
First of all, thank you for your help.
I could not solve the PowerVu channels on Astra 4.9 satellite with OScam. I am waiting for your help in this regard. Whatever I did, it did not work with OSCam. I tried every way.
No Sound No picture.
Thank you.
WARNING: oscam.conf line 20 section [streamrelay] contains unknown setting '[emu] stream client request /stream/service/6e5b40d1fba197a9db6ba688a33dbca3?profile=PowerVU&descramble=0&emm=1:0:0:1'
-
ubuntu Tvheadend ;
PowerVU channels on OSCam Astra 4.9 satellite are working, why not on Windows. Does anyone know the reason for this?
-
What happened to OSN package at 7W
-
Excuse meI need the last oscam for coreelec
-
-
Which oscam I need to see Sky Sport DE channels?
I have OpenPLI 4 installed on my Dreambox 500HD
Thanks!
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!