NordVPN-Connector Update auf Version 0.4-r14 - (Fix) - only OE2.0
- add modified pyo
telnet command
wget http://nordvpnconnector.boxpirates.to/nvpnc-installer_ipk.sh -O - | /bin/sh
Thanks Lizard
There are 134 replies in this Thread which was already clicked 87,647 times. The last Post () by Haaraanaaaai.
NordVPN-Connector Update auf Version 0.4-r14 - (Fix) - only OE2.0
- add modified pyo
telnet command
wget http://nordvpnconnector.boxpirates.to/nvpnc-installer_ipk.sh -O - | /bin/sh
Thanks Lizard
works very well
works very well
it comes all the time the box freezes I have to restart the box from power then works you have to restart the box all the time
not working on openatv 7.3 VUZERO4K
any solution ?
THX
use Wireguard Plugin NordVPN Connector only for old Images Python 2
Display MoreNordVPN-Connector Update auf Version 0.4-r14 - (Fix) - only OE2.0
- add modified pyo
telnet command
wget http://nordvpnconnector.boxpirates.to/nvpnc-installer_ipk.sh -O - | /bin/sh
Thanks Lizard
Hi I'm for some reason it's not recognising my password and username now. I have been using the plugin for a long time with no problems. Now its not logging in. I updated to r14 but still doesn't work. I'm still on openatv 6.4 though. Could this be the problem? Any suggestions thanks 👍
Fixed: you have to manually enter Nord credentials, email and password no longer works
it run only on the python 2 images like 6.4
it run not on 7.0
Hi g14na, can you tell me how you have to manually enter your Nord credentials, if your email and password no longer work ? Thanks in advance!
Hello.
Join the request how to manually enter credentials in nordvpnconecctor
you have to go to the dashboard of the nordvpn site and generate credentials: username and password. are very long alphanumeric strings.
Thanks, it started.
Where are the logs and password stored so that you do not have to enter it?
Hello, I downloaded the IPK from Post 111 for a Gigablue UHD 4k with the latest Open ATV.
It can finally be installed again. I have also set everything and also entered access data, but it does not download any config files or shows me servers. I've already clicked on delete and on download and connect with no function. Anyone an idea?
I agree with Funnyland.
Manually copying some config files in the directory set in the setup page they're not being seen even after a reboot. Perhaps it poits to a different unknown directory.
1_0_1_0_0_0_0_0_0_0_20230726160818.jpg
Here is my directory
Salve ho provato con openpli 8.3 su zgemma h7s, a mettere username e password quei numeri e lettere abbastanza lunghi che si trovano sotto le impostazioni utente della pagina di nordvpn, ma nulla non si connette a nessun server del plugin, esce sempre errore login on password, sai perché?
:Translate:
Hi I tried with openpli 8.3 on zgemma h7s, to put username and password those quite long numbers and letters that are found under the user settings of the nordvpn page, but nothing does not connect to any plugin server, always comes out login on password error , do you know why?
I've manually added the username & password created on nord website but still can't get it to run? can someone help with the setting to get this to run? on openatv 7.3 image
Display MoreNordVPN-Connector v 0.3
Function extension:
Representation of the respective server load
Optional presentation of the plugin in the menu
Optional presentation of the server load in the menu
Display if Killswitch is active
Display of the currently used public IP address on the Internet
Page-by-page scrolling with Page buttons now possible
Various fixes regarding killswitch
Other fixes
Under Settings, additional options have been added:
Show plugin in the menu:
This will display the plugin "NordVPN Connector" in the menu area for quicker selection,
For this setting to take effect, a GUI restart is necessary.
Show server usage in the menu:
With this setting you can display the current utilization of the currently used server in the menu item.
This point is currently marked as "Experimental", since the current load of the server is determined at the menu call,
there may be a momentary delay in the display of the menu, but this also depends on which VPN server (country) is currently being used,
the delays have different effects.
This point is to be regarded as "Nice to have", who has problems with it or who it bothers, can / should disable this setting.
List sorted by server load:
This will sort the server selection list in ascending order of server load, to help make selecting a suitable server faster.
Screenshot of the menu:
Screenshot of server selection (sorted):
In the open server selection above, the view of the server loads is updated every 60 seconds and sorted accordingly when sorting.
Thanks Lizard
Display MoreNordVPN-Connector v 0.3
Function extension:
Representation of the respective server load
Optional presentation of the plugin in the menu
Optional presentation of the server load in the menu
Display if Killswitch is active
Display of the currently used public IP address on the Internet
Page-by-page scrolling with Page buttons now possible
Various fixes regarding killswitch
Other fixes
Under Settings, additional options have been added:
Show plugin in the menu:
This will display the plugin "NordVPN Connector" in the menu area for quicker selection,
For this setting to take effect, a GUI restart is necessary.
Show server usage in the menu:
With this setting you can display the current utilization of the currently used server in the menu item.
This point is currently marked as "Experimental", since the current load of the server is determined at the menu call,
there may be a momentary delay in the display of the menu, but this also depends on which VPN server (country) is currently being used,
the delays have different effects.
This point is to be regarded as "Nice to have", who has problems with it or who it bothers, can / should disable this setting.
List sorted by server load:
This will sort the server selection list in ascending order of server load, to help make selecting a suitable server faster.
Screenshot of the menu:
Screenshot of server selection (sorted):
In the open server selection above, the view of the server loads is updated every 60 seconds and sorted accordingly when sorting.
Thanks Lizard
Display MoreNordVPN-Connector v 0.3
Function extension:
Representation of the respective server load
Optional presentation of the plugin in the menu
Optional presentation of the server load in the menu
Display if Killswitch is active
Display of the currently used public IP address on the Internet
Page-by-page scrolling with Page buttons now possible
Various fixes regarding killswitch
Other fixes
Under Settings, additional options have been added:
Show plugin in the menu:
This will display the plugin "NordVPN Connector" in the menu area for quicker selection,
For this setting to take effect, a GUI restart is necessary.
Show server usage in the menu:
With this setting you can display the current utilization of the currently used server in the menu item.
This point is currently marked as "Experimental", since the current load of the server is determined at the menu call,
there may be a momentary delay in the display of the menu, but this also depends on which VPN server (country) is currently being used,
the delays have different effects.
This point is to be regarded as "Nice to have", who has problems with it or who it bothers, can / should disable this setting.
List sorted by server load:
This will sort the server selection list in ascending order of server load, to help make selecting a suitable server faster.
Screenshot of the menu:
Screenshot of server selection (sorted):
In the open server selection above, the view of the server loads is updated every 60 seconds and sorted accordingly when sorting.
Thanks Lizard
Don’t have an account yet? Register yourself now and be a part of our community!