why did you ask about system recovery utility??
You have an idea?
Thanks
There are 225 replies in this Thread which was already clicked 93,911 times. The last Post () by Riyad12345gy.
why did you ask about system recovery utility??
You have an idea?
Thanks
why did you ask about system recovery utility??
You have an idea?
Thanks
btw, what model # do you have , MAG 322 or MAG 250 ?? is it original or chinese clone ? in MAG250 there is chinese clone available , if you have clone than it's garbage
why did you ask about system recovery utility??
You have an idea?
Thanks
If u have 322, then please flash firstly public image from infomir resources, then my transitional. If it still not working then let us know.
Wysłane z mojego LG-M250 przy użyciu Tapatalka
Display Morewhy did you ask about system recovery utility??
You have an idea?
Thanks
If u have 322, then please flash firstly public image from infomir resources, then my transitional. If it still not working then let us know.
Wysłane z mojego LG-M250 przy użyciu Tapatalka
I have original Mag322
I did flashed that way 3 times and still nothing
I even connected video wire instead of HDMI and still black screen after boot
By the way your page with your firmware doesnt load
Thanks
By the way your page with your firmware doesnt load
Thanks
I'm doing some stuff with enabling new things such as public ftp to download fw.
Honestly really strange, a few people with the same model tested firmware and is okay. Please check these things:
1. What shows when u change NAND to opposite?
2. Are you able to connect to stb by ssh on black screen? Check both on wi-fi and ethernet.
3. Which version is shown on system recovery -> device info? Send please photo.
It seems that some problem happened when image was copied to stb memory. Let us know what are these points.
Wysłane z mojego LG-M250 przy użyciu Tapatalka
Display MoreBy the way your page with your firmware doesnt load
Thanks
I'm doing some stuff with enabling new things such as public ftp to download fw.
Honestly really strange, a few people with the same model tested firmware and is okay. Please check these things:
1. What shows when u change NAND to opposite?
2. Are you able to connect to stb by ssh on black screen? Check both on wi-fi and ethernet.
3. Which version is shown on system recovery -> device info? Send please photo.
It seems that some problem happened when image was copied to stb memory. Let us know what are these points.
Wysłane z mojego LG-M250 przy użyciu Tapatalka
it worked excellent for me , on brand new 322 , i also reversed to informir image and worked great, i am waiting for nepose updated image to release. :):)
2d2233c9a1e9d90c0f062.jpgwhen the box is booting I can see infomir logo etc
Then it blinks (screen) another infomir logo comes on stays for bit and then black screen comes and cant do nothing after that cause dont see nothing
I thought maybe switching to video cable insted HDMI will help but it is same thing
I change nand1 to nand2 same i change resolution to every possible still black screen after boot
did you use same video cable came with BOX or rendom ? because mag box won't work with random video cable
I switch 4 different cables
If I see booting screen and logo I dont think cable would be problem?
ok if you using any random video cable plese connect video cable this way ,
Box -> TV
Yello => white OR RED (try one by one )
red => Yello
White => red
if you will see logo rolling with stripe , means your video setting is wrong selected ,
nothing is rolling just nothing with any of the cables except yellow screen goes to black
If I see booting screen and logo I dont think cable would be problem?
try another HDMI as well change HDMI port on TV , it seems video or display selection is not correct ,
Like I said i try that many times and 4 different cables dont think it is the problem
I think when updating the firmware something went wrong
But what surprise me that reflashing will not fix this?
when I got the box everything works first time after boot then I click update firmware with internet connected and after update finish box restarted and black screen since
here in north america , our all TV is NTSC , many time this box switch to PAL and we face this issue, it just infomir logo for moment black screen
than i normaly choose , and all good , 62b8159a34c.jpg
-
I did that and switched to other resolutions without any success
Like I said i try that many times and 4 different cables dont think it is the problem
I think when updating the firmware something went wrong
But what surprise me that reflashing will not fix this?
you did update with URL or USB ?
It was automatic update from internet
Don’t have an account yet? Register yourself now and be a part of our community!