hello Nepose
it looks like if you want access you need to give some credential ident/password to access ftp or > you can access but from our side looks as private ...
not public or anonymous
There are 225 replies in this Thread which was already clicked 93,914 times. The last Post () by Riyad12345gy.
hello Nepose
it looks like if you want access you need to give some credential ident/password to access ftp or > you can access but from our side looks as private ...
not public or anonymous
Hi, unfortunately yes because I'm trying to install some simple cms to better generate static content. FTP public access is directly connected to the directory on website where firmware and utilities are served. I hope that today both sources will be ready. In case of anything will write here.
Wysłane z mojego LG-M250 przy użyciu Tapatalka
I see you might be working on 351??
Thank you
Yes, new image will be available also for MAG 351, 270/275 and 255.
Wysłane z mojego LG-M250 przy użyciu Tapatalka
any plans on making a FW for the 256 ?
Yes, probably not the 2.19.02 ver, but next one I'm planning for 256
I would like to add a custom image to the boot and custom Portal url as default. Can it be done via this on Mag 322?
Many thanks.
Hi There,
Im new to all this and would like to try the custom firmware for my Mag 322. I have the files can you please tell me what the transitional file needs to be renamed to. I put it on a fat32 formatted usb and just renamed in imageupdate and all I get is imageupdate not found
many thanks
Hi, the transitional file must be renamed to "imageupdate" and should be on "mag322" directory. Check please if your usb is 8 GB or less, if you have "mag322" directory and if you have downloaded correct file. "mag322" directory must be on root of pendrive. You can download from https://firmware.magboxes.xyz -> Download :)
Happy New Year
I would like to add a custom image to the boot and custom Portal url as default. Can it be done via this on Mag 322?
Many thanks.
Did you write me on mail?
Wysłane z mojego LG-M250 przy użyciu Tapatalka
Hi there,
I managed to get the transitional image on first like you instruct but when I try to flash the proper image second all I get is wrong signature.
My box is a Mag 322 w1
Any help would be very appreciated. Than k you in advance
Hi, so you flashed the second image and the error showed? This is because the second image is intended to flash through STB settings but it is now impossible because of some signing problems. Install only transitional image.
I'm working on developing costume firmware for chines clone of mag250. But mag250 failed in 24hours after flashing new firmware can anybody help me about it( to create costume firmware)?
You are basing on 0.2.18-r22 right?
This version has some addons done by Infomir devs which kill chinese clones because they are illegal from their side. Unfortunately you will have to look for root file system from older versions (IMHO 0.2.16 will be a good choice if you find it).
Thanks but I couldn't found 0.2.18-r16 anywhere.
Also I need to know can I use latast portal+ rootfs 0.2.18-r16 in Chinese mag250
finally i reverse engineered firmware provided by chines manufacturer. there's only only one change only /dev/initctl file is deleted in rootfs.
I received this patch to fix blocked portals for all mag devices in a PM
can`t test it myself, but could be useful to other members
if someone could test and provide some feedback it would be great
To install custom mag firmware load folders onto usb 2(not usb3). Insert usb into rear usb slot. Then enter boot loader menu by holding menu key as unit boots from cold boot. Select upgrade tools (open by pressing right on remote) select usb boot and click ok.
thanks to CRACKERZ for the patch
Don’t have an account yet? Register yourself now and be a part of our community!