Skin Support - Post questions for all my skins in here.

There are 1,280 replies in this Thread which was already clicked 277,601 times. The last Post () by woodbass.

    I can't get the main EPG to show more than 10 rows when the small TV picture is shown (i.e. "Picture in Graphics" is on).


    I've been using 16 rows in an old version of Slyk on another box. Is there a reason for the limit now?


    Thanks.



    UPDATE: I changed NumberOfRows in /usr/share/enigma2/slyk-q-1080/q-epg.xml to 16 and that seems to work.

    It should follow the settings though, shouldn't it?



    Zgemma H.2H, openATV 7.2.20230222 (2023-02-19),

    I've tried both enigma2-plugin-skins-slyk-onyx-1080_2.34.20230103_all.ipk

    and enigma2-plugin-skins-slyk-q-1080_1.36.20230103_all.ipk

    Well yeah and no. When these skins were designed I purposely put those values in, so the layout was as close to the original as possible.
    I was for ever telling people how to change a defaults images number of rows to get the correct layout. isn't the default something stupid like 20 rows.
    But yes, the solution is exactly what you have done. Either change that value in the skin. Or delete it all together if you want to set it via the settings.

    ** A person who feels appreciated will always do more than what is expected **

    I've spotted a few problems with the movie player screen. (Shown when you pause or fast-forward recorded movies.)


    1) The time on the left sometimes disappears. Usually when there are lots of zeros in it!

    ( It is easy to see here if I just leave a 2-hour+ movie on double-speed.)


    2) The playback speed isn't shown. (Though it isn't shown in the default skin or MetrixHD either.)

    The time shift screen does show it though.


    I've tried editing /usr/share/enigma2/slyk-onyx-1080/o-movies.xml to move stuff around, and restarting/rebooting but it doesn't seem to do anything so I may be looking at the wrong thing.


    Damon


    Zgemma H.2H, openATV 7.2.20230222 (2023-02-19),

    enigma2-plugin-skins-slyk-onyx-1080_2.34.20230103_all.ipk

    This is something openatv changed lately. Never got round to testing or possible fixing it yet.
    And if its different from all other oe-alliance images. Then its not getting fixed until everyone uses the same components code.


    Movie player screen ... there is an option in user interface > settings > show PVR status in movie player infobar


    All my skins on this forum, have a recommend settings section. You would find that info in there :face with rolling eyes:
    RE: *UPDATED* Slyk Onyx 1080 (Install - FAQs)

    ** A person who feels appreciated will always do more than what is expected **

    Quote from KiddaC

    This is something openatv changed lately. Never got round to testing or possible fixing it yet.
    And if its different from all other oe-alliance images. Then its not getting fixed until everyone uses the same components code.


    Movie player screen ... there is an option in user interface > settings > show PVR status in movie player infobar


    All my skins on this forum, have a recommend settings section. You would find that info in there :face with rolling eyes:
    RE: *UPDATED* Slyk Onyx 1080 (Install - FAQs)

    I did use the recommended settings! I have "show PVR status" turned on.


    I'll have a look at the code. Though I'm new to enigma so I doubt I'll find the issue. It's not that serious anyway.


    UPDATE: I don't think atv 7.2 likes the Onyx MoviePlayer screen at all - I think it may be using the default screen instead, which is why my changes don't do anything. I could be wrong though.

    I think the EPG mod conflicts with atv 7.2. I removed the mod and it works OK again.

    (I had to copy the original EpgSelection.py over manually.)

    There are various versions of epg selection mod just say for openatv 6.4 then openatv 6.5 and now 7.xx python changes and opeatv team also keep changing things . Try this version it was last mod done by KiddaC
    Personally I have since just replaced EpgSelection.py in enigma2-plugin-extensions-openatv-epgselection-mod_3.1_all.ipk with latest version because I wont be going back to openatv 6.4

    Yes, that seems to fix it. Thanks.

    It turns out the reason I couldn't change the MoviePlayer screen was that I had the Enhanced Movie Center plugin installed and it was using the screen from that instead! (That was so confusing!)


    So I've disabled that, and the Onyx screen is shown now, and all works fine except the playback speed isn't shown. (I've added a simple PVRState widget back as a temporary fix.)

    Quote from Damon Chaplin

    It turns out the reason I couldn't change the MoviePlayer screen was that I had the Enhanced Movie Center plugin installed and it was using the screen from that instead! (That was so confusing!)


    So I've disabled that, and the Onyx screen is shown now, and all works fine except the playback speed isn't shown. (I've added a simple PVRState widget back as a temporary fix.)

    ECM is not even installed on my box not needed as far as I am concerned I even remove it when doing flash online


    via my restore script on openatv
    opkg --force-depends --force-remove remove enigma2-plugin-extensions-enhancedmoviecenter

    I want to update a box for a friend from 6.4 to 7.2 but they want the skin to look exactly the same as with 6.4. I used 1080-r19 back then over 2 years ago and it took a bit of time but looks great. The problem they have is the spinner appearing when FF or RW , hate ads. But I am practising on a Zgemma H7S and that 7.2 is not as easy. I have the skin installed but can install that epg mod 3.1. I tried via install local extension and nothing happens.


    Can I get box back by reinstalling 6.4 and leave 7.2 alone?? Box is an xtrend 10000

    I am doing a million things tonight, but on my to do list is to update one of my boxes to openatv latest.
    I haven't tested the epg mod for a long time. I think urie said it still works though. I maybe wrong

    But see my openatv setup guide if you haven't already. Its a good reference guide.

    Thread
    OpenATV 7.* setup guide by KiddaC
    I have been asked a few times if I can make a new setup guide for latest OpenATV 7.* versions.

    So lets go through the motions again, as a few things have changed since my original OpenATV 6.4 setup guide.

    Although this guide is using openatv image, it can be used as a base for any image. They are all pretty much the same process.

    *note before you start a new flash - a reflash clears most things off your box. Make sure you have copies of all important information before continuing.
    clines, nlines,…
    KiddaC

    ** A person who feels appreciated will always do more than what is expected **

    thumbs up 1
    Quote from bmitie

    I want to update a box for a friend from 6.4 to 7.2 but they want the skin to look exactly the same as with 6.4. I used 1080-r19 back then over 2 years ago and it took a bit of time but looks great. The problem they have is the spinner appearing when FF or RW , hate ads. But I am practising on a Zgemma H7S and that 7.2 is not as easy. I have the skin installed but can install that epg mod 3.1. I tried via install local extension and nothing happens.


    Can I get box back by reinstalling 6.4 and leave 7.2 alone?? Box is an xtrend 10000

    try EpgSelection.py from here RE: Skin Support - Post questions for all my skins in here.

    I think I noticed a tiny bug in the EPG mod code (it resulted in the first bouquet being repeated at the end, or the last bouquet being omitted):


    --- EpgSelection.py.orig 2023-03-15 10:29:59.478050297 +0000

    +++ EpgSelection.py 2023-03-15 10:59:03.492644457 +0000

    @@ -2296,7 +2296,7 @@

    else:

    break;


    - newendbouqlist = self.bouquets[0:index-1]

    + newendbouqlist = self.bouquets[0:index]

    newstartbouqlist = self.bouquets[index+1:listlength]

    finalbouqlist = newstartbouqlist + newendbouqlist

    you keep mentioning different problems but never post a screen shot.

    It is not a bug, that is how its designed. it is because you can keep scrolling and then it wraps around.

    [1][2][3]

    [2][3][1]

    [3][1][2]

    ** A person who feels appreciated will always do more than what is expected **

    Like 1

    Since noone believes me, here are some screenshots! (I just didn't know how to do them before.)


    In the first one it wraps around to "Entertainment" again.

    In the second one "Entertainment" is missing.


    Boring explanation follows:


    You want newendbouqlist to include all the bouquets up to, but not including, the one at index (the one currently shown). This code does that:

    newendbouqlist = self.bouquets[0:index]


    If you use [0:index-1] it doesn't include the one at index-1 either (which explains the missing bouquet in the second screenshot).

    And if you use [0:index-1] when when index is 0 this becomes [0:-1] which includes nearly all the list when you don't want any! (first screenshot)

Enhance your Enigma2 with KiddaC's creations

Download HD skins, IPTV players (X-Streamity, EStalker), bouquet tools, picon managers, and essential plugins for a complete setup. KiddaC's Enigma2 resources: skins (slyk, v-skin, onyx), IPTV plugins (Xtreamity, Jedi Maker), and utilities (E2Piconizer, ScreenNames) for customization and control.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login