ho provato i due comandi che mi hai consigliato ma non va lo stesso b0cd5b6.pnge315f722cdcf.png
[Plugin] VPN Manager
-
- VPN Manager
- W@Rp
- Thread is marked as Resolved.
-
-
Sorry,I don´t now what do you make wrong,but it work´s 100% on ATV 7.0 and please don´t write in Italien on this Thread,only in English,because not all understand Italien.
-
hi, installed clean image in flash I gave the commands from telnet as suggested by dsayers but still does not install the plugin I think the pyton-json needs to be changed -
Please try so, first try to install the latest ipk Plugin and then via telnet the other two comnands
-
Thanks to the master for the command opkg install --force-depends /tmp/enigma2-plugin-extensions-vpnmanager_1.1.6_all.ipk, you can install it perfectly with this one command. ATV7.0 runs perfectly, thank you master
dfdc6c466a56ad6e31f866e.jpg99db1190b525b87a8c1e.jpg9d4ea64dacb1a7670a4d.jpg
-
Per favore prova così, prima prova ad avere l'ultimo plugin ipk e poi via telnet gli altri due comandi
grazie,installato perfettamente ,buona serata
-
First use
Then
Then reboot box
See if that works for openatv 7.0
Not working for me
-
First use
Then
Then reboot box
See if that works for openatv 7.0
Not working for me
What error message are you getting on putty when trying to install the plugin?
Copy and paste the output
-
First use
Then
Then reboot box
See if that works for openatv 7.0
Not working for me
What error message are you getting on putty when trying to install the plugin?
Copy and paste the output
-
First use
Then
Then reboot box
See if that works for openatv 7.0
Not working for me
What error message are you getting on putty when trying to install the plugin?
Copy and paste the output
So the plugin is installed?
What VPN are you using? Purevpn by any chance?
-
First use
Then
Then reboot box
See if that works for openatv 7.0
Not working for me
What error message are you getting on putty when trying to install the plugin?
Copy and paste the output
So the plugin is installed?
What VPN are you using? Purevpn by any chance?
yes mate, using pure vpn
-
Ok purevpn need to update there certificate for openssl
Temporary solution is to add this line to the buttom of your config file
tls-cipher DEFAULT:@SECLEVEL=0
Alternatively to do all files at once use this command and edit PATH to the location of your configs.
-
Well... New receiver (gigablue Trio) with OpenATV 6.4... all up to date... and I have this warning:
Extensions/VpnManager (No module named future)
where do I get that future module?
Thanks!! :thumbup:
Good evening... same problem as Strutch had, but on my VU+ Duo2 with OpenATV 6.4.
It will be one of these dependencies.
Are the files of the dipendencies made availables by Master G at post #209 suitable to my decoder too (mips vs arm)?!?
Thanx a lot
-
Are the files of the dipendencies made availables by Master G at post #209 suitable to my decoder too
Those files will only install on ARM decoders. Use the attached versions instead.
-
Version 1.1.7
-This is only for Python 3 images.
In this version the free mode has also been added.
Thanks murxer
-
Are the files of the dipendencies made availables by Master G at post #209 suitable to my decoder too
Those files will only install on ARM decoders. Use the attached versions instead.
Many thanx Master G: it was sufficient to install the first file (python-future_0.18.2-r0_mips32el.ipk) and the plugin now starts. :thumbup:
Have a good night friends :star:
-
Hi friends,
I'm still in trouble with VPN manager 1.1.6 on my VU+ Duo2 with OpenATV 6.4 :crying1:.
Starting the plugin I'm not able to see anything in the plugin's display, both in the left zone (list of servers) and in the top-right zone (connection data), as you can see in the attached picture.
I can't understand why, but it seems the plugin isn't able to read the files downloaded from NordVPN that I put on usbdrive (/mnt/usb/openvpn). I tried to change pendrive too.
I've tried also to put them in hard disk, but the risult is the same. Clearly I've updated the variuous positions of the file through the "menu"of plugins.
A strange behaviour I've experimented also loading "usr" and "password" through the editing of the file plugin.py... just the correct password appear in the "menu" in the plugin, meanwhile the user mantained an old value. I succeded in inputing the correct value by using the RCU of VU+.
Could be all this due to the inizial lack, during plugin's installation phase, of the dependency python-future_0.18.2-r0_mips32el.ipk ?!?
I've tried also to remove and after reinstall VPN Manager, but I've realized that after reinstallation my old config are still in the box.
Thanx a lot for your tips93aea68c6a8d591e596aee.jpg
-
Have you set all configs in one folder to yes?
-
Have you set all configs in one folder to yes?
Yes dsayers.. tnx
-
Version 1.1.6
only for *ipk
-This is only for Python 3 images.
Thanks murxer
1.1.6 is for python 3 only. OpenATV 6.4 uses python 2. Try an earlier version
Have you set all configs in one folder to yes?
Yes dsayers.. tnx
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!