nc+ card in oscam

Cayman kart CAID 1884 work in oscam cak7 + keyset

Quote

[reader]

label = nc+cay1

protocol = internal

device = /dev/sci0

autospeed = 0

disablecrccws_only_for = 1884:000000

caid = 1884

cwpkkey = xxx

mod1 = xx

idird = xxx

cmd0eprov = xx

mod2 = xx

key3588 = xx

key3460 = xx

key3310 = xx

data50 = xx

mod50 = xx

nuid = xx

cwpkcaid = xx

cwekey0 = xx

cwekey1 = xx

cwekey2 = xx

cwekey3 = xx

cwekey4 = xx

cwekey5 = xx

cwekey6 = xxx

cwekey7 = xx

evensa = 1

cak7_mode = 1

. . . . .

Display More

Agree, i own Cayman and relevant keys for it.Works like a charm in Oscam

Oscam by Jej@n ,oscam smod,conax CWPK

Hi KO,

I am running the same in E2 box using oscam. You will need the RSA key from your provider. However I have noticed that from the beginning of this month my card has stopped taking emms so hopefuly this is not the begining of the end:crying:

End for rsa pairing not yet on conax. must be problem related to your subscription

HI moustafa86,

You are correct. Provider had to reissue emms as the basic pack had expired but the premium was still running.

Now all is ok. I was worried there for a while.

Thanks

Quote from hs5424

HI moustafa86,

You are correct. Provider had to reissue emms as the basic pack had expired but the premium was still running.

Now all is ok. I was worried there for a while.

Thanks

can you please share more informations

i have nc+ card with rsa stop working, only tvp1hd and some basic channels work

how did you fix the issue?

Ask your card supplier to re issue the emms. Leave the box on TVP1 HD.

i fix it by sending old emm unique to the card and get shared emm

it's time to block getting new emm unique because it's force change rsa

yes thats known since 8 years hehe

Hi Nofake,

How do I force the emm-u .

Any of you guys have oscam config for the nc+ card conax. Mine is acting strange when it takes emms at the beginning of the month. Not all packs update.

Quote from nofake

i fix it by sending old emm unique to the card and get shared emm

it's time to block getting new emm unique because it's force change rsa

True. I had to do the same to make my conax 0b01 card decode all channels again. The problem is that I can't calculate new RSA by old method anymore because I don't get the needed RX data 90 12 on channels anymore. NC+ must have changed way to calculate RSA keys..... :-(

Thanks for getting back to me. Here is my config now. I have changed saveemm-u to 0. is this correct and will I need to have the supplier resend a refresh emm to the card.

[reader]

label = NC +

protocol = internal

device = /dev/sci0

caid = 0B01

rsakey = wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww

detect = cd

mhz = 450

cardmhz = 450

ident = 0B01:000000

group = 1

emmcache = 1,5,2,0

blockemm-unknown = 1

saveemm-u = 0

saveemm-s = 1

saveemm-g = 1

auprovid = 000B01

@hs5424

No, it's not correct. Now new EMM-U won't be saved to log ....

You should keep it on 1 and also block EMM-U by setting it to 1.

If the provider sends new U-EMMs and change RSA then you probably can't calc new RSA anymore ...

Quote from tomek6680

Cayman kart CAID 1884 work in oscam cak7 + keyset

Hi, can you share the keyset config?