nc+ card in oscam
-
- Conax Cards OSCam
- kobyr
- Thread is marked as Resolved.
-
-
so-called CAYMAN cannot be launched on any emu or decoder, only with operator decoder works
you can choose this option:
Cameleon
SMART+ HD
-
thanks for your answer
the smart+HD "N" card works on oscam?
need rsa key ?
the dealer says the card "cyfra" is no longer available for prolong. is this true?
-
Cayman kart CAID 1884 work in oscam cak7 + keyset
Quote[reader]
label = nc+cay1
protocol = internal
device = /dev/sci0
autospeed = 0
disablecrccws_only_for = 1884:000000
caid = 1884
cwpkkey = xxx
mod1 = xx
idird = xxx
cmd0eprov = xx
mod2 = xx
key3588 = xx
key3460 = xx
key3310 = xx
data50 = xx
mod50 = xx
nuid = xx
cwpkcaid = xx
cwekey0 = xx
cwekey1 = xx
cwekey2 = xx
cwekey3 = xx
cwekey4 = xx
cwekey5 = xx
cwekey6 = xxx
cwekey7 = xx
evensa = 1
cak7_mode = 1. . . . .
-
Agree, i own Cayman and relevant keys for it.Works like a charm in Oscam
-
Hello
i am instersting to buy new STB+card NC+
the model of the STB ADB 2850
and the card is conax.
anyone know if the card will work on oscam?
and if needed special config ?
thanks
kobyr
-
-
Hi KO,
I am running the same in E2 box using oscam. You will need the RSA key from your provider. However I have noticed that from the beginning of this month my card has stopped taking emms so hopefuly this is not the begining of the end:crying:
-
End for rsa pairing not yet on conax. must be problem related to your subscription
-
HI moustafa86,
You are correct. Provider had to reissue emms as the basic pack had expired but the premium was still running.
Now all is ok. I was worried there for a while.
Thanks
-
HI moustafa86,
You are correct. Provider had to reissue emms as the basic pack had expired but the premium was still running.
Now all is ok. I was worried there for a while.
Thanks
can you please share more informations
i have nc+ card with rsa stop working, only tvp1hd and some basic channels work
how did you fix the issue?
-
Ask your card supplier to re issue the emms. Leave the box on TVP1 HD.
-
i fix it by sending old emm unique to the card and get shared emm
it's time to block getting new emm unique because it's force change rsa
-
yes thats known since 8 years hehe
-
Hi Nofake,
How do I force the emm-u .
-
Any of you guys have oscam config for the nc+ card conax. Mine is acting strange when it takes emms at the beginning of the month. Not all packs update.
-
i fix it by sending old emm unique to the card and get shared emm
it's time to block getting new emm unique because it's force change rsa
True. I had to do the same to make my conax 0b01 card decode all channels again. The problem is that I can't calculate new RSA by old method anymore because I don't get the needed RX data 90 12 on channels anymore. NC+ must have changed way to calculate RSA keys..... :-(
-
Thanks for getting back to me. Here is my config now. I have changed saveemm-u to 0. is this correct and will I need to have the supplier resend a refresh emm to the card.
[reader]
label = NC +
protocol = internal
device = /dev/sci0
caid = 0B01
rsakey = wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
detect = cd
mhz = 450
cardmhz = 450
ident = 0B01:000000
group = 1
emmcache = 1,5,2,0
blockemm-unknown = 1
saveemm-u = 0
saveemm-s = 1
saveemm-g = 1
auprovid = 000B01
-
-
master G
Added the Label Conax Cards OSCam -
Cayman kart CAID 1884 work in oscam cak7 + keyset
Hi, can you share the keyset config?
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!