nc+ card in oscam
-
- Conax Cards OSCam
- kobyr
- Thread is marked as Resolved.
-
-
so-called CAYMAN cannot be launched on any emu or decoder, only with operator decoder works
you can choose this option:
Cameleon
SMART+ HD
-
thanks for your answer
the smart+HD "N" card works on oscam?
need rsa key ?
the dealer says the card "cyfra" is no longer available for prolong. is this true?
-
Cayman kart CAID 1884 work in oscam cak7 + keyset
Quote[reader]
label = nc+cay1
protocol = internal
device = /dev/sci0
autospeed = 0
disablecrccws_only_for = 1884:000000
caid = 1884
cwpkkey = xxx
mod1 = xx
idird = xxx
cmd0eprov = xx
mod2 = xx
key3588 = xx
key3460 = xx
key3310 = xx
data50 = xx
mod50 = xx
nuid = xx
cwpkcaid = xx
cwekey0 = xx
cwekey1 = xx
cwekey2 = xx
cwekey3 = xx
cwekey4 = xx
cwekey5 = xx
cwekey6 = xxx
cwekey7 = xx
evensa = 1
cak7_mode = 1. . . . .
-
Agree, i own Cayman and relevant keys for it.Works like a charm in Oscam
-
Hello
i am instersting to buy new STB+card NC+
the model of the STB ADB 2850
and the card is conax.
anyone know if the card will work on oscam?
and if needed special config ?
thanks
kobyr
-
-
Hi KO,
I am running the same in E2 box using oscam. You will need the RSA key from your provider. However I have noticed that from the beginning of this month my card has stopped taking emms so hopefuly this is not the begining of the end:crying:
-
End for rsa pairing not yet on conax. must be problem related to your subscription
-
HI moustafa86,
You are correct. Provider had to reissue emms as the basic pack had expired but the premium was still running.
Now all is ok. I was worried there for a while.
Thanks
-
HI moustafa86,
You are correct. Provider had to reissue emms as the basic pack had expired but the premium was still running.
Now all is ok. I was worried there for a while.
Thanks
can you please share more informations
i have nc+ card with rsa stop working, only tvp1hd and some basic channels work
how did you fix the issue?
-
Ask your card supplier to re issue the emms. Leave the box on TVP1 HD.
-
i fix it by sending old emm unique to the card and get shared emm
it's time to block getting new emm unique because it's force change rsa
-
yes thats known since 8 years hehe
-
Hi Nofake,
How do I force the emm-u .
-
Any of you guys have oscam config for the nc+ card conax. Mine is acting strange when it takes emms at the beginning of the month. Not all packs update.
-
i fix it by sending old emm unique to the card and get shared emm
it's time to block getting new emm unique because it's force change rsa
True. I had to do the same to make my conax 0b01 card decode all channels again. The problem is that I can't calculate new RSA by old method anymore because I don't get the needed RX data 90 12 on channels anymore. NC+ must have changed way to calculate RSA keys..... :-(
-
Thanks for getting back to me. Here is my config now. I have changed saveemm-u to 0. is this correct and will I need to have the supplier resend a refresh emm to the card.
[reader]
label = NC +
protocol = internal
device = /dev/sci0
caid = 0B01
rsakey = wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
detect = cd
mhz = 450
cardmhz = 450
ident = 0B01:000000
group = 1
emmcache = 1,5,2,0
blockemm-unknown = 1
saveemm-u = 0
saveemm-s = 1
saveemm-g = 1
auprovid = 000B01
-
-
master G
Added the Label Conax Cards OSCam -
Cayman kart CAID 1884 work in oscam cak7 + keyset
Hi, can you share the keyset config?
OSCam Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!