Support for SubSupport (and more...)

There are 27 replies in this Thread which was already clicked 3,577 times. The last Post () by gorski.

    This is a Q for coders.... ;)

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 1

    Hi Gorski & FrancHR, recently I found the harddisk in my Duo2 is spinning all the time. I wonder is it because I had setup the “Log Setting”?


    I then changed the setting in the “Log Setting” to stop the log debugging, but to no avail. Please tell me what setting must I change to stop the harddisk from spinning all the time? Thank you

    Mounting devices/partitions in PurE2's Device Manager and which files to send where!

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 1

    Hi Gorski, thank you for the quick reply.


    All along, I had set the harddisk to standby after 2 minutes, and with this setting alone it seem insufficient. My present attached devices are as follows,

    • Usb flashdrive-for E2iPlayer-mostly for buffering
    • Internal harddisk- all timer recordings and downloads

    After reading through the recommended webpage, I feel you are advising me set “Kill Automounting”. So should I set “Kill Automount” to both the above devices?


    Please advise.


    Best Regards

    We have had some trouble with Device Manager but it should be OK now, so that part should be working OK.


    Then, yes - kill automount but do not restart yet.


    Mount HDD as /hdd and USB as /usb and then restart (do not boot/mount from FSTAB but second option - restart your box!


    When it reboots, check if it works OK, as you want it to be. Then, you have permanent mounts, not "dynamic" ones. No swapping places will take place, that is the point. If HDD and USB swap places during reboot a lot of your stuff would be f@#&ed up...


    Good luck!


    P.S. I set the "HDD to sleep" after 5 minutes.

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 1

    If one has problems with OpenSubtitles lately one should give the following telnet command, for instance using PuTTy:


    Code
    opkg update &&  opkg install enigma2-plugin-extensions-subssupport  --force-reinstall


    In PurE2, which I just tested, it will install 1.5.6_x version and this should work OK, at least in most STBs/E2s.


    However, the latest version is 1.5.7, found here:


    Code
    https://github.com/mx3L/subssupport/commit/ea89cd8690467413b0be2614aeeba552f0cc674b


    Github page is here:


    Code
    https://github.com/mx3L/subssupport


    Plugin download is here:


    Code
    https://github.com/mx3L/subssupport/tree/master/plugin


    Thanx to athoik (author of the plugin) and contributors, plus .:T3O:. for info!


    Good luck!

    "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. This immaturity is self-incurred if its cause is not lack of understanding, but lack of resolution and courage to use it without the guidance of another. The motto of enlightenment is therefore: Sapere aude! Have courage to use your own understanding!"


    http://www.columbia.edu/acis/ets/CCREAD/etscc/kant.html

    Like 2

PurE2 Team Images Support Forum ~ based on OE-Alliance

PurE2 Supported Models ~

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login