For this you need a t2mi capable receiver, and an image that supports t2mi scanning like openatv. I don't have such a receiver.
thank you so much brother .. i have vu+ solo se and an image openatv 6.4
There are 426 replies in this Thread which was already clicked 80,396 times. The last Post () by Confederate.
For this you need a t2mi capable receiver, and an image that supports t2mi scanning like openatv. I don't have such a receiver.
thank you so much brother .. i have vu+ solo se and an image openatv 6.4
If I complete the parameter in the photo and scan Abertis DTT frequency then is visible with my Octagon sf 8008? This parameter are known,
are secret? There are for example the parameter for Italian channel 5^ W.
hi.. hope thats fine...
its possible to create this channels:
Intelsat 901 @ 27.5° W
11608 V
DVB-S2/16APSK |
6532 3/4 |
siminn tv
they work under iptv too
ciefp added a new version:
QuoteDisplay More:: ciefpsettings E2 ::
:: Abertis - RTRS ::
..:: 26.03.2022 ::..
#ciefpsettingse2
Update astra.conf
Update settings
##### RTRS T2-Mi 54,9E #####
RTRS 12635 V package left
•••••| 5,0 W - EUTELSAT 5 |••••• :: 42 ::
12585 H DVB-S2
T2-MI, PLP 0 8PSK
Stream 20 35500 2/3
RL Piemonte 1,
- Top Calcio 24
- VideoGruppo
- Sesta Rete
- Telecupole
- Primantenna
- Canale Italia Piemonte
- Canale Italia
- Telecity
- 7+ Channel
- Rete Sette
- GRP TV- Italy
- VCO Azzurra TV
- Videonovara
- Quartarete Blu
- France 2 HD
- RTS Un HD
- TV5 Monde Europe HD
ciefpsettings-enigma2-Abertis-RTRS t2mi 26.03.2022
QuoteDisplay More•••••| 5,0 W - EUTELSAT 5 |••••• :: 42 ::
12585 H DVB-S2
T2-MI, PLP 0 8PSK
Stream 20 35500 2/3
RL Piemonte 1,
- Top Calcio 24
- VideoGruppo
- Sesta Rete
- Telecupole
- Primantenna
- Canale Italia Piemonte
- Canale Italia
- Telecity
- 7+ Channel
- Rete Sette
- GRP TV- Italy
- VCO Azzurra TV
- Videonovara
- Quartarete Blu
- France 2 HD
- RTS Un HD
- TV5 Monde Europe HD
I can see the SD channel, but the last 3 HD channels do not show. Are they encrypted?
Display Morehi.. hope thats fine...
its possible to create this channels:
Intelsat 901 @ 27.5° W
11608 V
DVB-S2/16APSK
6532 3/4 siminn tv
they work under iptv too
has been added?
Hi ciefp .
Could you add in your motor settings t2Mi version the dtt italian channels as others list available here?? Many people would appreciate it...😉
All my settings support multistream channels also t2mi via streamrelay. Here in this topic I separate settings only when there is a change in astra.conf. When there is no change in the astra.conf file you can comfortably use settings from another topic:
Hi ciefp .
Could you add in your motor settings t2Mi version the dtt italian channels as others list available here?? Many people would appreciate it...😉
All my settings support multistream channels also t2mi via streamrelay. Here in this topic I separate settings only when there is a change in astra.conf. When there is no change in the astra.conf file you can comfortably use settings from another topic:
Hi ciefp .
Could you add in your motor settings t2Mi version the dtt italian channels as others list available here?? Many people would appreciate it...😉
All my settings support multistream channels also t2mi via streamrelay. Here in this topic I separate settings only when there is a change in astra.conf. When there is no change in the astra.conf file you can comfortably use settings from another topic:
Yes, i know. But i intend that your settings don't support DVBT-2 Italian channel (like Srbjia-Cacak-Ovcar in your settings).
QuoteYes, i know. But i intend that your settings don't support DVBT-2 Italian channel (like Srbjia-Cacak-Ovcar in your settings).
I don't have a receiver that has a dvb-t2 tuner, I'm also not in Italy to be able to scan those channels. You can do it yourself, take off the settings of vhanibal and transfer to your settings only that bouquet that has those channels
.
hello ciefp
can you please add siminn sport on 27,5west (if possible)
thank you very much
best regards
Display Morehello ciefp
can you please add siminn sport on 27,5west (if possible)
thank you very much
best regards
I don't have a signal at the moment. When the signal comes, I'll try. I have such a situation that I have a signal for a month and then not for a month or two.
ciefp added a new version:
QuoteDisplay More:: ciefpsettings E2 ::
:: Abertis - RTRS ::
..:: 17.04.2022 ::..
#ciefpsettingse2
Update astra.conf
Update settings
##### RTRS T2-Mi 54,9E #####
New Freq
RTRS Orel 12602 v
- GTRK Orel
- Rossiya 24 Orel
- OTR
RTRS Belgorod 12609 v
- GTRK Belgorod
- Rossiya 24 Belgorod
- OTR Mir Belgorya
ciefp added a new version:
QuoteDisplay More:: ciefpsettings E2 ::
:: Abertis - RTRS ::
..:: 08.05.2022 ::..
#ciefpsettingse2
Update astra.conf
Update settings
##### RTRS T2-Mi 54,9E #####
New Freq
RTRS Tula
12628 v
- Rossiya 1
- Rossiya 24
- OTR
- Radio Rossii
I have an account on github, I created the file astra.conf. Which I will maintain regularly. It wouldn't be bad if someone created a wget script to copy this file to /etc/astra. I think it would be easier for everyone.
I have an account on github, I created the file astra.conf. Which I will maintain regularly. It wouldn't be bad if someone created a wget script to copy this file to /etc/astra. I think it would be easier for everyone.
Much appreciation for your work
wget script to copy file to /etc/astra as follows :
i already try it
root@vuzero4k:~# wget https://raw.githubusercontent.com/ciefp/astra.conf/main/astra.conf -P /etc/astra/
Connecting to raw.githubusercontent.com (185.199.108.133:443)
saving to '/etc/astra/astra.conf'
astra.conf 100% |********************************| 28137 0:00:00 ETA
'/etc/astra/astra.conf' saved
root@vuzero4k:~#
Display MoreI have an account on github, I created the file astra.conf. Which I will maintain regularly. It wouldn't be bad if someone created a wget script to copy this file to /etc/astra. I think it would be easier for everyone.
Much appreciation for your work
wget script to copy file to /etc/astra as follows :
i already try it
root@vuzero4k:~# wget https://raw.githubusercontent.com/ciefp/astra.conf/main/astra.conf -P /etc/astra/
Connecting to raw.githubusercontent.com (185.199.108.133:443)
saving to '/etc/astra/astra.conf'
astra.conf 100% |********************************| 28137 0:00:00 ETA
'/etc/astra/astra.conf' saved
root@vuzero4k:~#
Excellent, one question though, the file is copied as 644, is it possible to send it directly as 755? Thanks
Excellent, one question though, the file is copied as 644, is it possible to send it directly as 755? Thanks
The problem occurs when a file already exists, and when copied with this command the new file is renamed to astra.conf.1. So this new file is not usable. It is necessary to delete the existing file with one script first and then copy it with the other one.
Don’t have an account yet? Register yourself now and be a part of our community!