ciefpsettings-enigma2 Abertis 30W Streamrelay

Sorry you're right. The decoder is an octagon sf4008 4k with satdream 8 image. I have performed all the steps in your guide. Abertis channels and all Streamrelays are seen but often there is no sound.

I use oscam-emu with the right softcam keys. I repeat to you the streamrelay channels are seen but often the audio is missing. Every now and then on some channel the audio comes back on.

I tried with openATV but you can't see the channels at all, completely black screen. I'll do a test with openeight

Quote from saturnino91xxx

I tried with openATV but you can't see the channels at all, completely black screen. I'll do a test with openeight

My dear friend,,it works well with openAtv..I suggest you use the channels list (ciefp) provided by the openatv plugin.. settings and check other settings again

so guys i mounted openeight and now everything works but i have problems on some UK channels of 27.5W (i don't see some BBCs). Do you advise me to check everything (the parameters) with dreambox edit?

Hello, I have tried to mix a list of sorys with that of cief and in astra some channels come out with the audio in English when if I put only the one of sorys they come out in Spanish, why is that?

ciefp I 'm using your settings for more than a month and everything run smoothly.
I updated them since you 've included the Zeonbud T2Mi 12073 H 27500 3/4 package.
I can only clear them on OPENAtv images.
Neither on Openpli nor on Pure2. In fact on both of them when i try to tune my positioner shuts down. Do you have a clue why is that happening?
My receiver is Mut@nt HD66SE

Thanks in advance

So do i have to do some special settings?
On streamrelay maybe?

ciefp could you add canal+ sport360 and canal +foot to the canalsat package (19.2e)? Thanks in advance

ciefp! Greetings my dear friend and thanks for your support...

Now, I have this situation where when I try to change channels, the box automatically goes back to the previous (last) channel I was watching(it occurs in few seconds). being using your channels list for years and continue to recommend it to others..so how do I resolve this?

It happens in openAtv and Egami and the box is Zgemma H9S

Quote from Yawwilson

ciefp! Greetings my dear friend and thanks for your support...

Now, I have this situation where when I try to change channels, the box automatically goes back to the previous (last) channel I was watching(it occurs in few seconds). being using your channels list for years and continue to recommend it to others..so how do I resolve this?

It happens in openAtv and Egami and the box is Zgemma H9S

Found solution... AJ panel plugin was responsible..after uninstall everything began working perfectly

Quote from Yawwilson

Found solution... AJ panel plugin was responsible..after uninstall everything began working perfectly

Fixed, to be released at next version

Hello, with the Abertis 30w satellite channels, do they all work for me, except TV3, TV3HD, SUPER 3, 3/24 and IBB, do those channels work? or is it my mistake?

By the way Masteg, wrote in English. the only thing that the translator had active and I changed it to Spanish

Solved, I have updated the astra.conf of ciefp :)

Thanks ciefp for your work

Before when I use openATV 6.4 on my octagon sf4008 with ABERTIS and BBC packages it was fine everything working well with all configurations (opkg install astra-sm) certainly with oscam emu. Now when I change openATV for 7.1 python 3 and I try installing the same configuration with oscam everything working not good..abertis working to first shut down reciever later I have black screen or don't have voice. All configuration must working with Freeserver also. Softcam.key I put to folder usr/keys. Some solutions what happens and why?

Quote from antonio426

Before when I use openATV 6.4 on my octagon sf4008 with ABERTIS and BBC packages it was fine everything working well with all configurations (opkg install astra-sm) certainly with oscam emu. Now when I change openATV for 7.1 python 3 and I try installing the same configuration with oscam everything working not good..abertis working to first shut down reciever later I have black screen or don't have voice. All configuration must working with Freeserver also. Softcam.key I put to folder usr/keys. Some solutions what happens and why?

Try doing a fresh installation without any plugin (free server and AJ panel) and use default skin (original skin)...I believe it would work..